JBL DSi 2.0 Series Amplifiers for Cinema Loudspeakers User Guide
- June 7, 2024
- JBL
Table of Contents
DSi 2.0 Series
Next-Generation Amplifiers for JBL Cinema Loudspeakers
HIGHLIGHTS
Best-in-Class DSP
96kHz/32-bit floating-point internal processing with all the processing needed
to optimize cinema loudspeakers
Superior Power Density
Crown’s patented DriveCore technology delivers greater power density than
traditional designs
Built-in JBL Speaker Tunings
Speaker tuning presets for the entire JBL cinema speaker range
Remote Monitoring and Management
SNMP connectivity for interfacing with third-party Theater Management Systems
(TMS) and cinema control (NOC) systems
Audio Networking (SA4-D, MA4-D and LA4-D Models)
Dante®/AES67 support for direct digital connection with Dolby Atmos® Connect
interfaces
The DSi 2.0 amplifier family, JBL’s first line of dedicated cinema amplifiers, builds on Crown DSi Digital Screen Array amplifier technology and best-in- class DSP from Crown’s flagship CDi DriveCore Series to deliver potent, efficient amplification and top-notch processing for JBL’s entire range of cinema loudspeakers. Cinema managers and integrators looking to maximize their power investment and future-proof their systems can count on JBL DSi 2.0 Series to deliver robust, reliable performance in an ultra-efficient package.
KEY MESSAGES
BEST-IN-CLASS DSP
DSi 2.0 amplifiers feature best-in-class, 96kHz/32-bit floating point internal
processing with delay (up to 1,000 ms), 8-band parametric EQ, crossover, FIR
processing, Level MAX™ limiting and more, eliminating the need for an external
processor.
SUPERIOR POWER DENSITY MEANS BETTER VALUE
Crown’s patented DriveCore technology seamlessly integrates the amplifier
drive stage into the power output stage, fusing everything into one powerful
chip to deliver greater efficiency, reliability and performance. Using
DriveCore, DSi 2.0 amps deliver greater power density than traditional
designs, offering 4 channels of amplification with bridgeable outputs in a
single 2U footprint. Using high-output 2Ω mode allows powering of up to 4
surround speakers from a single channel.
DEDICATED JBL SPEAKER TUNINGS
Built-in JBL cinema speaker tuning presets manage voltage and frequencies
delivered to transducers, maximizing system efficiency and optimizing audio
signal quality while preventing equipment damage and accelerating deployment.
REMOTE MONITORING AND MANAGEMENT
SNMP connectivity for interfacing with third-party theater management systems
and Cinema Control (NOC) systems for remote status and fault monitoring. A
HiQnet port provides access to HARMAN’s Audio Architect software, for
controlling, configuring and monitoring amplifier operation through a standard
TCP/IP network. A combined GPIO/AUX port can be used to externally recall
presets, mute channels, monitor amplifier health and power the amplifier on
and off.
AUDIO NETWORKING (SA4-D, MA4-D AND LA4-D MODELS)
AES67 connectivity allows networked audio distribution from any
Dante/AES67-compatible device and direct interfacing with Dolby Atmos Connect
interfaces.* Dual network audio ports support primary and secondary networks
configured as switched (daisy chain) or redundant (star) systems.
*Available via a firmware update.
IN THE BOX
DSi 2.0 Amplifier
IEC Power Cable
Quick Start Guide
APPLICATIONS
PROFESSIONAL CINEMA ROOMS
Standard 5.1, 7.1 or immersive Atmos audio cinema playback systems in medium
to large professional cinema rooms.
FEATURES
- Three power ratings available: SA4/SA4-D: 350W (8Ω), MA4/MA4-D: 700W (8Ω), LA4/LA4-D: 1,200W (8Ω)
- 96kHz/32-bit floating-point processing with FIR filtering, Level MAX™ limiting, 8-channel parametric EQ, delay and more, eliminating the need for an external speaker processor
- SA4-D, MA4-D and LA4-D models includes Dante/AES67 support for seamless integration with Dolby Atmos Connect and other interfaces
- Crown DriveCore technology replaces hundreds of amplifier parts with a single chip, for superior efficiency and reliability
- Four channels with bridgeable outputs to easily power JBL’s entire range of cinema speakers
- New amplifier design allows for high power output at 2Ω, enabling up to 4 surround speakers to be powered by a single channel
- Built-in JBL cinema speaker tuning presets match all JBL cinema loudspeakers for optimal performance, loudspeaker protection and accelerated deployment
- SNMP to interface with third-party Theater Management Systems (TMS) and cinema control (NOC) systems
- HiQnet port to interface with HARMAN Audio Architect control software over a standard TCP/IP network
- Externally recall presets, mute channels, monitor amplifier health and power on and off through a combined GPIO/AUX port
- Intuitive front-panel LCD and encoder to configure amplifier settings and mute channels at the push of a button
- Ultra-quiet operation: 51dBA maximum fan noise
- Standard 19-inch (482 mm) 2U chassis
- International power supply
Analog Model Back Panel
Dante/AES67 Model Back Panel
ORDER SPECIFICATIONS
| SA4| SA4-D| MA4| MA4-D| LA4| LA4-D
---|---|---|---|---|---|---
SHIPPING CARTON (L x W x H):|
TBD
SHIPPING WEIGHT:| 52.03 lb (23.6 kg)| 54.23 lb (24.6 kg)| 52.03 lb (23.6
kg)| 54.23 lb (24.6 kg)| 52.03 lb (23.6 kg)| 54.23 lb (24.6 kg)
UPC CODE:| TBD| TBD| TBD| TBD| TBD| TBD
TECHNICAL SPECIFICATIONS
| **** | SA4 | SA4-D | MA4 | MA4-D | LA4 | LA4-D |
|---|
USER INTERFACE
FRONT-PANEL INTERFACE:| Mute and configuration with encoder
FRONT-PANEL DISPLAY:| LCD display and signal LED’s (input/output)
CHANNELS:|
4
CONNECTORS
ANALOG AUDIO INPUT:|
Block connector
DIGITAL AUDIO INPUT (DANTE/AES67):| N/A| 2x RJ-45| N/A| 2x RJ-45| N/A| 2x
RJ-45
SPEAKER OUTPUT:| Barrier terminal block, accommodates 10AWG wire
NETWORK/MONITORING/CONTROL:|
RJ-45
GPIO/AUX:|
2in/2out block connector
POWER:|
Standard IEC
POWER (1kHz, 20MS BURST, 2 CHANNELS DRIVEN, 0.5% THD MAX)
RATED POWER (8Ω):| 350W x 4| 750W x 4| 1,300W x 4
RATED POWER (4Ω):| 700W x 4| 1,400W x 4| 2,200W x 4
RATED POWER (2Ω):| 1,050W x 4| 2,100W x 4| 1,200W x 4
RATED POWER (8Ω BRIDGED):| 1,300W x 2| 2,600W x 2| 4,000W x 2
RATED POWER (4Ω BRIDGED):| 2,200W x 2| 4,200W x 2| 2,300W x 2
PERFORMANCE
DIGITAL SIGNAL PROCESSING:| 96kHz, 32-bit floating point
VOLTAGE GAIN (AT 4,10,16dBu SENSITIVITY; 4/8Ω):| 32.5/26.5/20.5dB|
35.5/29.5/23.5dB| 38/32/26dB
FREQUENCY RESPONSE (4Ω, 20Hz – 20kHz):|
±0.5dB
TOTAL HARMONIC DISTORTION (AT FULL RATED POWER, FROM 20Hz – 20kHz):|
0.35%
ANALOG INPUT SIGNAL TO NOISE RATIO (REF. RATED POWER, ‘A’-WTD.):| >106dB|
105dB| >104dB
ANALOG INPUT SIGNAL TO NOISE RATIO (REF. RATED POWER, 20Hz – 20kHz):| >100dB| 99dB| >98dB
INTERMODULATION DISTORTION (60Hz AND 7kHz AT 4:1, FROM – 30dB TO FULL RATED POWER):|
≤0.35%
DAMPING FACTOR (20Hz TO 100Hz):|
1000
CROSSTALK (BELOW RATED POWER, 20HZ – 1kHZ):|
80dB
COMMON MODE REJECTION (20Hz – 1kHz, TYPICAL):|
70dB
DC OUTPUT OFFSET (WITH INPUTS SHORTED):|
±10mV
INPUT IMPEDANCE (NOMINALLY BALANCED, NOMINALLY UNBALANCED):|
70 kΩ balanced, 35 kΩ unblanced
MAXIMUM INPUT LEVEL (LOW AMP GAIN MODE):|
+21dBU
LOAD IMPEDANCE STEREO/DUAL MODE:|
2Ω –16Ω
LOAD IMPEDANCE BRIDGE MONO:|
4Ω – 16Ω
MAXIMUM FAN NOISE (REF. dB SPL @ 1M) :|
51dBA
ELECTRICAL
POWER SUPPLY:|
100 – 220V ±10%, 50/60Hz
SLEEP:|
GPIO/AUX connector
PHYSICAL
DIMENSIONS (D x W x H):| 17.21 x 18.98 x 3.46 in (437.2 x 482 x 88 mm)
NET WEIGHT:|
23.15 lb (10.5 kg)
HARMAN Professional 8500 Balboa Blvd. Northridge, CA 91329 USA
© 2020 HARMAN International Industries, Incorporated. All rights reserved.
Features, specifications and appearance are subject to change without notice.
Issued: 1/2020
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>