Carrier AP1211 Air Purifier User Manual

: June 7, 2024
: Carrier

Table of Contents

Product usage guide
Function introduction
Model Selection
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Carrier AP1211 Air Purifier User Manual

Dear user:

Thank you for choosing our products. Please read the instruction manual carefully for safe and efficient use of this product. First of all, thank you for choosing the Air Purifier. I hope you have a healthy and comfortable living environment. The problem of indoor air pollution is serious, and indoor air pollution mainly comes from natural air pollution, pollen, dust mites, Harmful gases (formaldehyde, second-hand smoke, sweaty body odor and other substances and odors.) Because of the existence of these sources of pollution, people often have adverse reactions such as dizziness, drowsiness, cough, and nausea. Air quality of the room is important to your health. We hope that by using the Air Purifier, you and your family will have a healthier and more comfortable living environment.

Warning

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved . Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Prior to cleaning or other maintenance, the appliance must be disconnected from the supply mains.

Safety Precautions

In order to prevent damage to users and other personnel and to avoid property damage, please be sure to observe the following:

Never use liquids to clean air purifiers such as water, detergents or flammable solvents.
When cleaning the air purifier, Please disconnect the purifier from the power source. Wipe it only with a soft rag.
Air purifiers use precision components. Please use it properly to prevent it from falling or being damaged!
Keep the air purifiers around unobstructed. Do not cover the Air Purifier’ s air inlet and outlet.
For the environmental protection to do a part of your effort. Never discard the purifier with household waste.
Bring the purifier to a nearby official garbage collection center. Filters are classified as household rubbish

Product usage guide

product structure (As shown below)

Product Overview

Main body
HEPA Filter
Aromatherapy sponge
Bottom cover

Function introduction

Control Panel

Icon

|

Function Description

---|---
|

Power on/off

|

Wind speed adjustment “Low” —> “High” —0 “Auto” —0 “Sleep” Wifi button ( press the wind speed button for S seconds )

|

Negative Ion

|

Filter reset

|

Timing adjustment 1H-2H-44H-8H

Standby Insert the plug of air purifier into power source, the buzzer will ring, and all the indicators will lighten. After three seconds, air purifier is in standby mode, “power button” indicator lights up, and the other icons do not lights up.
Power on/off Tap the top power icon to switch the power on and off, the default wind speed is low, and the child lock is off (negative ion off)
Speed button
Wind speed & adjustment “Low” —> “High” —> “Auto” —> “Sleep” , Loop in turn. Press the wind speed button for 5 seconds to connect the Wi-Fi function (refer to the Wifi connection guide pages for details)
Negative Ion The Negative Ion filter atmosphere releases negative ions, offering a fresher, revitalizing indoor
Replace the filter
When the air purifier is turned on, it will count down, turn off the air purifier and restart, it will continue to count down. When the filter replacement is accumulated for 2000 hours, the replacement filter indicator light will flash, and the buzzer will beep. After replacing the new filter, keep pressing the filter reset icon for three seconds icons light fully light up and do not flash. At the same time the buzzer is turned off.
Timing Function
Touch the timing icon , adjust the countdown shutdown time 1H 2H 4H 8H Loop in turn.
Sleep stalls
Touch the wind speed adjustment icon , adjust to the sleep gear position, enter the sleep mode, all the lights are off, only the wind speed icon light and the sleep gear light are half bright, touch the wind speed icon to exit the sleep mode.

Instructions
(Before you turn on the machine for the first time, be sure to remove the filter bag before you use it.

Air purifier filter installation
Grasp the bottom cover handle by hand (the position shown by the arrow in Figure 1) and turn the bottom cover in the direction of unlocking. Then take out the filter (the item shown by the arrow in Figure 2), remove the filter bag, and put the filters back, then insert the bottom cover into the fuselage and turn it in the direction of the lock.
Figure 1

Figure 2
Aromatherapy function There are two special perfume sponges inside the bottom cover of the machine. You can drop the perfume of your favorite scent onto the sponge (as shown by the arrow in Picture 3). When the machine is working, there will be a trace of wind passing through this area, and the scent will slowly emanate with the breeze, giving you a more comfortable living environment. You can also choose to put the fragrance particles your own preferences into it. Remove the sponge when using the fragrance particles (as shown by the arrow in Picture 4).

Picture 3
Instruction picture 3
Picture 4
Instruction Picture 4
Air quality indicator

The machine is equipped with a high-precision particle sensor. After starting the machine, it automatically checks the content of particles in the air near the machine. At the same time, it is displayed by the light in the machine after the chip is convert-ed (as shown by the arrow in Picture 5).
There are 4 colors of air quality indicator, which are blue, green, purple and red. Blue means that the harmful gas content in the air is very low (air quality is excel-lent), green means less harmful air in the air (air quality is good), and purple means that the harmful gas content in the air has not reach to standard (air quality “Medium”), red means harmful gases in the air excessive content (poor air quality)
Picture 5

Instruction Picture 5