Legrand 817TCAL-BZ Omni Box Flange Instruction Manual

Legrand 817TCAL-BZ Omni Box Flange

Product Information

The OmniBox Series Floor Boxes are fully adjustable, multiple service floor boxes designed to provide protection from water, dirt, and debris. They feature an aesthetically pleasing flush activation cover and are available in different models with varying specifications.

Features & Benefits

• Vertical Markets
• Compliance with Metallic Outlet Boxes File E2961, Guide QCIT, Boxes & Covers UL514A, 514C, 514D & Canadian standard C22.2
• Protection from water, dirt, and debris

OmniBox Series Floor Boxes Models:

Model| Dimensions| Conduit Openings| Cubic Inch Adjustment Capacity Before Pour| Adjustment After Pour| Country of Origin
---|---|---|---|---|---
880S1| 3 23/32 (94mm) x 4 13/16 (122mm) x 3 15/32 (88mm)| (3) 1/2 (12.7mm), (5) 3/4 (19.1mm)| 53 cubic inches| 1/2 (12.7mm)| Mexico
880S2| 4 13/16 (122mm) x 7 15/16 (202mm) x 3 15/32 (88mm)| (4) 1/2 (12.7mm), (8) 3/4 (19.1mm)| 117 cubic inches| 1/2 (12.7mm)| Mexico
880S3| 4 13/16 (122mm) x 3 15/32 (88mm)| (5) 1/2 (12.7mm), (11) 3/4 (19.1mm)| 180 cubic inches| 1/2 (12.7mm)| Mexico
880M1| 3 23/32 (94mm) x 4 13/16 (122mm) x 2 15/32 (63mm)| (5) 1/2 (12.7mm), (5) 3/4 (19.1mm)| 37 cubic inches| 1/2 (12.7mm)| Mexico
880M2| 4 13/16 (122mm) x 7 15/16 (202mm) x 2 15/32 (63mm)| (8) 1/2 (12.7mm), (8) 3/4 (19.1mm)| 80 cubic inches| 1/2 (12.7mm)| Mexico
880M3| 4 13/16 (122mm) x 12 (305mm) x 2 15/32 (63mm)| (11) 1/2 (12.7mm), (11) 3/4 (19.1mm)| 126 cubic inches| 1/2 (12.7mm)| Mexico
880CS1-1| 4 3/8 (111mm) x 5 3/16 (132mm) x 3 7/16 (87mm)| (4) 1 (25mm)| 48 cubic inches| 1/2 (12.7mm)| China
880CS2-1| 5 3/16 (132mm) x 8 1/2 (216mm) x 3 7/16 (87mm)| (6) 1 (25mm)| 94 cubic inches| 1/2 (12.7mm)| China
880CS3-1| 5 3/16 (132mm) x 12 1/2 (318mm) x 3 7/16 (87mm)| (8) 1 (25mm)| 160 cubic inches| 1/2 (12.7mm)| China
880CS1-NA| 4 3/8 (111mm)| (4) 1 (25mm)| 48 cubic inches| 1/2 (12.7mm)| China

Product Usage Instructions

1. Select the appropriate OmniBox Series Floor Box model based on your requirements.
2. Ensure that the floor box is installed in a suitable location to provide access to electrical and communication services.
3. Prepare the installation area by removing any obstructions and ensuring a clean, level surface.
4. If necessary, adjust the conduit openings on the floor box to accommodate the desired electrical or communication connections.
5. Before pouring concrete, adjust the cubic inch capacity of the floor box to meet your specific needs.
6. After pouring concrete, make any final adjustments to the conduit openings and ensure that the adjustment after pour is set to the desired specifications.
7. Ensure that the floor box cover is securely in place to provide protection from water, dirt, and debris.
8. Regularly inspect and maintain the OmniBox Series Floor Box to ensure proper functioning and longevity.

Fully Adjustable, Multiple Service, Floor Boxes
OmniBox™ Series Floor Boxes provides an excellent activation solution when multiple services are required in open space areas. OmniBox™ Series Floor Boxes offer one-, two-, and three-gang multi-service boxes that are fully adjustable before and after the concrete pour.
Available in both stamped steel and cast iron fabrications, they meet a wide range of workstation requirements for today’s and tomorrow’s service needs. These floor boxes have many applications, some of which include schools, financial institutions, and commercial office buildings. .

Two-gang OmniBox Series Floor Box Installation with an aesthetically pleasing flush activation cover.

Features & Benefits

• Fully adjustable box. Fully adjustable both before and after concrete pour. Reduces installation costs.
• Two Fabrications: Stamped Steel – Lower cost concrete- tight construction option for above grade applications. Cast-Iron – Watertight construction for on or below grade applications.
• Available in two depths. Economical alternatives when pour depths are limited.
• Flush activation assemblies for carpet and tile. Aesthetically pleasing assemblies are interchangeable in both cast-iron and stamped steel box models.
• Available in one-, two-, and three-gang configurations. Removable dividers increase capacity. More configurations to support multi-service applications.
• Triple service boxes. Accommodates power, communication and/or audio/video devices which reduces the need for multiple boxes.
• Brushed aluminum covers for power applications. 830CK Series Aluminum Covers redesigned to accept threaded conduit when passing through power cables.
• Brass and brushed aluminum covers accept single locking power receptacles. New 828DLR Series provides single flip lid cover.
• 828COMTC Series Cover Kit in brass and brushed aluminum. Allows communication devices to be recessed into 880S and 880CS Series Floor Boxes.
• Partition support kit for 3-gang tile flanges. The 838TAL-880 Series Flanges provide partition supports in tile applications for added strength and durability.
• TopGuard protection. All cover assemblies for the OmniBox Floor Box Series have TopGuard protection. An integral design which keeps out water, dirt, and debris from the power and communication compartments.
• Boxes and covers have been listed by Underwriters Laboratories Inc. to their standard UL514A, 514C, 514D, and Canadian standard C22.2
• Datacom connectivity options. Accepts industry standard and proprietary devices from a wide range of manufacturers to provide a seamless and aesthetically pleasing interface for voice, data, audio, and video applications at the point-of-use. A wide selection of data and adapter options available for use with Ortronics® TracJack® and Series II devices.

Vertical Markets

• Commercial
• Education
• Government
• Healthcare
• Retail

Compliance

Metallic Outlet Boxes File E2961, Guide QCIT,
Boxes & Covers UL514A, 514C, 514D & Canadian standard C22.2.

OmniBox Series Stamped Steel Floor Boxes Ordering Information

880S1

One-Gang Stamped Steel Floor Box – Fully Adjustable.

TECHNICAL SPECIFICATIONS| | |
---|---|---|---

Conduit Openings

| Cubic Inch Capacity| Adjustment Before Pour| Adjustment After Pour
(3) 1/2″ (12.7mm), (5) 3/4″ (19.1mm)

(2) 1″ (25mm)

| 53| 1 3/4″ (44mm)| 1/2″ (12.7mm)

Country of Origin: Mexico

880S2 Two-Gang Stamped Steel Floor Box – Fully Adjustable.

TECHNICAL SPECIFICATIONS| | |
---|---|---|---

Conduit Openings

| Cubic Inch Capacity| Adjustment Before Pour| Adjustment After Pour
(4) 1/2″ (12.7mm), (8) 3/4″ (19.1mm)

(4) 1″ (25mm)

| 117 (58/59)| 1 3/4″ (44mm)| 1/2″ (12.7mm)

Country of Origin: Mexico

880S3 Three- Gang Stamped Steel Floor Box – Fully Adjustable.

TECHNICAL SPECIFICATIONS| | |
---|---|---|---

Conduit Openings

| Cubic Inch Capacity| Adjustment Before Pour| Adjustment After Pour
(5) 1/2″ (12.7mm), (11) 3/4″ (19.1mm)

(6) 1″ (25mm)

| 180 (56/68/56)| 1 3/4″ (44mm)| 1/2″ (12.7mm)

Country of Origin: Mexico

OmniBox Series Shallow Stamped Steel Floor Boxes Ordering Information

880M1 One-Gang Shallow Stamped Steel Floor Box – Fully Adjustable.

