GATOR GHUDGPS GPS Car Speed Head-Up Display User Manual
- June 7, 2024
- GATOR
Table of Contents
GATOR GHUDGPS GPS Car Speed Head-Up
Display
Note: This manual is considered correct at time of printing but is subject to change. For latest manuals and updates refer to the website.
Introduction
Thank you for purchasing the Gator GHUDGPS Head-Up display. Please ensure that you have read the product manual and instructions in full, prior to installation and use. Failure to do so may result in product failure/damage or incorrect operation and therefore impact the product performance.
Product overview
When driving at a high speed, especially at night, the driver may look down at the instrument panel, which may cause accidents. To prevent this situation from occurring, some high-end vehicles are equipped with a head up display (HUD) system, which can project important information (e.g. vehicle speed) onto a transparent film that needs to be affixed to your windshield at the eye level of the driver. The displays brightness is automatically adjusted, making it easier for the driver to keep their eyes on the road. This can help the driver avoid breaking laws for speeding and it can enable the driver to read the data instantly without shifting his or her view, which is of vital value in reducing traffic accidents caused by taking your eyes of the road.
Product features
- GPS Heap-Up display
- Multi-color screen 3.5 inch HD display
- Nano-technology for clearer vision
- Driving speed display
- Projects information onto transparent film affixed to your windshield
- Adjustable speed display in KM/H or MPH
- Speed warning function
- Speed deviation setting
- Compass setting display
- Auto power ON/OFF
- Automatic and manual brightness adjustment mode
- 12/24V DC car adaptor
- 2.5M USB/Mini charge cable
- Dimensions 90x54x12mm
Package components
Product Structure
- Compass driving directions: N (North), S (South), E (East), W (West)
- Speed Unit – KM/H – Kilometers per hour, MP/H – Miles per hour
- Speed indication
- Satellite signal icon: Light changes from red to green when successfully connected to satellite signal.
- Light sensor – Brightness will auto adjust according to outside brightness
- Buzzer sound on/off (buzzer sound is on if the icon is lit up)
- Speed icons: Shows menu level & speed alarm visual display
- Settings button – Three way wave button, inward, Left or Right
- Left direction = Increase parameter
- Inward direction = OK/toggle button
- Right direction = Decrease parameter
- Power ON/Off
- USB cable interface.
Installation of HUD
Placing Sticky Non-Slip mat and reflective film
- Place the provided sticky non-slip mat on the vehicles dash as a base for the HUD. Being easy to remove, its location can also be changed at any time. Position the HUD in the preferred position before applying reflector film.
- The reflecting film should be placed on the windscreen above the HUD to reflect the HUD display towards the driver’s eye level when in the driver’s seat.
Procedure of pasting the reflective film
- Lightly spray some water on the windscreen glass position where the film will be placed
- Take off the protective layer (marked 1 BACK) from the reflective film, then place the reflective film onto the winddscreen glass.
- Once position is ideal, you can use a plastic edged squeegee or something else flat to remove excess water from the reflective film, until there are no bubbles or water remaining.
- After a few minutes, the moisture inside the film should evaporate.
- Remove the protective layer (marked 2 FRONT) from the reflective film once it is in the final position.
**Wave Button Function:
**
Enter & change menu settings:
Inward long press on the wave button for 5 seconds to enter into the menu settings, inward short press on the wave button to toggle through the menu settings. The speed icons will illuminate on the display for each menu. There are 7 in total. Pull wave button to left or right to increase/decrease parameter value. After adjustment, inward long press for 5 seconds to save and exit.
Reset setting:
Inward long press for 5 seconds to enter into menu setting, short press inward to toggle to access menu 7, pull L/R to select parameter 1, after adjustment, inward long press for 5 seconds to save and exit.
Turn on and off the buzzer (Sounds):
Pull right on the wave button for 5 seconds to turn off the buzzer (Sounds),
repeat process to turn the buzzer on.
HUD settings:
The HUD displays data received from GPS satellites. GPS data may differ from
the vehicles actual dashboard data. You can enter into the menu settings of
the HUD and make fine adjustments in order to match the vehicles dashboard
data.
