SKYRC GSM020 SK-500023 GNSS Performance Analyzer Speed Meter Instruction Manual
- June 7, 2024
- SKYRC
Table of Contents
- **GNSS PERFORMANCE ANALYZER
- STATUS OF LED INDICATOR
- CHARGING THE DEVICE BEFORE USE
- MOUNTING THE DEVICE
- GNSS PERFORMANCE ANALYZER APP
- DRAG – TO TELL THE TRUTH BEFORE AND AFTER MODIFICATIONS
- TRACK – PERFORMANCE TEST
- FLYING – HOW HIGH THINGS FLY & PERFORMANCE TEST
- SPECIFICATIONS
- WARRANTY AND SERVICE
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
GSMO20 Instruction Manual
SKYRC
SK-500023
Think you’re FAST? Prove it!
**GNSS PERFORMANCE ANALYZER
**
GNSS Performance Analyzer (GSMO20) allows you to measure and analyze many
aspects of your RC car & airplane’s performance using the latest GNSS engine
(GPS, GLONASS) which gives you acceleration, G-force, speed, distance, and
time.
This device uses a barometric pressure sensor to detect the height above the
ground level. It can measure peak altitude up to 29,500 feet (9000m)
For everyone Dying to gauge their performance, here% is an affordable way to
do just that Just got some new mods installed? Get some real feedback, really
quickly.
Knowledge is power and by knowing the facts before and after modifications,
your efforts will not be in vain. GNSS Performance Meter will help you make
sense of the improvements and help you make educated decisions to make sure
you’re not spinning your wheels.
This is a professional-grade instrument accessible to enthusiasts. It’s every
modeler’s dream. Enjoy!
STATUS OF LED INDICATOR
LED | COLOR | STATUS |
---|---|---|
Blue tooth | Blue | Bluetooth connected |
Off | Bluetooth disconnected | |
GNSS | Green | GNSS position fixed |
Off | GNSS position not fixed | |
Power | White | Working |
Off | Stand by or no power | |
Blinking | Charging Battery | |
Fast Blinking | Power Low |
CHARGING THE DEVICE BEFORE USE
Charge the device using the provided USB cable, connected either to a powered USB port or USB charger. During charging, the power LED will slowly blink. Once the internal battery of the device has been fully recharged the Power LED will change to white solid. This should take no more than 3 hours. The battery should last for up to 6 hours of operation. In standby mode, the battery will last for 2 weeks.
MOUNTING THE DEVICE
- Determine where you would like to install the device. The antenna can receive signals through glass and plastic but not metal or other conductive surfaces. To avoid interference, ensure the antenna is not covered or shielded by any metallic object.
- Make sure the surface is clean. Remove any dirt or debris.
- Use hook and loop tape to secure the device to the surface.
- This device uses a barometric pressure sensor to detect altitude, so it needs to be exposed to air pressure and doesn’t put in an airtight container.
GNSS PERFORMANCE ANALYZER APP
Install the free GNSS Performance Analyzer app from either the App Store or
Google Play. This device needs Bluetooth to communicate, so you’ll need to
turn on Bluetooth.
Connect Before Using
When you first launch the app, you will ask to choose the device. Click the
Bluetooth Symbol and select the device.
Acquiring satellites signals may take few minutes. The GNSS LED will turn
GREEN when it has connected with GNSS satellites.
Reconnect After Using
During the testing, you will lose your Bluetooth connection since the
connection range is up to 30 feet (10 meters). It is normal for the controls
to disappear when your analyzer travels out of range. Don’t worry—it’s still
working and recording! After racing or flight, put your mobile and GNSS
performance analyzer closer. The mobile will connect to the analyzer
automatically.
https://www.skyrc.com/help/download/Accessory/Measurement/GNSS_PA/
DRAG – TO TELL THE TRUTH BEFORE AND AFTER MODIFICATIONS
For gear tuning or performance test.
Automatic start/stop logging: The logging behavior of the device is to
automatically start and stop logging. Measuring every run automatically
without pressing any button. The devices start logging when satellite lock has
been achieved and a speed value higher than 1.0 km/h is detected and stops
logging when pre-setting criteria are achieved.
TRACK – PERFORMANCE TEST
Stop wondering how fast your RC car can run. This device is ideal for RC racing. The user could easily work out data such as speed, total distance. It also records the top speed.
FLYING – HOW HIGH THINGS FLY & PERFORMANCE TEST
Under “FLYING” mode, you can measures peak altitude to 29,500 feet (9000 m). It is great for planes,quad-copters, rockets, helicopters, gliders, and kites.
SPECIFICATIONS
- Concurrent reception of GPS & GLONASS
- Receiver: L1, 1575.42 MHZ
- Update frequency: 10 Hz.
- Antenna type: Built-in
- Satellite signal reception sensitivity: -167dBm
|
- Dimensions: 39X40X16mm
- Weight: 35g
- Operating temperature: 0°C to +40°C
- Storage temperature: -10°C to +70°C
- Operating humidety: 5% to 90%
---|---
WARRANTY AND SERVICE
THIS WARRANTY IS ONLY VALID IN THE COUNTRY OF PURCHASE AND THROUGH A FORMAL
DISTRIBUTOR.
We guarantee this product to be free of manufacturing and assembly defects for
a period of one year from the time of purchase. The warranty only applies to
material or operational defects, which are present at the time of purchase.
During that period, we will repair or replace free of service charge for
products deemed defective due to those causes. For any repair or replacement
service, please contact your dealer in the first instance, who is responsible
for processing guarantee claims. This warranty is not valid for any damage or
subsequent damage arising as a result of misuse, modification, or as a result
of failure to observe the procedures outlined in this manual.
SKYRC TECHNOLOGY CO., LTD.
www.skyrc.com
All specifications and figures are subject to change without notice.
Printed in China
©2020.08
Version:1.2
7504-1268-03
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>