logitech G604 Bluetooth Mouse User Guide

logitech G604 Bluetooth Mouse

SETUP INSTRUCTIONS

1. Remove the battery cover by lifting upward the back of the cover.

2. Insert the battery.

3. Remove the receiver.

4. Close the battery cover.

5. Make sure the switch on the bottom of the mouse is in the on position.

6. Recommended: Insert receiver into the receiver extension cable. Insert extension cable into your USB port.
   Alternatively, insert receiver directly into your USB port.

7. (Optional) Download Logitech G HUB software to access advanced features. Download at logitechG.com/ghub

Tips:

• To make your mouse lighter, a lithium AA battery (not included) can be used.
• G604 has a wireless range of up to 10 meters. To ensure optimal performance in noisy wireless environments, it is recommended to keep the receiver within 20 cm of the mouse.
• Keep the mouse and receiver 2 m+ away from wireless routers or other 2.4 GHz wireless devices to minimize environmental noise.

15 FULLY PROGRAMMABLE CONTROLS

1. Main click
2. Secondary click
3. Wheel click
4. DPI up
5. DPI down
6. Scroll up
7. Scroll right
8. Scroll down
9. Scroll left
10. Button G4 – Default: DPI shift
11. Button G5 – Default: Backward
12. Button G6 – Default: Forward
13. Button G7 – Default: 3
14. Button G8 – Default: 2
15. Button G9 – Default: 1

Programmable controls can be changed using Logitech G HUB software.

NON-PROGRAMMABLE CONTROLS

16. Wheel mode toggle button
17. LIGHTSPEED / Bluetooth toggle button
18. ON/OFF button

BLUETOOTH® / LIGHTSPEED DUAL CONNECTIVITY

Out of the box, your mouse and LIGHTSPEED receiver are paired.

To pair to a Bluetooth-enable computer:
Step 1: Press the connectivity button for 5 seconds until the LED indicator flashes blue quickly.
Step 2: Go to the Bluetooth settings of your computer
Step 3: Click “Add a Bluetooth Device” and select “G604 Gaming Mouse”
The color of the LED indicator will turn solid blue for 5 seconds when your mouse and computer are successfully paired.
To toggle between a Bluetooth and LIGHTSPEED mode, press the connectivity button for 0.2 sec, but less than 5 sec.

Tips:

• To pair your mouse to another Bluetooth-enable computer, repeat steps 1 to 3.
• Bluetooth mode has lower report rate compared to LIGHTSPEED. In Bluetooth mode, G604 has longer battery life as well.

LED INDICATOR

Battery life
Flashing red: battery <15%

DPI steps
Yellow: step 1 (default)
White: step 2 (default)
Orange: step 3 (default)
Magenta: step 4 (default)
Purple: step 5 (Step 5 can be activated via software only)

Mode
Cyan (solid): LIGHTSPEED mode (default)
Cyan (slow flashing): Mouse looking for previously paired

LIGHTSPEED receiver
Blue (solid): Bluetooth mode, mouse paired
Blue (fast flashing): Bluetooth pairing mode
Blue (slow flashing): Mouse looking for previously paired Bluetooth device

LOGITECH G HUB SOFTWARE

You can customize the onboard profile settings using the Logitech G HUB Software. These settings include button programming, report rate and tracking behavior. G604 allows up to 5 onboard DPI settings.
By default, G604 has the following settings:

• DPI: 400/800(default)/1600/3200
• DPI Shift: 400
• Report rate: 1 ms

logitechG.com/support/g604

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>