TECHNICAL SPECIFICATIONS| | |
---|---|---|---

Conduit Openings

| Cubic Inch Capacity| Adjustment Before Pour| Adjustment After Pour
(5) 1/2″ (12.7mm),

(5) 3/4″ (19.1mm)

| 37| 1 3/4″ (44mm)| 1/2″ (12.7mm)

Country of Origin: Mexico

880M2 Two-Gang Shallow Stamped Steel Floor Box – Fully Adjustable.

TECHNICAL SPECIFICATIONS| | |
---|---|---|---

Conduit Openings

| Cubic Inch Capacity| Adjustment Before Pour| Adjustment After Pour
(8) 1/2″ (12.7mm),

(8) 3/4″ (19.1mm)

| 80

40/40

| 1 3/4″ (44mm)| 1/2″ (12.7mm)

Country of Origin: Mexico

880M3 Three- Gang Shallow Stamped Steel Floor Box – Fully Adjustable.

TECHNICAL SPECIFICATIONS| | |
---|---|---|---

Conduit Openings

| Cubic Inch Capacity| Adjustment Before Pour| Adjustment After Pour
(11) 1/2″ (12.7mm),

(11) 3/4″ (19.1mm)

| 126

39/48/39

| 1 3/4″ (44mm)| 1/2″ (12.7mm)

Country of Origin: Mexico

OmniBox Series Cast Iron Floor Boxes Ordering Information

880CS1-1 One-Gang Cast Iron Floor Box – Fully Adjustable.

TECHNICAL SPECIFICATIONS| | |
---|---|---|---

Conduit Openings

| Cubic Inch Capacity| Adjustment Before Pour| Adjustment After Pour
(4) 1″ (25mm)| 48| 1 3/4″ (44mm)| 1/2″ (12.7mm)

Country of Origin: China

880CS2-1 Two-Gang Cast Iron Floor Box – Fully Adjustable.

TECHNICAL SPECIFICATIONS| | |
---|---|---|---

Conduit Openings

| Cubic Inch Capacity| Adjustment Before Pour| Adjustment After Pour
(6) 1″ (25mm)| 94 (45/49)| 1 3/4″ (44mm)| 1/2″ (12.7mm)

Country of Origin: China

880CS3-1 Three- Gang Cast Iron Floor Box – Fully Adjustable.

TECHNICAL SPECIFICATIONS| | |
---|---|---|---

Conduit Openings

| Cubic Inch Capacity| Adjustment Before Pour| Adjustment After Pour
(8) 1″ (25mm)| 160 (53/54/53)| 1 3/4″ (44mm)| 1/2″ (12.7mm)

OmniBox Series North America Made Cast Iron Floor Boxes Ordering

Information

880CS1-NA North America Made One-Gang Cast Iron Floor Box – Fully Adjustable

TECHNICAL SPECIFICATIONS| | |
---|---|---|---

Conduit Openings

| Cubic Inch Capacity| Adjustment Before Pour| Adjustment After Pour
(4) 1″ (25mm)| 48| 1 3/4″ (44mm)| 1/2″ (12.7mm)

Country of Origin: USA

880CS2-NA North America Made Two-Gang Cast Iron Floor Box – Fully Adjustable

TECHNICAL SPECIFICATIONS| | |
---|---|---|---

Conduit Openings

| Cubic Inch Capacity| Adjustment Before Pour| Adjustment After Pour
(6) 1″ (25mm)| 94 (45/49)| 1 3/4″ (44mm)| 1/2″ (12.7mm)

Country of Origin: USA

880CS3-NA North America Made Three-Gang Cast Iron Floor Box – Fully Adjustable

TECHNICAL SPECIFICATIONS| | |
---|---|---|---

Conduit Openings

| Cubic Inch Capacity| Adjustment Before Pour| Adjustment After Pour
(8) 1″ (25mm)| 160 (53/54/53)| 1 3/4″ (44mm)| 1/2″ (12.7mm)

Country of Origin: USA

OmniBox Series Shallow Cast Iron Floor Boxes Ordering Information

880CM1-1 One- Gang Shallow Cast Iron Floor Box – Fully Adjustable.

