Kent Ace Plus Mineral RO Water Purifier Instructions

Instructions Handbook

Dear Customer,

At the outset, allow us to thank you for your trust in KENT water purifier, We take pride in our reputation for product quality and industry proven performance. We are certain that your decision to own KENT Ace Plus Mineral RO™ Water Purifier will go a long way towards keeping you and your famiy in good health. We are confident that you will be satisfied with its performance and that it will serve your need for safer and cleaner drinking water without any compromise.

This guide will help you in getting the best out of your water purifier. Piease go through this booklet to familiarise yourself with its operation and maintenance.

You can look forward to years of touble-free service. To ensure that the warranty of your water purifier is effective, it is important that you fill-up the enclosed warranty card and mail us the installation report within 15 days of purchase. In case you need any further information, contact your nearest KENT dealer or branch.

Best Wishes,

KENT RO SYSTEMS LTD.

KENT TECHNOLOGY – A Breakthrough in Water Purification*

KENT proudly presents KENT ACE Pius MINERAL ROTM – it’s new and advanced domestic water purifier which provides purer & healthier drinking water.
The futuristic KENT ACE Plus, developed at KENT laboratory, broadly comprises of a state-of-the-art RO+UF+TDS Control System. The initial purification by RO membrane with porosity as fine as 0.0001 mitrons reduces even dissolved impurities (hard salts, heavy metals, etc.). Double purification by UF membrane gives additional protection from deadly harriul micro-organisms. Moreover, the patented TOS Control System intelligently retains essential natural minerals in the purified water, thus, taking total care of your health and wellbeing.

KENT is pleased to introduce Zero Water Wastage Technology ™ that recircuales rejected water to overhead tank with its own pump to make it a Zero Water Wastage RO. This unique technology helps you make water pure, without wasting any water whde retaining essential minerals.

Salient Features of KENT Ace Plus Mineral RO™ Water Purifier

• Zero Water Wastage**
• Purification by RO+UV+UF+TOS Control+UV in Tank makes water pure
• Suitable for purification of brackish / tap water /Municipal Corporation Water Supply
• Wall mounted design; best suited for Indian homes and offices
  • Fully automatic operation, with auto-on and auko-off function
  • Computer controlled operations for enhanced Purity and long life
  • RO membrane fused inside membrane housing to prevent tampering
  • Vertically mounted SMPS for protection from water
  • Use of push-fi fittings for leakage and maintenance free performance
  • An aesthetically appealing design
  • ABS construction for corosion free use
  • Inbuilt Auto-flushing system
  • 8L storage tank
  • High purification capacity of 20 L/hr.

Items in the Box

No.
6. Buk Head Union| 1 No.| 12. Warranty Card| 1 No.

• Tested & certifed by TUV-SUD South Asia {PF} Lid.
  *Zero Water Wastage is based on the standard teating conditions

Important Instructions

Avoid exposure to direct sunlight and installation in damp areas,| Make sure that the temperature of water entering the purifier is within 10ºC-40ºC
---|---
Tho rejected water can be re- circulated to overhead tank for Zero Water Wastage.| The maximum distance between the water source and the should not be more than 3 meters.
Avoid sharp bends in the pipe. Do not bend or block the reject water pipe.| Do not confine the purifier in a cabinet
In case of not using the purifier for more than two days, kindly switch off the power supply and drain the storage tank.| To keep the storage tank clean, it should be drained once in 15 days.
Use Genuine KENT Spaanes for optimum performance.| Do not try to service the purifier on your own. Instead, call service technician for help.

Reverse Osmosis Process

The Reverse Osmosis process, also known as hyper filtration, is the finest filtration process known till date. The process ensures the reduction of particles as small as ions from a solution. Reverse Osmosis uses a semi- permeable Thambrane to reduce sais from potable/brackish water. In Reverse Osmosis. water pressure applied to the concantrated side forces the process of osmosis into reverse. Under enough pressure, treated water is squeezed” through the membrane from the concentrated side to the diluted side. Salts dissolved in water as charged ions are repealed by the RO membrane. The rected impurities on the concentrated side of the membrane are washed away in a stream of wastewater. and thus do not get accumulated as in a traditional filter.

UV Process

The UN fight has shorter wavelength (higher energy) than the visible light. It is called ultra-violet because it is just beyond the violet light in the light spectrum, Technically, the ultra-violet light is defined to be any wavelength of fight. which is shorter than 400 nanometers.
UN rays, which penetrate into tha micro-organisms, are absorbed by the DNA of the pathogen in the. water. The DNA is altered in such a way that the pathogen cannot reproduce, Thus, they are essentially Wlied and cannot cause infection. This process of DNA modification is called inactivation.

Note: The purified water stored in the tank is disinfected using Uv LED, which automatically switches on for 30 minutes in a two-hour cycle.

Auto-flushing System

The purpose of the Auto-flushing system is to help prevent scaling or fouling of the RO membrane by providing a rapid rinse which washes away imputities from the membrane’s surface and keeps the membrane clean, Il offers folowing benefits.

• Lowers rejected water outflow
• Improves “TDS* rejection rate i.e incraases RO membrane efficiency
• Extends ite of RO membrane

Water Flow Diagram

Electrical Circuit Diagram

NOTE: The above specifications are subject to modifications for improvement without notice.

UV Fail Alarm

KENT ACE Fla Mineral ROTM Water Purifier has an in-built feature that sounds an audible alarm if the UV Lamp malfunctions, This feature is provided to ensure purity. This UV Fail Alarm will sound as follows: Single short beeps after every two seconds. The puriler will stop its purification process in such a circumstance.

Filter Change Alarm*

KENT ACE Pus Mineral ROTM Water Purifier has an in-built feature that sounds an audible alarm to indicate replacement time for filters. This alarm will be audible after 700 hrs of use since the last filter change (or since the time of installation). The Filter Change Alarm will sound as follows:

4 short beeps after every two seconds: for 30 seconds. The alarm will repeat after every 2 hours of use.
In case such an alarm’s audible, please call the service technician and request him to change the fitters of the purifier. However, if the filters are not changed within the next 60 hours of operation, the purifier will stop functioning to ensure purity and hygiene. The following alarm will be audible after 60 Hs. A continuous beep for an infinite time.

In casa, such an alarm is audible, kindly switch off the purifier and call the service technician to replace the filters. In such a circumstance, the purifier wi not function unless the filters are changed.

Computer Controlled Operation*

To ensure delivery of purer and healthier water, a micro-processor is installed in the pusilier that performs. the following functions:

UV Stabilization Delay: To ensure that the UV lamp is pre-heated and is working at its optimum level before it starts disinfecting water, the controller provides a two seconds delay to UV lamp when the Dunia is switched on. During this period, only the UV lamp is switched on and other electical davicas of the purifier are swatched off.

Purification Delay: To ensure that the idle water tying in the internal pipes and in the UV chamber is disinfected before being passed into the storage tank, the system provides 5-second delay when the Purifier is switched on, During this time, the UV lamp kills all micro-organisms that may be in the water inside UV chamber. After this delay, all other electrical devices such as booster pump and solenoid valve are switched on to start normal purification process.

Audible Alarm: The controller also controls the timing of UV Fail Alarm and the Fater Change Alarm.

*Tested & certified by TUV-SUD South Asia (P) LTD.

Automatic Operation

• The purifier automatically shuts off when the storage tanks are full
• The purifier automatically flushes & cleans the RO membrane on periodic intervals
• The purifier does not start if the inlet water supply pressure is below 0.3 ko/cm2
• The purifier automatically restarts when water level drops below the maximum
• The purifier does not allow any water rejection in absence of electricity or when tank is full

Installation Instructions

The KENT ACE Plus Mineral ROTM Water Purifier is a product of advanced technology, which ensures safe and clean drinking water. The purifier is easy and convenient to install.

Recommended Site Preparations:

• Single Phase 100-250 V AC, 50-60 Hz. connection not more than 3m away from the point of installation of purifier
• Raw water supply with % inch ripple not more than 3m away
• Drain for rejected water not more than Gm away
• Space as per dimensions of the purifier
• Wail plane surface for mounting two screws and holding the machine
• The system and installation must comply with state and local laws and regulations Specific Instructions:
• KENT ACE Pus Mineral ROTM Water Purifier is a wall mountable purther. Make sure that it is only mounted on a wall. Avoid installation on wooden and metallic stands
• For optimum performance and minimum intel pressure required, ensure that the raw water supply tank is a least 10 ff above the level at which the purifier is installed
• It is preferable to install the punter near a sink So that inlet and reject water lines are easily available

Installation Procedure:
Step-1:

1. Paste the central drill sticker on wall at (3.6 Faal to 4.0 Feat from the ground} as per your convenience.
2. Ensure that sticker is pasted straight on the wall, then dill holes as per the space provided on sticker.
3. Now, insert the pull up with the help of a hammer.
4. Serew two 10X50 sall-taping screws, 5.4 Inches (138 mm) apart horizontally.
5. Carefuly hang the purifier on the wall with the help of wall-mounting slot holes provided on back skin of the purtier.
   Note: If the wall is not straight or the screws are not property drilled in an even position, It will damage your purifier.
   Note: Keep the davies away from heat or direct sunlight.

