DANCO Toilet Tank Lever Instruction Manual
- June 13, 2024
- DANCO
Table of Contents
DANCO Toilet Tank Lever
Product Description
*Image shows Straight Lever Handle Style. Instructions apply to Straight, Curved and Decorative Handle Styles.
Installation Instructions
Remove old lever.
-
Adjustability
-
For left front or left side mount, position T mark on top.
For left vertical mount, position T2 mark on top. -
Push arm assembly (0) to the end and rotate until the arrow points to the groove = unlock. Unthread the locknut (C) clockwise.
-
Insert handle assembly (A). Hand-tighten locknut (C). (Reverse thread; left = tight)
-
Attach arm assembly (0). Align arrows on (0) with grooves on handle assembly (A); Push (0) to the end and rotate to proper position.
-
Press red button and lift arm assembly (0) to adjust so it won’t hit tank lid or rub on sides of tank when flushing. Attach chain to appropriate hole in arm assembly (0) leaving about 1/2 inch of slack with flapper closed. Test by flushing and adjust chain and arm for optimal performance.
Customer Support
il:>2022 Manufactured for
Danco, Inc., llvlng, TX 75062
Made in China/Hecho en China
12044i/12046i/12048i/12052i/12059i/
12060i/12061i/12062i/12063i/12064i