TECHNICAL SPECIFICATIONS| | |
---|---|---|---

Conduit Openings

| Cubic Inch Capacity| Adjustment Before Pour| Adjustment After Pour
(4) 1″ (25mm),| 34| 1 3/4″ (44mm)| 1/2″ (12.7mm)

Country of Origin: USA

880CM2-1 Two- Gang Shallow Cast Iron Floor Box – Fully Adjustable.

TECHNICAL SPECIFICATIONS| | |
---|---|---|---

Conduit Openings

| Cubic Inch Capacity| Adjustment Before Pour| Adjustment After Pour
(6) 1″ (25mm),| 76

36/40

| 1 3/4″ (44mm)| 1/2″ (12.7mm)

Country of Origin: USA

880CM3-1 Three-Gang Shallow Cast Iron Floor Box – Fully Adjustable.

TECHNICAL SPECIFICATIONS| | |
---|---|---|---

Conduit Openings

| Cubic Inch Capacity| Adjustment Before Pour| Adjustment After Pour
(8) 1″ (25mm),| 118

39/40/39

| 1 3/4″ (44mm)| 1/2″ (12.7mm)

Country of Origin: USASingle-gang stamped steel and triple-gang cast iron models of OmniBox Series Floor Boxes.

OmniBox Series Floor Boxes Solid Brass Cover Plate Flanges Ordering

Information

817B One-Gang Brass Combination Carpet & Tile Flange – Accepts Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts, sold separately.
Country of Origin: China

827B

Two-Gang Brass Combination Carpet and Tile Flange – Accepts Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts, sold separately.
Country of Origin: China

837B

Three-Gang Brass Combination Carpet and Tile Flange – Accepts Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts, sold separately.
Country of Origin: China

817C

One-Gang Brass Carpet Flange – For use on 880S1, 880M1, 880CS1-1, and 880CM1-1 Floor Boxes.
Country of Origin: China

827C

Two-Gang Brass Carpet Flange – For use on 880S2, 880M2, 880CS2-1, and 880CM2-1 Floor Boxes.
Country of Origin: China

837C

Three-Gang Brass Carpet Flange – For use on 880S3, 880M3, 880CS32-1, and 880CM3-1 Floor Boxes.
Country of Origin: China

817T

One-Gang Brass Tile Flange – For use on 880S1, 880M1, 880CS1-1, and 880M1-1 Floor Boxes.
Country of Origin: China

827T

Two-Gang Brass Tile Flange – For use on 880S2, 880M2, 880CS2-1, and 880CM2-1 Floor Boxes.
Country of Origin: China

837T

Three- Gang Brass Tile Flange – For use on 880S3, 880M3, 880CS3-1, and 880CM3-1 Floor Boxes.
Country of Origin: China

NOTE: UL Listed for tile, terrazzo, and carpet floors.

Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Cover Plates for OmniBox Series Floor Boxes provide access to a wide range of connectivity and are available in both metal and nonmetallic fabrications.

OmniBox Series Floor Boxes Metal Cover Plates Ordering Information

828R

Brass Duplex Cover Plate – Flip lids. Can also be used with a 106 type communication adapter.
Country of Origin: China

828GFITC

Brass GFI Cover Plate – May be used with Activate and Ortronics® Connectivity Systems in conjunction with 817B, 827B, and 837B Flanges.
Country of Origin: China

828DPGFITC

Brass Rectangular Cover Plate – Allows for mounting of a duplex style receptacle with a rectangular style flip lid cover.
Country of Origin: China

828COMTC

Brass Communication Cover Plate – Allows for up to four communication devices to be mounted in a recessed position within the 880 Floor Box. The 828COM Cover Plate has removable slides for cable egress.
Country of Origin: China
NOTE: For use with 880S and 880CS Series Boxes only.

