Energizer Smart Video Doorbell User Guide
- June 7, 2024
- Energizer
Table of Contents
Step 3
Smart Video
Doorbell
EOD1-1001-SIL
WIRELESS CHIME
SETUP GUIDE
v1.2
Use this guide to finalize setup of your Wireless Chime.
Wireless Chime Features
System Specifications
Power| DC 5V, USB power supply
Reset Button| Click the Reset Button to put the Wireless Chime in pairing
mode.
Press and hold the Reset Button for 5 seconds to restore the Wireless Chime to
factory settings. It will blink quickly to confirm that the Wireless Chime has
been reset.
Indicator Light| Blue light blinking:
Wireless Chime is in Pairing Mode
Blue solid light: Paired to Smart Security Doorbell
©2019 Energizer. Energizer and certain graphic designs are trademarks of Energizer Brands, LLC and related subsidiaries and are used under license by Jem Connected IOT, Inc. All other brand names are trademarks of their respective owners. Neither Jem Connected IOT, Inc. nor Energizer Brands, LLC is affiliated with the respective owners of their trademarks.
1
First, make sure your doorbell’s Chime Setting is set to “Wireless Chime”.
You can set this when accessing your doorbell for the first time, or later in your doorbell’s settings.
2
Plug your Wireless Chime into a wall outlet using the included USB Power Adapter.
NOTE: Wireless Chime should be plugged into a wall outlet within 30ft of doorbell.
3
Click the Reset Button on the back of the Wireless Chime. The Indicator Light should start blinking.
2
4
Go to Ring settings within the device settings of the doorbell. Click the “Add” button.
The light on the Wireless Chime should stop blinking. Your Wireless Chime is now paired to your doorbell.
NOTE: You can choose ring tone sound and volume.
3
Documents / Resources
|
Energizer Smart Video
Doorbell
[pdf] User Guide
Smart Video Doorbell, EOD1-1001-SIL
---|---
|
Energizer Smart Video
Doorbell
[pdf] Installation Guide
Smart Video Doorbell
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>