TPONE B0B6HSDGML Bluetooth Speakers User Guide
- June 9, 2024
- TPONE
Table of Contents
TPONE B0B6HSDGML Bluetooth Speakers
What in the box
Charging
Powerbank
Bluetooth pairing
play
water proof dustproof
Specifications
- Transducer: 48 mmx 76 mm
- Output power: 2 • 25W RMS
- Frequency response: 45Hz-20kHz
- Signal-to-noise ratio: >80dB
- Battery type: Li-ion polymer 37 Wh (equivalent to 7.4V/ 5000 mAh)
- Battery charge time: 6hours (5V/2A)
- Music play time: up to 20 hours (dependent on volume level and audio content
- Type-C port: 5V/2A(maximum)
- *Bluetooth version:** A2DP 1.3, AVR CP 1.6
- Bluetooth profile: 2400 MHz – 2483.5MHz
- Bluetooth transmitter frequency range: < 10 dBm (EIRP)
- Bluetooth’ transmitter power: 2407 MHz – 2475 MHz
- 2.4GHz SRD frequency range: 11 dBm (ERP)
- Dimensions (WxHx D ): 310 x 112 x 171 mm/12.2 x 4.4 x 6.7 inch
- Weight: 2.65kg/ 5.84Ibs
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>