KZYEE KZ3000 Pro Triple Lens Industrial Borescope User Manual
- June 14, 2024
- KZYEE
Table of Contents
USER MANUAL
MODEL:KZ3000
PRODUCT OVERVIEW
This new digital video recording endoscope is a portable, high quality multifunction inspection system featuring 4.5″full-view IPS screen with powerful recording capability, Users can capture images(JPG) or Video(AV1) with up to 2.0MP resolution for the image or 1080P high definition for the video.
APPLICATIONS
This endoscope is a premier and economical tool for: Automotive /Diesel Repair and Maintenance Inspection of hard to reach or hard to see area of equipment. It also can be used on plumbing, construction, restoration applications, science education, outdoor exploration.
SAFETY & CARE
WARNING! Please read all safety warnings and all instructions A before use. Failure to follow these warnings and instructions may result in electric shock, fire, and serious injury.
- Keep the tool dry, clean, free from oil, keep it away from water or other materials causing corrosion.
- Keep the work area clean with well lit.
- This appliance is not intended for medical use or personal inspection.
- Keep bystanders, children away while operating the tool.
- Do not overreach, keep proper footing and balance at all times.
FREATURE
- View live inspection video instantly in the 4.5″full-view IPS screen.
- Up to 2.0 mega pixel resolution for image capture, 1080P HD for recording videos.
- 8 mm diameter camera with high sensitivity for low-light VGA camera chip in the tip.
- 8 pcs adjustable LED lights.
TECHNICAL SPECIFCATIONS
Monitor:
Display: 4.5 inches Full-View IPS display
Rotation: 360° rotation
Languages: English, German, French, etc.
Ports: USB Connecting port, Micro-USB charging port, TF card slot
Camera:
Diameter: 8.0mm
Resolution: 640×480, 1280×720, 1920×1080
Viewing angle: ABC – 80°
Focus Length: Front lens(A) 3-10CM; Side lens(B) 2-6CM; Side lens(C) 1-2.5CM
Light source: 8 adjustable High-Intensity LEDs
Maintenance:
- Always keep the camera lens clean.
- Any other components have not mentioned the need to be replaced, please contact our service agents.
DESCRIPTION
- Quit Button
- UP Button
- DOWN Button
- OK Button
- LED light adjustment
- ON/OFF Button
- TF Card Port
- Camera Switch Button
Press the DOWN button, to move the cursor to the right.
Press the UP button to move it to the left.
Press the OK button to select.
Press the QUIT button to quit.
All of the icons can be selected by using the UP/DOWN buttons.
MENU TREE
With the unit powered on, press the UP/DOWN buttons to move the icon, then
press the OK button to enter into system setting
Resolution: 640480, 1280720, 1920*1080
IPS Mode: Adjust screen brightness
USB Mode: Connecting to a computer
Rotate Mode: Adjust the display screen 360 degree rotation
Language: English, Frangais, Deutsch or more
Format: Formatting TF Card
|
---|---
1. Connect the camera cable firmly to the monitor.(The mark of arrow is on
the top.) :| 2. Put the TF card into the TF card port.(Don’t insert the wrong
memory card direction.)
|
3. Press the ‘ ON’ button.| 4. Set up general setting then you can use it.
OPERATION
|
---|---
Press in Photo mode.
Press OK to snap photos. | Press in Video mode. Press OK to start record
video,
Press OK to finish record.
|
Press in Album options Press OK to view captured pictures and videos.| Click
in Settings options Press OK to enter General Settings.
DELETE THE FILE
In the video/picture album, long press the QUIT Button for 3 seconds to delete the video or photo you choose.
-
Select Album
-
Long Press the QUIT Button for 3 seconds Press OK Button to delete or delete all
CONNECTING TO A COMPUTER
Connect to a computer with the USB cable. Press the UP/DOWN buttons to select USB Mode and press the OK button.
HOW TO CHARGE THE ENDOSCOPE
Charging: Turn off the display, the power LED lights red while charging.
The power LED turns off when it’s fully charged. Charging time is
approximately 4.5 hours by using an 5V/2A adapter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>