828DLR

Brass Single Locking Receptacle Cover Plate – Single flip lid cover for 20A or 30A single locking receptacles. Device opening is
2 5/8″ (67mm). For use with maximum female locking device of 1.58″ diameter, and maximum male plug face of 2.25″ diameter.
Country of Origin: China

828SPTC

Brass Duplex Cover Plate – Screw plugs. Screw plugs are 1 1/2″ (38mm) in diameter.
Country of Origin: China

829STC

Brass Communication Cover Plate – Data slides. Feed through only, not for use with a mounting plate for communication jacks.
Country of Origin: China

829CK

Brass Communication Cover Plate – 2 5/8″ and 2 1/4″ (67mm and 57mm) plugs.
Country of Origin: China

829CK-1

Brass Communication Cover Plate – 2 5/8″ and 1″ (67mm and 25mm) plugs.
Country of Origin: China

829CK-3/4

Brass Communication Cover Plate – 2 5/8″ and 3/4″ (67mm and 19.1mm) plugs.
Country of Origin: China

829CK-1/2

Brass Communication Cover Plate – 2 5/8″ and 1/2″ (67mm and 12.7mm) plugs.
Country of Origin: China

828MAAP

A/V Adapter Plate – Sheet metal adapter plate that accepts two (2) Legrand AVIP devices or two (2) Extron® Electronics MAAP style device plates (sold separately). For use with 828GFITC or 828GFITCAL cover plates. (Sold separately)
Country of Origin: USA

NOTE: UL Listed for tile, terrazzo, and carpet floors.

Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges.

OmniBox Series Floor Boxes Brushed Aluminum Cover Plates Ordering

Information

818TCAL

One-Gang Brushed Aluminum Combination Carpet and Tile Flange – Accepts Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts, sold separately.
Country of Origin: China
NOTE: Brushed aluminum flanges come with beveled edges.

828TCAL

Two-Gang Brushed Aluminum Combination Carpet and Tile Flange – Accepts Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts, sold separately.
Country of Origin: China
NOTE: Brushed aluminum flanges come with beveled edges.

838TCAL

Three- Gang Brushed Aluminum Combination Carpet and Tile Flange – Accepts Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts, sold separately.
Country of Origin: China
NOTE: Brushed aluminum flanges come with beveled edges.

818TAL

One-Gang Brushed Aluminum Tile Flange – For use on 880S1, 880M1, 880CS1-1, and 880M1-1 Floor Boxes.
Country of Origin: China
NOTE: Brushed aluminum flanges come with beveled edges.

828TAL

Two-Gang Brushed Aluminum Tile Flange – For use on 880S2, 880M2, 880CS2-1, and 880CM2-1 Floor Boxes.
Country of Origin: China
NOTE: Brushed aluminum flanges come with beveled edges.

838TAL-880S3
838TAL-880M3
838TAL-880M3
838TAL-880CS3
838TAL-880CM3

Kit – The 838TAL-880 Series flanges provide additional load support for 3-gang tile flanges. Kit includes 838TAL Flange and two support dividers.
Country of Origin: USA
NOTE: Order kit for specific box type: 880S3, 880M3, 880CS3, or 880CM3.

NOTE: UL Listed for tile, terrazzo, and carpet floors.
Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges.

OmniBox Series Floor Boxes Metal Cover Plates Ordering Information

828R-TCAL

Brushed Aluminum Duplex Cover Plate – Flip lids. Can also be used with a 106 type communication adapter.
Country of Origin: China

828GFITCAL

Brushed Aluminum GFI Cover Plate – May be used with Activate and Ortronics® Connectivity Systems in conjunction with 817B, 827B, and 837B Flanges.
Country of Origin: China

828DPGFITCAL

Brushed Aluminum Rectangular Cover Plate – Allows for mounting of a duplex style receptacle with a rectangular style flip lid cover.
Country of Origin: China

828COMTCAL

Brushed Aluminum Communication Cover Plate – Allows for up to four communication devices to be mounted in a recessed position within the 880 Floor Box. The 828COMTCAL Cover Plate has removable slides for cable egress. Country of Origin: China
NOTE: For use with 880S and 880CS Series Boxes only.

828DLRAL

Brushed Aluminum Single Locking Receptacle Cover Plate – Single flip lid cover for 20A or 30A single locking receptacles. Device opening is 2 5/8″ (67mm). For use with maximum female locking device of 1.58″ diameter, and maximum male plug face of 2.25″ diameter.
Country of Origin: China

830CKTCAL

Brushed Aluminum Cover Plate – Power or communication plate with 2″ (51mm) and 1 1/4″ (32mm) plugs.
Country of Origin: China
NOTE: Acceptable for use with threaded conduit when passing through power cables.

830CKTCAL-1

Brushed Aluminum Cover Plate – Power or communication plate with 2″ (51mm) and 1″
(25mm) plugs.
Country of Origin: China
NOTE: Acceptable for use with threaded conduit when passing through power cables.

830CKTCAL-3/4

Brushed Aluminum Cover Plate – Power or communication plate with 2″ (51mm) and 3/4″ (19.1mm) plugs.
Country of Origin: China
NOTE: Acceptable for use with threaded conduit when passing through power cables.

830CKTCAL-1/2

Brushed Aluminum Cover Plate – Power or communication plate with 2″ (51mm) and 1/2″ (12.7mm) plugs.
Country of Origin: China
NOTE: Acceptable for use with threaded conduit when passing through power cables.

828MAAP

NOTE: UL Listed for tile, terrazzo, and carpet floors. Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges.

OmniBox Series Floor Boxes Powder-Coated Aluminum Cover Plate Flanges

Ordering Information

817TCAL-BK
817TCAL-GY
817TCAL-BS
817TCAL-NK
817TCAL-BZ

One-Gang Powder-Coated Aluminum Combination Carpet and Tile Flange – Accepts Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts, sold separately. Flanges are available in five decorative colors: black, gray brass,nickel and bronze.
Country of Origin: China

827TCAL-BK
827TCAL-GY
827TCAL-BS
827TCAL-NK
827TCAL-BZ

Two-Gang Powder-Coated Aluminum Combination Carpet and Tile Flange – Accepts Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts, sold separately. Flanges are available in five decorative colors: black, gray brass,nickel and bronze.
Country of Origin: China

837TCAL-BK
837TCAL-GY
837TCAL-BS
837TCAL-NK
837TCAL-BZ

Three-Gang Powder-Coated Aluminum Combination Carpet and Tile Flange – Accepts Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts, sold separately. Flanges are available in five decorative colors: black, gray brass,nickel and bronze.
Country of Origin: China

817TAL-BK
817TAL-GY
817TAL-BS
817TAL-NK
817TAL-BZ

One-Gang Powder-Coated Aluminum Tile Flange – For use on 880S1, 880M1, 880CS1-1, and 880M1-1 Floor Boxes. Flanges are available in five decorative colors: black, gray brass,nickel
and bronze.
Country of Origin: China

827TAL-BK
827TAL-GY
827TAL-BS
827TAL-NK
827TAL-BZ

Two-Gang Powder-Coated Aluminum Tile Flange – For use on 880S2, 880M2, 880CS2-1, and 880CM2-1 Floor Boxes. Flanges are available in five decorative colors: black, gray brass,nickel and bronze.
Country of Origin: China

828R-TCALBK
828R-TCALGY
828R-TCALBS
828R-TCALNK
828R-TCALBZ

Powder-Coated Aluminum Duplex Cover Plate – Flip lids. Can also be used with a 106 type communication adapter.
Country of Origin: China

828GFITCAL-BK
828GFITCAL-GY
828GFITCAL-BS
828GFITCAL-NK
828GFITCAL-BZ

Powder-Coated Aluminum Rectangular Cover Plate – Allows for mounting a duplex receptacle (Decorator or GFCI style) with a rectangular flip cover
Country of Origin: China

829CKAL-1BK
829CKAL-1GY
829CKAL-1BS
829CKAL-1NK
829CKAL-1BZ

Powder-Coated Aluminum Cover Plate – Power or communication plate with 2″ (51mm) and 1″ (25mm) plugs. Covers are available in five decorative colors: black, gray brass,nickel and bronze.
Country of Origin: China
NOTE: Acceptable for use with

OmniBox Series Floor Boxes Powder-Coated Aluminum Cover Plate Flanges

Ordering Information

829CKAL-3/4BK
829CKAL-3/4GY
829CKAL-3/4BS
829CKAL-3/4NK
829CKAL-3/4BZ

Powder-Coated Aluminum Cover Plate – Power or communication plate with 2″ (51mm) and 3/4″ (19.1mm) plugs. Covers are available in five decorative colors: black, gray brass,nickel and bronze.
Country of Origin: China
NOTE: Acceptable for use with threaded conduit when passing through power cables.

828MAAP

A/V Adapter Plate – Sheet metal adapter plate that accepts two (2) Extron® Electronics MAAP style device plates (sold separately). For use with 828GFITC or 828GFITCAL cover plates. (Sold separately)
Country of Origin: China

NOTE: UL Listed for tile, terrazzo, and carpet floors.
Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges.

OmniBox Series Floor Boxes Nonmetallic Cover Plate Flanges Ordering

Information

817PCC-BLK
817PCC-BRN

One-Gang Nonmetallic Carpet Flange – Available in black or brown. For Ortronics® connectivity use with 829PFLRT Cover. For Activate connectivity use with 829PFL Cover. Accepts Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts, sold separately.
Country of Origin: Mexico

827PCC-BLK
827PCC-BRN

Two-Gang Nonmetallic Carpet Flange – Available in black or brown. For Ortronics® connectivity use with 829PFLRT Cover. For Activate connectivity use with 829PFL Cover. Accepts Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts, sold separately.
Country of Origin: Mexico

837PCC-BLK
837PCC-BRN

Three-Gang Nonmetallic Carpet Flange – Available in black or brown. For Ortronics® connectivity use with 829PFLRT Cover. For Activate connectivity use with 829PFL Cover. Accepts Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts, sold separately.
Country of Origin: Mexico

OmniBox Series Floor Boxes Nonmetallic Cover Plates Ordering Information

828PR-BLK
828PR-BRN

Nonmetallic Duplex Cover Plate – Flip lids. Available in black or brown. Can also be used with a 106 type communication adapter.
Country of Origin: USA

828PRGFI-BLK
828PRGFI-BRN

Nonmetallic GFI Cover Plate – Available in black or brown.
May be used with Ortronics® Connectivity systems in conjunction with 817, 827 and 837PCC Series flanges.
Country of Origin: USA

829PFL-BLK
829PFL-BRN

Nonmetallic Communication Cover Plate – Individual flip lids.* Available in black or brown. Gasket included. Wiremold CM Series inserts included.
Country of Origin: USA

829PFLRT-BLK
829PFLRT-BRN

Nonmetallic Communication Cover Plate – Individual flip lids.* Available in black or brown. Gasket included. Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters included.
Country of Origin: USA

829PCK-BLK
829PCK-BRN

Nonmetallic Communication Cover Plate – Breakouts. Available in black or brown. Feed through only, not for use with a mounting plate for communication jacks.
Country of Origin: USA

829PCK-BLK
829PCK-BRN

Nonmetallic Communication Cover Plate – Data slides. Available in black or brown. Feed through only, not for use with a mounting plate for communication jacks.
Country of Origin: USA

Replacement flip lids can be ordered under Cat. No. PFL-BLK and PFL-BRN. Each Cat. No. comes with three flip lids.
The above cover plates are listed for tile, terrazzo, and carpet floors.
NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges.
Nonmetallic covers are interchangeable with aluminum flanges.

NOTE: All brand and product names referenced in this document are registered trademarks or trademarks of their respective holders.

NOTE: The paper used to print this document is an environmentally responsible paper with 10% post consumer waste, with FSC and SFI Chain of Custody certifications, Lacey Act complaint. 100% of the electricity used to manufacture Flo sheets is generated with Green-e certified renewable energy.

Legrand, North America
60 Woodlawn Street
West Hartford, CT 06110
1.877.BY.LEGRAND (295.3472)
www.legrand.us
Canada
905.738.9195
www.legrand.ca
For latest specs visit www.legrand.us/wiremold

References

• Legrand CA | Delivering and Managing Power, Light, and Data
• Legrand US | Delivering and Managing Power, Light, and Data
• Resources
• Wiremold Wire and Cable Management Products from Legrand

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>