LAMAX Camera User Manual

LAMAX Camera

Quick Start Guide

PACKAGE CONTENTS

1. LAMAX W7.1 action camera
2. Case, waterproof up to 40 m
3. Li-ion battery
4. Micro USB cable for charging / transferring files
5. Microfibre cloth
6. Mounts

INTRODUCTION TO THE CAMERA / CONTROLS

• POWER
• button
• MODE button
• Door to micro USB and micro HDMI connectors
• Door to battery and microSD card slot
• Thread to attach the camera to a tripod or selfie stick
  Note: To avoid damaging the camera, only use the recommended accessories.

Camera controls

Turn on and off| Hold down the POWER button or drag your thumb down and then press the POWER icon
---|---
Quickly change between photo / video mode| Drag your thumb to the side or press the MODE button
Select a mode| Touch the icon Normal or drag your thumb up to select

4K30

the desired mode

Settings| Touch the icon
View files| Touch the icon
Switch between displays| Hold down the MODE button

USING THE CAMERA FOR THE FIRST TIME

1. Insert the microSD card into the camera as shown (connectors toward the lens)

   • Press the lock button at the bottom of the camera. Slide the door outwards and open it.
   • Insert the card only when the camera is turned off and not connected to the computer.
   • Format the card directly in the camera itself the first time you use it.
   • We recommend memory cards with a higher write speed (UHS Speed Class – U3 and higher) and a maximum capacity of 128 GB.
     Note: Only use microSDHC or SDXC cards from reputable manufacturers. Generic cards do not guarantee the proper functioning of the data storage.

2. Connecting the camera to the power

   • You can charge the camera either by connecting it to a computer or using an optional AC adapter.
   • It takes approximately 4.5 hours to charge the battery from 0 to 100 %.
   • The charge indicator turns off after charging.
     Note: Charging the battery from 0 to 80 % takes 2.5 hours.

WIFI APPLICATION

Thanks to the mobile app, you will be able to change camera modes and settings or view and download recorded videos and photos directly to your mobile device.

• Scan the QR code or enter URL https://www.lamax-electronics.com/w71/app/
• Install the application on your mobile device Turn on Wi-Fi in the camera settings by touching the icon or dragging your finger from top to bottom, where you click the Wi-Fi icon .
• On your mobile device, connect to the WiFi network with the camera’s name. The WiFi password is displayed on the camera screen (factory setting is 1234567890).

FURTHER INFORMATION

For complete instructions and firmware updates scan the QR code or enter URL. http://www.lamax-electronics.com/w71/downloads

References

• LAMAX W7.1 | LAMAX Electronics | EN
• LAMAX W7.1 | LAMAX Electronics | EN

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>