My Total Floors® Upright Vacuum is loud | Support
- June 7, 2024
- Bissell
Table of Contents
-
Pull out the Pre-Motor Filter Tray located below the dirt tank and wash the Filter with water and a mild detergent
-
Let it completely air dry before placing back in the machine
-
Unplug the vacuum and turn the vacuum over so the Brush Roll is facing up
-
Remove the 7 screws that hold on the Brush Roll Access plate
-
Pull brush straight out and inspect the brush and belt for damage
- Brush should spin easily
- Belt should be intact
- If part is damaged, it will need to be replaced
-
If the vacuum continues to have a loud noise, please visit a BISSELL Authorized Service Center or Contact Us
-
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>