ARDESTO ETB-113W Electric Toothbrush Instruction Manual

ARDESTO ETB-113W Electric Toothbrush

IMPORTANT SAFEGUARDS

The Power toothbrush is safe and effective when used according to directions. Like any electrical appliance, however, basic safety precautions should be followed, especially when children are present.

DANGERS-WATER
To reduce the risk of burns, electrocution, fire, or injury to persons:

• Do not place or store the charger base where it can fall or be pulled into a bathtub, sink or toilet.
• Do not place or drop the charger into water or other liquid.
• Do not reach for a product that has fallen into water or other liquid. Unplug immediately.
• Do not use it while bathing.
• Unplug the charger base before cleaning and assure that it is dry before plugging it into an electrical outlet.

DANGERS-VOLTAGE
To reduce the risk of burns, electrocution, fire, or injury to persons:

• Do not plug the charger base into an outlet with a voltage other than specified on the bottom of the charger.
• This product is designed to operate within a range of 100-240 volts. Voltage converters do not guarantee compatibility.
• Do not force the plug into an outlet.
• If the plug does not fit easily into the outlet, discontinue use.

DANGERS-WARNINGS
To reduce the risk of burns, electrocution, fire, or injury to persons:

• This device can be used by children over 8 years of age and persons with physical or sensory or mental disabilities or with insufficient experience and knowledge, if they are under constant supervision or instructed in the safe use of the device and they understand the possible dangers.
• Children should be supervised to ensure they do not play with the product.
• Cleaning and customer service should not be performed by children without supervision.
• Use this product only for its intended use as described in this manual. This product is designed to clean your teeth, gums and tongue only.
• Do not use any attachments or brush heads other than those recommended by the manufacturer.
• The toothbrush is a personal care appliance and is not intended for use on multiple patients in a dental office or institution.
• If your toothpaste includes peroxide, baking soda or other bicarbonate (common in whitening toothpaste), thoroughly clean your brush head and handle to avoid cracking the plastic.
• Never operate this product if it has a damaged cord, plug or charger base. Do not use this product if it is not working properly if it has been dropped or damaged or dropped into water.
• Immediately discontinue use if the product appears damaged in any way.
• Keep the toothbrush, charger base and power cord away from heated surfaces.
• If you experience discomfort or pain in your mouth, discontinue use of this product and contact a dentist.
• Do not attempt to remove the battery. The device has a built-in rechargeable battery that must be disposed of separately only after the end of the life of the electric toothbrush. More details in the section

«Disposal».

• Do not clean the toothbrush in the dishwasher.
• Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Regarding how to clean the toothbrush surfaces in contact with hand and skin, please refer to the section

Simplified Declaration of Conformity
Shenzhen Risun Technology Co., Ltd. hereby declares that the type of radio equipment (electric toothbrush) complies with the Technical Regulations for Radio Equipment. The full text of the declaration of conformity is available on the website at: https://erc.ua/uk/declarations/ frequency band(s) in which the radio equipment operates: 148.5 – 5000 kHz maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates: minus 15 dBµA/m Software version: the software does not apply

MEDICAL-WARNINGS

• If you have had oral surgery or gum surgery within the past two months, consult your dental provider before using the product.
• Consult your dental provider if excessive bleeding occurs while using this product or minor bleeding continues to occur after one week of use. Consult your physician or implant device manufacturer prior to using this product if you have questions concerning the combined use of this product with a pacemaker or other implanted medical device(s).
• Consult your physician prior to using the toothbrush if you have any medical concerns.
• The toothbrush has been tested and is certified as per ETL and CE regulations.
• Always unplug this product immediately after using it.
• Never use it while sleeping or drowsy.
• The production date and device serial number are indicated on the packaging.

EQUIPMENT

• Electric Toothbrush – 1 pc
• Brush head – 2 pcs
• Inductive charging base – 1 pc
• Instruction manual (warranty card is included) – 1 pc

CONFIGURATION

GETTING STARTED
Charging the toothbrush Be sure to turn off the toothbrush before charging. plug the power plug into the outlet. Place the handle in the charger. The charger indicator light will be lit, indicating the handle is charging. After the battery is fully charged, the charge indicator light will turn solid green, indicating the toothbrush is fully charged.
Notes:

1.  It takes at least 24 hours to charge the battery fully.
2. The toothbrush must be charged for 24 hours, if:
   •  this is the first time using the toothbrush;
   •  the toothbrush has not been used for more than three months;
3. To keep the battery fully charged, we recommend that you keep the toothbrush in the charger when not in use.
4. During charging, the toothbrush will get warm, but this is normal.
5.  The operating duration will become shorter as the battery gets older. If the toothbrush operates only for 1 short time after being fully charged, this means that the battery is nearing the end of its life cycle. Contact the service center for support.

HOW TO USE

1. Slide the brush head onto the handle. Push the brush head down until it locks into place on the handle. Note: There is a small gap between the color ring and the handle. (Fig 1)

2. Wet the bristles and apply a small amount of toothpaste.

3. Place the bristles against the teeth at a slight angle towards the gum line. (Fig 2)  Press the mode button to select mode.

4. If you know the mode used last time, you need not select the mode again. There are 4 modes.

   •  CLEAN: Standard mode for superior teeth cleaning.
   • SOFT: Gently caress, and carefully clean sensitive mouth.
   • WHITEN: Teeth cleaning with polishing and whitening.
   • MASSAGE: Pulsates for gentle gum stimulation.
     Notes
     During brushing, if press the Mode button, a toothbrush will work at the next mode and start another 2 minutes cycle and the mode indicator will light up. Apply light pressure and gently move the brush head slowly across the teeth in a small back-and-forth motion.

5.  In order to maximize cleaning effectiveness, divide your mouth in 4 sections. Start with Section 1 and brush each section for 30 seconds. The brushing action will pause between each 30-second interval, indicating when to move on to the next section.

6. ) The toothbrush will automatically stop after

7. minutes of use. (Fig 3)  Pull the brush head out from the toothbrush.(Fig 4) ® Rinse both the brush head and handle under running water wipe them dry. (Fig 5) Put the handle back into the charger.

MAINTENANCE

Be sure to remove the plug from the electrical outlet before cleaning the product.

Toothbrush

1. Remove the brush head.
2. Wipe all surface areas with a damp cloth and place the handle back into the charger.
3. Do not submerge the handle into water. Rinse the brush head and bristles after each use.
4.  Do not clean in the dishwasher.

Charger

1. Using a soft cloth, wipe off any dirt on the charger and the storage. Fig. 7
2. Clean the plug periodically to ensure it remains in good working order. The accumulation of dust or dirt on the plug can cause an electric shock, overheating or fire.

TROUBLESHOOTING

DISPOSAL

The power source of this product is a Lithium-ion battery which can be recycled. At the end of the product’s life, always remove the battery before you discard the product, and recycle or dispose of the battery according to local waste management requirements. If you have recycling questions, contact your local waste management office.

Removing and recycling the battery
Do not disassemble the product at any time other than when disposing of it. Doing so earlier will destroy the product. Observe basic safety precautions. The appliance must be disconnected from the supply mains when removing the battery.

1. Before removing the battery, be sure to completely drain the unit of power.
2. Use a screwdriver to remove the screw cover and battery door.
3. Hold the handle upside down, press the toothbrush shaft, and remove the two hooks to release the internal components of the handle.
4. Insert the screwdriver next to the battery connections, and twist to break the connections.
5. Remove the circuit board and pry the battery from the plastic carrier.
6. Recycle or dispose of the battery properly. Ask your local waste management office if they accept the remaining toothbrush components for recycling.

Be careful not to short-circuit the negative and positive poles of the battery. Do not connect the appliance to the mains again after you have removed the battery.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>