Menu| Parameters| Range Adjustment| Explanation|
Default Value|
---|---|---|---|---|---
1| Speed compensation allows user to adjust speed to match the cars speedo|
50-150| Speed error: Pull L or R on the wave button to adjustment (speed icon
is 1)| 107|
2| First speed alarm| 10-180| Speed alarm when it reaches 60KM/H. Pull L or R on the wave button to adjust the alarm values (speed icon is 2)| 60|
Menu| Parameters| Range Adjustment| Explanation
| Default Value|
---|---|---|---|---|---
3
|
Second speed alarm
|
10-180
|
Speed alarm when it reaches 80 KM/H. Pull L or R on the wave button to adjust the alarm values (speed icon is 3)
|
80
|
4| Brightness adjustment| 0-2| Pull L or R on the wave button to adjust the automatic brightness. is default 1 is darke 2 is brightestst, (speed icon is 4)
| 0|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
5| Speed| 0-1| Pull L or R| 0|
| unit| | on the wave|
| change| | button to|
| from| | adjust.|
| KM / H| | 0 for KM / H|
| to MPH| | 1 for MPH (speed icon is 5)|
| | | |
Menu| Parameters| Range Adjustmen| Explanation
t
| Default Value| Display State
---|---|---|---|---|---
6
|
Start reference voltage
|
10-150
|
If HUD cannot power off automatically, change it to
|
0
|
| | | 132. 132|
| | | means 13.2V,|
| | | and if HUD|
| | | turns off when|
| | | driving,|
| | | change it to|
| | | 128. 128|
| | | means 12.8 V|
| | | (speed icon|
| | | is 6)|
7| Reset Settings| 0-1| Pull L or R button to| 0|
| | | select|
| | | parameter 1|
| | | then inward|
| | | press in 5|
| | | seconds to|
| | | save setting.|
| | | (speed icon|
| | | is 7)|
Product specifications
HUD weight | 40g |
---|---|
Dimensions | 90x54x12mm |
Satellite positioning time | Cold start: 30s, hot start: 1s |
Speed range | 0-400KM |
Compass precision | ±1° |
Built-in Speaker | Alerts |
USB Interface | Mini USB |
Power source | 12/24V Car adaptor |
USB cable | 2.5 Metres |
Output | 1000 mA |
Light sensor | Auto-brightness adjustment |
Troubleshooting guide
Under normal operating conditions, if there are problems with the device,
please refer to the following methods to resolve.
HUD screen without any display, and no power?
Check the car charging adaptor and cable is placed firmly in the vehicles
charging socket. Check the cable is correctly inserted into the HUD. Try
removing and replacing the charging adaptor and cable. Check and make sure the
HUD switch is turned ON. If there still no display please try another car to
test and analyze whether the car cigarette lighter interface is faulty and not
supplying power.
HUD cannot connect to the satellite signal?
Make sure the HUD is clear of any interference, ie buildings, underground car
parks. Make sure you are out in an outdoor open environment.
Inaccurate Speed?
First : Check whether the satellite signal icon has changed from red to
green.
Second : Check whether the speed unit is correct, menu 5 can change the
speed unit.
Third : When HUD’s power is on, inward press the wave button 5 seconds to
enter into the menu 1,(here speed icon is 1), parameter shows 107, short press
L or R on the wave button to increase or decrease the value according to the
difference until it shows correct one. After adjustment, inward long press for
5 seconds to save setting.
Why is the HUD not turning on in the car?
Please check and make sure that there is power in the cigarette lighter socket
of your car. Try another vehicles cigarette lighter socket to compare.
Technical assistance
If you need assistance setting up or using your Gator product now or in the
future, call Gator Support.
Australia
TEL: 03 – 8587 8898
FAX: 03 – 8587 8866
Mon-Fri 9am – 5pm AEST
Please retain this user guide for future reference.
If you would like to download a digital copy of this manual, or other Gator
manuals/software, please visit the http://gatordriverassist.com
website and click on ‘Firmware & Manuals” for
information on where to find the manuals/software. This manual is considered
correct at time of printing but is subject to change. For latest manuals and
updates refer to the website.
Copyright © 2017 by TDJ Australia
All rights reserved. No part of this publication may be reproduced,
distributed, or transmitted in any form or by any means, including
photocopying, recording, copying or other electronic or mechanical methods,
without the prior written permission of the author.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>