JBL TUNE 125 Wireless Headset User Guide

June 7, 2024
JBL

logo

JBL TUNE 125 Wireless Headset

product

WHAT’S IN THE BOX

Box

how to wear

Wear

First time use

image

power on & connect

image 2

Pairing

image 3

power off

image 4

Manual Controls

image 5

BUTTON COMMAND

image 6

Charging

image 7

led behaviors

image 8

TECH SPEC

Driver size:  5.8 mm Dynamic driver
Frequency response:  20 Hz – 20 kHz
Sensitivity:  96 dB SPL @ 1 kHz 1 mW
Maximum SPL:  96 dB
Microphone sensitivity:  – 38 dBV / Pa @ 1 kHz
Impedance:  14 ohm
Bluetooth transmitted power:  < 12 dBm
Bluetooth transmitted modulation:  GFSK, Π/4 DQPSK, 8DPSK
Bluetooth frequency:  2.402 GHz – 2.480 GHz
Bluetooth profile version:  A2DP 1.3, AVRCP 1.5, HFP V1.7
Bluetooth version:  5.0
Headset battery type:  Lithium-ion battery (85 mAh / 3.7 V DC)
Charging case battery type:  Lithium-ion battery (850 mAh / 3.7 V DC)
Power supply:  5 V 1.0 A
Charging time (headset & charging case):  < 2 hrs from empty
Music playtime with BT on:  8 hrs
Weight:  73 g

IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC:6132A-TUNE125TWS) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.23171W/kg.The device was tested for typical bodily operations where the product was kept 5 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user›s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.

Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user›s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC:6132A-TUNE125TWSlogo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals