SKYRC SK100013 Quattro B6AC Charger Instructions
- October 27, 2023
- SKYRC
Table of Contents
SKYRC SK100013 Quattro B6AC Charger
SkyRC Quattro B6AC
SKYRC QUATTRO B6AC is a high-performance, micro processor control charge/discharge station with battery management suitable for use with all current battery types. With integral equalizer for six-cell Lithium-Ion (LiIon), Lithium-Polymer (LiPo) and Lithium-Ferrum (LiFe) batteries.
Maximum 6A charge current; can be powered by a 12 Volt car battery or from 100V-240V via the built in switch-mode power supply.
And the circuit features four totally independent identical power outputs
which are powered 50 watts each. Total powers are 200 watts. As a result , it
can charge or discharge up to 4 x 15 cells of NiCd/NiMH or 4 x 6 series of
Lithium batteries simultaneously. Quattro B6AC has four individual cell
voltage balancer at each outputs, so it does not required any balancer
separately when charging Lithium Battery
(LiPo/LiIon/LiFe) for voltage balancing.
When a Nickel battery is fully charged, the unit terminates the process using
the Delta-Peak method. Lithium and lead (Pb) batteries are charged using the
CC-CV method.
The fan cooling system is so smart and efficient. The fan speed is controlled
by internal temperature sensor.
SKYRC QUATTRO B6AC allows you to plug 4 batteries into one charger
simultaneously, and it will intelligently and automatically charge all 4 of
them at once to their maximum
capacity. To top of it, the batteries being charged do not even need to have
the same configuration. You can connect different chemistry(Ni-MH/Ni-
CD/LiPo/LiFe)batteries into
any of the charging ports. No more staying up late for charging batteries.
Optimized Operating Software
SKYRC QUATTRO B6AC features the so-called AUTO function that set the feeding
current during the process of charging or discharging. Especially for Lithium
batteries, it can prevent the overcharging which may lead to an explosion due
to the user’s fault. It can disconnect the circuit automatically and alarm
once detecting any malfunction. All the programs of this product were
controlled through two way linkage and communication, to achieve the maximum
safety and minimize the trouble. All the settings can be configured
by users!
Internal Independent Lithium Battery Balancer
SKYRC QUATTRO B6AC employs an individual-cell-voltage balancer. It isn’t necessary to connect an external balancer for balance charging.
Balancing Individual Cells Battery Discharging
During the process of discharging, SKYRC QUATTRO B6AC can monitor and balance
each cell of the battery individually. Error message will be indicated and the
process will be ended automatically if the voltage of any single one cell is
abnormal.
Fast and Storage Mode Lithium Charge
Purposes to charge lithium battery varies, ‘fast’ charge reduce the duration
of charging, whereas ‘store’ state can control the final voltage of your
battery, so as to store for a long time and protect useful time of the
battery.
Cyclic Charging/Discharging
1 to 5 cyclic and continuous process of charge>discharge or discharge > charge
is operable for battery refreshing and balancing to stimulate the battery’s
activity.
Data Store/Load
The maximum ten batteries’ data can be stored for each output(10X4SET). You
can keep the data pertaining to program setting of the battery of continuous
charging or discharging.
Users can call out these data at any time without any special program setting.
Terminal Voltage Control (TVC)
The charger allows user to change the end voltage.
LiPo Battery Meter
The user can check battery’s total voltage, the highest voltage, the lowest
voltage and each cell’s voltage.
PFC
A PFC (Power Factor Correction) is internal integrated.
Adaptable to Various Types of Lithium Battery
SKYRC QUATTRO B6AC is adaptable to various types of Lithium batteries, such as
Li-ion, LiPo and the new LiFe series of batteries.
Automatic Charging Current Limit
You can set up the upper limit of the charging current when charging your NiMH
or NiCd battery, it is useful for the NiMH battery of low impedance and
capacity in the ‘AUTO’ charging mode.
Capacity Limit
The charging capacity is always calculated as the charging current multiplied
by time. If the charging capacity exceeds the limit, the process will be
terminated automatically when you set the maximum value.
Temperature Threshold
The battery’s internal chemical reaction will cause the temperature of the
battery to rise. If the temperature limit is reached, the process will be
terminated.
Processing Time Limit
You can also limit the maximum process time to avoid any possible defect.
Accessories Included
Technical Data
- Input Voltage AC Input: 100-240V
- DC Input: 11-18V
- Controls 4 Buttons for each Channel
- Display Type 2×16 LCD screen for each Channel
- Display Backlight Blue
- Case Material Metal
- Balance Current 200mA/cell
- Maximum Cells LiPo/LiFe/LiIon: 1-6 cells
- NiMH/NiCd: 1-15 cells
- Pb: 2-20V
- Charge Current 0.1-6A
- Charge Wattage 4x50W
- Discharge Current 0.1-2A
- Discharge Wattage 4x5W
- Balance Cells 6 cells
- Weight 1.73kg
- Dimensions (LxWxH) 225x170x66mm
DOWNLOADS
Bedienungsanleitung SkyRC Quattro B6AC (1.9 MiB)