Vision X OPT-85660X OptiTech LED Beacon Instruction Manual

Table of Contents

WARNING

Read carefully and understand all instructions before operating.

It is not recommended to use magnetically mounted warning devices on the outside of a vehicle in motion. Usage is at the sole risk and responsibility of the user.
Risk of electrical shock; do not use in an environment with gas, combustible or explosive materials, or hot objects.
Do not open, repair or modify.
Use only under the recommended voltage and frequency requirements.
Do not look directly at the light, as this will result in dazzling.
The minimum distance from lighted objects is 0.1 m.
The specification in this manual is based on standard lab testing, different environments may influence the data.
California Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov

INSTALLATION – FLANGE BASE

Mark wire access and mounting holes on the mounting surface by using the mounting pad.
Drill the mounting holes accordingly.
Drill the wire access holes, deburr and feed the wire through.
Make and test all necessary connections.
Secure the beacon onto the mounting surface with mounting bolts.

Note: Dual colour beacon should be wired through a changeover relay/switch, so either the red or yellow wire are powered – not both.

INSTALLATION – VACUUM MAGNETIC BASE

Position lamp on a suitable surface and push the lamp down to engage the vacuum mount
Insert cigarette plug in to a suitable socket
Operate the beacon via the switch on the cigarette plug
Do not exceed 120KM/H

INSTALLATION – FIXED DIN AND FLEXIBLE DIN MOUNT

Position pipe mount connecting piece on a suitable surface and secure (Use part number P-85491 – sold separately)
Insert lamp into pipe mount connecting piece and secure by tightening the wing nut located on the lamp

LED	6x5W	Width	154mm / 6.06″
Housing Material	Aluminium Base	Height	139mm / 5.47″
Lens Material	Polycarbonate	Depth	154mm / 6.06″
Mounting	3-Bolt Flange	PCD	130mm I 5.12″
Operating Temp.	– 22°F – 176°F

(-30°C – + 80°C}

| Shock/Vibration| ISO 16750-3,

IEC 60068-2-64

Warranty items will be replaced or repaired to working condition and returned without cosmetic alterations.
Proof of purchase is required to validate all warranty claims. The warranty period is valid starting from the original date of purchase.
All products must have been purchased through a Vision X Authorized Dealer/Reseller to be eligible for warranty.
Damage resulting from any improper installation, accident, abuse, neglect or normal wear are not covered under warranty.
Any product used in mining applications is warranted for one year only.
Actions that void the warranty include:
- Opening of the lighting fixture
- Cutting any connectors or cords
- Broken Glass
- Damage caused by physical abuse
- Lights operated in environments outside their stated specifications*
All customer warranties should be handled through the Dealer/Reseller the product was originally purchased from. The customer is responsible for delivery to the Vision X Returns in Auburn, Washington.
If a product is deemed not covered under warranty, the customer will be responsible for the return shipping charges.
Items not covered under warranty can be repaired at the customer’s expense for parts and labor, at the discretion of Vision X Lighting, who will provide an estimated repair cost before proceeding with the repair.