REXTON M-Core R-Li Hearing Aid User Guide

REXTON M-Core R-Li Hearing Aid

REXTON M-Core R-Li Hearing Aid

This is not a substitution for reading your Owner’s Manual.
For more in-depth instructions, please refer to your Owner’s Manual.

www.rexton.com

Check the charging status of your hearing aid

Turn your hearing aids on

• Your hearing aids turn on automatically when removed from the charger
• They are programmed to have a start-up delay to allow you to insert without whistling
•  You will hear a melody during the start-up

| 6 Second| | 18 Second| | 12 Second
---|---|---|---|---|---

Insert your hearing aids

• Grasp receiver/dome between your thumb and forefinger
  – Insert dome into your ear canal
  – Gently work the dome into proper position by slightly adjusting it until it is firmly seated in your ear

• Lift the hearing aid over the top of your ear
  − Adjust it to fit behind your ear
  − Press slightly for a secure and comfortable fit
  − Place retention strand into the bottom “bowl” of your ear (if applicable)

Using your hearing aids

• Your hearing aids feature Wireless Sync, which automatically adjusts both hearings aids simultaneously to reflect changes in your  hearing environment
• The rocker switch to control on your hearing aids may be programmed to give you personal control of your hearing aids
• The functions for short and medium press will change both hearing aids simultaneously

L    R

|      L    R|

   L    R

Volume Up/Down

| | |

–

Program Up/Down| | |

–

TV Stream| | |

–

Power On/Off|

–

|

–

|

*Press and hold until hearing aid turns on/off

Your hearing aids may be programmed to alert you when you are making changes to your hearing aids or when your battery needs replacing.

Signal tones

 |

L     R

Program Change|
Volume Change|
Volume Limit|
Volume On Position|
Low Battery|
Bluetooth On/Off|
Power On/Off|

Troubleshooting

Problem & possible solutions

Sound is weak:
Increase the volume
Recharge the hearing aid
Clean or exchange the click dome or wax protector
Hearing aid emits whistling sounds:
Reinsert the receiver until it fits securely
Decrease the volume
Clean or exchange the click dome or wax protector
Sound is distorted:
Decrease the volume
Recharge the hearing aid
Clean or exchange the click dome or wax protector
Hearing instrument emits spontaneous signal tones:
Recharge the hearing aid
Hearing aid does not work:
Turn the hearing aid on
Recharge the hearing aid
Power-on-delay is active. Wait several seconds and check again
Clean or exchange the click dome or wax protector

Consult your Hearing Care Professional if you have further problems
© Rexton, a Division of WSAUD A/S. All rights reserved. 10980917 6/20 2.0 V11011083 SIV-7465

DOWNLOAD RESOURCES

• REXTON M-Core R-Li Hearing Aid [pdf] User Guide M-Core R-Li Hearing Aid
• Read more: https://manuals.plus/rexton/m-core-r-li-hearing-aid-manual#ixzz7dmB9fhEj

FAQ’S

How long does a lithium battery last in a hearing aid?

If your rechargeable hearing aid doesn’t have a battery door, it contains a Lithium-Ion rechargeable battery. These batteries take about 3-4 hours to fully charge and will power your hearing aids for about 24 hours per charge. The battery itself should last for the entire life of the hearing aid, typically 4-5 years.

How do you turn up the volume on a Rexton hearing aid?

The first one is a volume. Control. You can change volume from right and left ear separately or tap this icon to put them together as one slider drag the slider up to increase volume.

What is the button on my hearing aid for?

The button allows you to change to way the hearing aid operates for using in different situations, for example using in noisy situations or where there is a loop system. On most aids, moving the volume control downwards will reduce the volume.

How do I connect my Rexton hearing aid to my TV?

Connect transmitter to power cord and plug into power supply. Both lights on front of the transmitter should blink blue. Start TV streaming Switch your hearing aids to the television program via app, hearing aid rocker switch, Smart Mic, or Smart Key.

How do I connect my Bluetooth hearing aid to my phone?

Pairing your hearing aid with an Android device
Locate, then tap the Settings icon on your device. Select Bluetooth. In this screen, if Bluetooth appears Off, change the settings to On. Then, turn your hearing aids off and then back on (this puts your hearing aids into pairing mode).

Should I turn my hearing aid off at night?

Hearing aids should be worn during waking hours. When going to bed for the night, you should remove your hearing aids and open the battery door, if you have one, to help conserve battery life.

Can you shower with a behind the ear hearing aid?

Your hearing aids are water-resistant, which means they are designed to be worn in all daily life situations. So you don’t have to worry about sweat or getting wet in the rain. However, do not wear your hearing aids while showering or participating in water activities.

My Hearing Aids Are Too Quiet?

If your hearing aids are working but the sound seems to be muffled or too soft, there is likely a buildup of wax on the microphone or earmold. Try thoroughly cleaning your hearing aid.

How do you answer the phone with a hearing aid?

The easiest way to ensure calls are routed through your hearing aids is to answer phone calls using the multi-function button of the hearing aid. For outgoing calls, initiate the call normally. Depending on your phone configuration, the call will be routed to the hearing aids automatically.

How often should hearing aid filters be changed?

In most cases, you need to replace it once a month or if your hearing aid doesn’t sound as loud or is distorted.

Why won’t my hearing aid stay in my ear?

Moisture in your ear canal can cause the device to move around. The hearing aid also may change position from jaw movement when you talk or chew. If you use a dome on your hearing aid, try adjusting to a smaller or larger size. A retention wire may also need to be added by your audiologist.

How do I clean the wax out of my hearing aid?

The wax loop or brush from a cleaning kit are the best tools to gently scoop any wax away from the opening of the sound tip. Behind the ear hearing aids come with tubes that can also become blocked with earwax. Remove it, check for any blockages, and remove them with either a small, bendable wire or an air blower.

VIDEO

REXTON M-Core R-Li Hearing Aid
www://rexton.com/

References

• Hearing aids you can rely on. Since 1955. | Rexton

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>