GATOR GRV5HDW Driver Assist User Manual
- June 1, 2024
- GATOR
Table of Contents
GATOR GRV5HDW Driver Assist
GRV5HDW
USER MANUAL
USER MANUAL
For more information on the Gator range go to our website
INCLUSIONS
5″ Wireless Monitor, Mounting Bracket With Adhesive Pad, Monitor Sunvisor,
720P HD Wireless Camera, 1.7M 10-32V Monitor Power Adaptor,
1.5M Monitor Power Cable & 2.5M Camera Power Cable.
Installation diagram
Introduction
Before using this unit, please read this instruction manual carefully. Take special care to follow the warnings indicated on the unit itself as well as the safety suggestions listed. Keep this instruction for future reference.
WARNING:
The wireless monitor reversing system is designed to be used with, not instead
of other viewing aids in your vehicle. The manufacturer shall not be held
liable for any accidents which occurred while operating this system.
Working Voltage
- Monitor: voltage range 10V-32V
- Camera and Transmitter: 10V-32V<=600mA
Note： If the power is over 32V to camera, it will cause the damage.
Product information
- Monitor wireless antenna
- Screen
- Adjustable monitor angle mount
- Camera wireless antenna
- Guideline: On home screen quick press OK button
- 5. – Selection button
- Menu button: Pess to enter/exit the menu settings
- + Selection button
- OK button: On home screen can be pressed to turn guidelines ON/OFF
- Power button: Press for 1 second to turn on or off.
- Power light (Blue)
- Adjustable camera angle mount
- IR lights
- IR Sensor
- Camera lens
Menu operation
When the monitor is on, press the “MENU” button to enter into the menu
settings. Press the “+ / -“ buttons to increase or decrease the parameter
setting.
Press the “OK“ button to confirm setting.
Main menu
Language/Picture Flip / Backlight Brightness / Factory Default / System
Information / Camera Pair 
Language
Press the “OK” button to enter the language choice interface and press the “+
/ -“ buttons to select required language.
Picture Flip
Press the “OK” button to enter the picture flip interface and press the “+ /
-“ buttons to turn mirror and flip function on/off
Backlight Brightness
Press the “OK” button to enter the backlight brightness interface and press
the “+ / -“ buttons to adjust.
Factory Default
Press the “OK” button to enter the factory default settings and press the “+ /
-“ buttons to select yes or no to restore the monitor to default factory
settings.
System Information
Press the “OK” button to enter the system information setting to show pairing
camera and firmware information,
Camera Pair
Press the “OK” button enter to the camera pair settings. With the camera
powered a text window will appear on screen saying “searching” .
After a few seconds the camera name for pairing will appear. Press the “OK” button to confirm camera.
Once successfully
paired, a text window will appear saying “Pairing successful”, and the camera
will activate. 
Monitor specifications
- Display Device…………………………………………..Colorful IPS LCD
- Size…………………………………………………………………………..5 Inch
- Interface……………………………………………………………..Digital
- Resolution…………………………………………………..800 x 480 (RGB)
- Luminance (Nits)………………………………………………..350 cd/m2
- Contrast Ratio……………………………………………………………350:1
- Power Consumption……………………………………………………..5W
- Video frame………………………………………………………………30FPS
- Power Supply……………………………………………………..10-32VDC
- View Angle (LR/UD)…………….L 90, R 90, U 90, D 90 (Degree’s)
- Wireless Frequency………………………………… 2400 ~ 2483.5MHz
- (2.4G hz frequency hopping technology Chipset Solution)
- Operating Temperature……………………………….-20˚C to +70˚C
- Weight……………………………………………………………………….280g
- Dimensions………………………………..L 153.2 x W 48.2 x H 109mm
Camera specifications
- Type…………………………………………………………1/3.0” HD CMOS
- Resolution…………………………………………1280(H)X720(V) pixels
- Voltage……………………………………………………………..10-32VDC
- Sensitivity…………………………………………………0.1 LUX with IR on
- IR night vision……………………………………………………………..Yes
- IR cut………………………………………………….…….…………….Yes
- S/N Ratio……………………………………………………………………46dB
- Current Draw…………………………………………………250mA(Max)
- Electronic Shutter……………………………………………………….Auto
- Lens………………………………………………………………………f 2.8mm
- IP Rating……………………………………………………………………IP69K
- Weight………………………………………………………………………338g
- Dimensions……………………………………………L81 x W65x H80mm
- Operating Temperature………………………………-20˚C to +70˚C
- View Angle…………………………………………………………………110°
Inclusions
- 1 x 5” Wireless monitor
- 1 x Monitor mount
- 1 x 1.5M Monitor cable
- 1 x Sunvisor
- 1 x Power adaptor 1.7 M length
- 1 x Wireless HD 720P reverse camera
- 1 x 2.5M Camera cable
Technical assistance
If you need assistance setting up or using your Gator product now or in the
future, call Gator Support. Australia TEL: 03 – 8587 8898
FAX: 03 – 8587 8866
Mon-Fri 9am – 5pm AEST
Please retain this user guide for future reference.
If you would like to download a digital copy of this manual, or other Gator
manuals/software, please visit the
gatordriverassist.com website and click on
‘Firmware & Manuals” or search for the product model number for more
information, accessories and products.
This manual is considered correct at time of printing but is subject to
change. For latest manuals and updates refer to the website.
Copyright © 2023 by TDJ Australia
All rights reserved. No part of this publication may be reproduced,
distributed, or transmitted in any form or by any means, including
photocopying, recording, copying or other electronic or mechanical methods,
without the prior written permission of the author.
www.gatordriverassist.com