Step-2:

1. Firat fix the SS ball valve (marked as no. 4) to the 1/4 inch port of the 3-way connecter (marked as no. 2) as shown in figure 2.

2. Connect the 3-way connector to the raw water supply (marked as no. 1) as shown in the figure 3.
   The 3-way connector is fitted in line with the raw water supply.

3. The other end of the 3-way connector can be connected to a lap (marked as 0.3) as shown in figure 4. of can be plugged off f not required.

Step-3:

1. another end to the upper push-fit elbow fitting to the left-hand side of the purifier labeled as WATER IN, as shown in fig 1.
2. Similarly, connect one end of the white pipe to the lower elbow fitting Connector in-tank labeled as REJECT WATER and leave the other and in the overhead tank, as shown in fig 2.

Step-4:

Before connecting the power supply, it is important that you perform the following functions:

1. Open the SS ball valve (Handle partial to the ball valve) to start the flow of water into the purifier, as shown in the figure.
2. Wart for 2-3 minutes to ensure that the fillers are soaked in water.

Step-5:

1. Connect the power supply,
2. Instafation is completa.

TDS Adjustment’

A unique feature in KENT ACE Pius Mineral ROTM Water Purifier is the TDS control valve, which is not available in any other domestic water purifier to date. This feature allows the user to control the content of natural minerals (TDS) in purified water.

To increase the TDS level, the user can tum the screw of the valve anticlockwise: it will result in more mineral content in teated water. To reduce the TDS level, user can tum the screw valve clockwise, it will result in less mineral content in treated water. We recommend the TDS of the purifier to be kept at lowest but not below 50 mg/l.

Starting-up the Purifier

• Switch on the power supply
• Wart till the storage tank fully fills up
• Switch off the power supply
• Drain the storage tank by opening the drain plug present at the bottom of that storage tank so as to remove any dust particles presant in the pipes and storage tank
• Close the dram plug & switch on the power supply
• The purifier is ready to use

Maintenance

To ensure that the purifier operates at its optimum level, a routine maintenance must be Wormed The frequency of the maintenance will greatly depend upon the raw water quality and consumption at treated water.

• Storer tank must be drained once in 2 weeks. To do so, switch off the power supply, open the drain plug at the bottom of the tank 8 allow the water to drain. Then screw back the plug and switch on the power supply
• Replace sediment, activated carbon & post carbon when the filter change alarm Is audible OR atter every 12 months. It is recommended to change the FRT when the filters are replaced
• Replace the RO membrane once in a year
• If you are not going to use the purifier for a long time (in case you are on a holiday. four or out of home). make sure that you disconnect the per supply, turn off the raw water supply ard drat) the storage tank

The reverse osmosis system contains a replaceable treatment component critical for the effective reduction of total dissolved solids and that product water shall be tested periodically to verify that the system is performing properly.

Replacement of spare parts are as under:

Note: Filters and membrane are consumables. Their rep4aperrent time is dependent on the quality of raw water and water consumption, They are not covered under the warranty, However, if a filter chokes within six months and a membrane within a year, it will tie cleaned/repaired/replaced free of cost. Changing the filters pod system inspection is available on call. The treatment capacity of RO membrane will reduce with time due to clogging of pores of membranes, ‘This reverse osmosis system contains a replaceable component critical to the efficiency of the system. Replacement of the r- yr, -a osmosis component should be %%Oh one of the identical specifications as defined by the manufacturer, to ensure the same efficiency and contaminant reduction performance.’

Important Safety Instructions

• If the supply cord is damaged, it must be replaced by the original part in order to avoid hazard,

• Children should be supervised to ensure that they do not play Mb the appliance

• Ths appliance is not intended for use by persons (including chkfren) with reduced physioalw&enscfy or mental capabilites, or lack of eipenence and kricAldiedge, unless they have been given supervision of instruction concerning use of the appliance by a person responsible for Mr safety
  Warning

• Do not operate the W’-C emitter when it is removed from the ap0ance enclosure.

• Read the maintenance instructions before opening the applince.

• The appliance must be disconnected from the supply before replacing the UV>C emitter.

Technical Specificatons

• Puriticatbon capacity tested tor raw water having IDS lewd of 750 ppm at mean temperature.

Testing information

The System has boon tested according to 6 10500:2012 (Stardeircts tor drinking water as per Bureau of Inckan Standards for reduction of the handles substances.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>