MONSTER 05900002 Table Mount Keyboard Bridge Instruction Manual
- June 4, 2024
- Monster
Table of Contents
MONSTER 05900002 Table Mount Keyboard Bridge
GENERAL ASSEMBLY INFO AND HOW TO INSTALL
PROFILE NUTX
HEX KEY SET WITH BALL HEAD + EXTENSION OR SIMILAR REQUIRED
UNIVERSAL CONNECTOR
ALTERNATIVE
BOLT DIMENSIONS AND HOW TO MEASURE THEM [mm]
PROFILE CAP ASSEMBLY
PARTS
BAG 1
BAG 2
ASSEMBLY
QUICK RELEASE
OPTIONAL INSTRUMENT CARRIER
PARTS
INSTRUMENT CARRIER ASSEMBLY
- CAUTION! Do not clamp your fingers while attaching the table mount keyboard bridge.
- CAUTION! Check before usage if all screws are tightened.
- CAUTION! Check before usage that the mounting plate is screwed on tight after making height adjustments.
- DANGER: Contains small parts not suitable for children under 3 years.
Only suitable for children over 12 years and adults. All MTSIM products are hand assembled and quality checked. The mount is designed for usage only with a computer controller (e.g. joystick or throttle). We exclude liability if the product is used for purposes other than intended. MTSIM shall be liable for damage arising from causes other than the detriment to life, body and health only to the extent that such damage arises from wilful misconduct, gross negligence, or the culpable violation of a fundamental contractual obligation on the part of MTSIM or a vicarious agent (e.g. the delivery service) of MTSIM. Any further liability for damages shall be excluded. If you have safety concerns or questions regarding assembly, contact us at info@mtsim.com or visit www.mtsim.com/en/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>