SKYRC SK-500040 Angle Gauge Instruction Manual

October 30, 2023
SKYRC

SKYRC LOGO ANGLE GAUGE
Instruction Manual
v1.0
SK – 500040

Introduction

Congratulations on the purchase of SkyRC Angle Gauge!
The gauge consists of three sensing modules, which are wirelessly controlled through Bluetooth. It measures the surface angle and relative angle difference.
Download the RC Gears app to get started to measure the real-time measuring data.

What is inside the box

SKYRC SK 500040 Angle Gauge - boxSKYRC SK 500040
Angle Gauge - QR Code **https://www.skyrc.com/qrcode/?key=RCGears

  • Please scan the QR code to download the RC
    Gears app from App Store or Google Play!
    **

Connecting

  1. Long press to turn on. Enable the Bluetooth on your smartphone and open the APP.SKYRC SK 500040 Angle Gauge - Connecting 1
  2. Search to connectSKYRC SK 500040 Angle Gauge - Connecting 2
  3. Set up the reference surface, left and right. The corresponding module flashes blue during the setting.SKYRC SK 500040 Angle Gauge - Connecting 3

Measuring Angles

  1. Connect the modules.

  2. Fix the reference module to the position where the surface of the model aircraft is referenced.SKYRC SK 500040 Angle Gauge - Angles 1

  3. Fix the left and right modules on the rudder surface to measure.
    Note: The right-angle must face the outside of the rudder surface and be parallel to the edge of the rudder surface.SKYRC SK 500040 Angle Gauge -
Angles 2

  4. Set and input the angle in reference to the model aircraft manual.SKYRC SK 500040 Angle Gauge - Angles 3

  5. Set the angle to the maximum with the remote control, and check whether the calibration range meets the requirements indicated in the manual.
    SKYRC SK 500040 Angle Gauge - Angles 4| SKYRC SK
500040 Angle Gauge - Angles 5
    ---|---
    RED warns that the maximum adjustable angle of the corresponding wing is greater than the calibration range| GREEN indicates that the maximum adjustable angle of the corresponding wing is within the calibration range

Measure Throw

  1. Connect the modules, and choose Throw to enter the page.

  2. Fix the reference module to the position where the surface of the model aircraft is referenced

  3. Fix the left and right modules on the rudder surface to measure.
    Note: The right-angle must face the outside of the rudder surface and be parallel to the edge of the rudder surface.

  4. Set the throw, measure the width of the rudder surface, and input the width and throw in reference to the model aircraft manual.SKYRC SK 500040 Angle Gauge - Measure 1

  5. Set the throw, measure the width of the rudder surface, and input the width and throw in reference to the model aircraft manual.
    SKYRC SK 500040 Angle Gauge - Measure 2| SKYRC SK
500040 Angle Gauge - Measure 3
    ---|---
    RED warns that the maximum throw angle of the corresponding wing is greater than the calibration
    range| GREEN indicates that the maximum throw angle of the corresponding wing is within the calibration range

LED Indicator

Constant Blue App is connected and working
Flashing Blue Standby, waiting to be connected
Flashing Red Charging

SKYRC SK 500040 Angle Gauge - Indicator www.modelsport.sk

Specifications

Working Voltage: 3.4-4.2V
Working Current: <10mA
Interface: Type C
Input Voltage: 5V
Input Current: 200-300mA
Low-voltage Protection:<3.4V (Flashes Red)
Measuring Accuracy: ±2º
Throw Angle: ±0.1mm
Working Temperature: 0ºC-40ºC
Working Humidity: 5%-90% (No Condensation)
Storage Temperature: -10ºC-50ºC
Storage Humidity: 1%-75% (No Condensation)
Size: 48.125.612.6mm
Weight: ≈25g

WARRANTY AND SERVICE
We guarantee this product to be free of manufacturing and assembly defects for a period of one year from the time of purchase. The warranty only applies to material or operational defects, which are present at the time of purchase. During that period, we will repair or replace free of service charge for products deemed defective due to those causes. This warranty is not valid for any damage or subsequent damage arising as a result of misuse, modification or as a result of failure to observe the procedures outlined in this manual.
Note:

  1. The warranty service is valid in China only.
  2. If you need warranty service overseas, please contact your dealer in the first instance, who is responsible for processing guarantee claims overseas. Due to high shipping cost, complicated custom clearance procedures to send back to China. Please understand SkyRC can’t provide warranty service to overseas end user directly.
  3. If you have any questions which are not mentioned in the manual, please feel free to send email to info@skyrc.com.

SKYRC SK 500040 Angle Gauge - WARRANTY Manufactured by
SKYRC TECHNOLOGY CO., LTD.
www.skyrc.com
All specifications and figures are subject
to change without notice.

© 2021.05
7504-1490-01

Documents / Resources

| SKYRC SK-500040 Angle Gauge [pdf] Instruction Manual
SK-500040 Angle Gauge, SK-500040, Angle Gauge, Gauge
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals