SKYRC SK100055 E4 Balance LiPo Charger Instructions
- October 27, 2023
- SKYRC
Table of Contents
SKYRC SK100055 E4 Balance LiPo Charger
INTRODUCTION
SKYRC e4 Charger is an economic, high quality 100-240V AC balance charger, designed for charging LiPo and LiFe batteries from 2-4 cells in balance mode. The circuit power is 20W and max charge current can reach to 3A. There are three kinds of charge current 1A/2A/3A that can be selected. You could select the proper charge current according to the battery capacity. There is one LED indicating the charge status (ready to charge/charge in CC mode/charge in CV/ mode/charge finish) and four LEDs indicating each battery cell status (charge/discharge). In this case, we could know the charge process at any time easily through the LEDs status. The operation of the charger is also very simple. There are two toggle switches in the charger which can be used to selected battery type and charge current. After you power on the charger, select the battery type and charge current, connect the battery and charger with the balance board, the charger will start working.
Features
- Low Cost
- Built in AC Power Supply
- Wide AC Power Input Range (100-240V)
- Charge in balance mode
Illustration
TECHNISCHE DATEN
- Input Voltage AC Input: 100-240V, 50-60 Hz
- Controls 2 Switches
- Indication 4 LEDs for Balancing 1 LED for Charging Status
- Case Material Plastic
- Balance Current 200mA/cell
- Maximum Cells LiPo/LiFe: 2-4 cells
- Charge Current 1A, 2A, 3A
- Charge Wattage 20W
- Balance Cells 6 cells
- Weight 176g
- Dimensions (LxWxH) 69.4×110.7×40.5mm
DOWNLOADS
SkyRCe4[SK100055] Manual (673.8 KiB)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>