DANCO 10569 Dishwasher Air Gap Instructions
- June 9, 2024
- DANCO
Table of Contents
INSTALLATION INSTRUCTIONS FOR
DISHWASHER AIR GAP
10569 Dishwasher Air Gap
Visit
DANCO.COM
for Easy D.I.Y. Solutions
Instructions
Tools Required: Screwdriver, Hose Clamps
Removal of Old Air Gap
- Remove the Air Gap Cap (A).
- Remove the Top Nut (B).
- Detach the Disposal Hose (F) and Dishwasher Hose (E) from the Air Gap by loosening clamps.
- Remove the old Air Gap.
Air Gap Installation
- Remove the Cap (A), Top Nut (B) and Washer (C) from the new Air Gap.
- Adjust the Bottom Nut (D) to allow for sink top thickness. Allow ½” of threaded section to project above the sink top.
- Connect Disposal Hose (F) and Dishwasher Hose (E) to the Air Gap and tighten clamps.
- Insert the stem of the Air Gap through hole in sink.
- Place the Washer (C) on Air Gap top and then screw on Top Nut (B).
- Press on Air Gap Cap (A).
©2022 Manufactured for
Danco, Inc., Irving, TX 75062
Made in China
10924i/10925i/10569i/11092i
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>