Grandstream GUV3005 USB Corded Headset User Manual

: June 7, 2024
: GRANDSTREAM

Table of Contents

Headset Components
Button and lights
Using Your Headset
Left or Right Wearing Style
Adjust the Headband
Position the Microphone
How to Use the Headset Controller
Turn on/off microphone AGC
U.S FCC Part 15 Regularly Information
Precautions
Contact Us
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Grandstream GUV3005 USB Corded Headset User Manual

GUV3005

Headset Components

Receiver
Adjustable headband
Busy light indicator
Flexible microphone boom
Noise-canceling microphone
Headset cable
Controller
USB

Button and lights

Mute microphone indicator
Mute microphone
Volume control
Answer/End button
Off-Hook indicator

Using Your Headset

Connect your GUV3005 Headset to a free USB port on your PC.
Make sure that the headset has been selected as the standard audio device in the system control audio settings.
Check whether you need to adjust these settings to use a headset.

Left or Right Wearing Style

The GUV3005 can be worn on the left or right by flipping the microphone to the other side (235° limit).
To change ears, rotate the microphone boom over the headband to accommodate the left or right ear.

Left or Right Wearing Style

Adjust the Headband

Place the headset receiver to your ears. Adjust the headband until it is comfortable, ideally ensuring that there is virtually no pressure felt on the ears.

Position the Microphone

How to Use the Headset Controller

ICON	FUNCTION	ACTION / STATUS
Answer/End call	Tap the Answer/End button
Adjust volume	Tap the Volume up or Volume down button
Mute the microphone	Tap the mute microphone button
Call light on/off	Tap the Answer/End button, Blue light on
Busy light indicator	When available, Green light on. Tap the Answer/End

button, Red light on.
| Mute on/off| When mute, Red light on

Turn on/off microphone AGC

For better user experience,you may enable/disable AGC (Audio Gain Control), follow below instructions for Windows

Access “Sound Control Panel”.
Go to “Recording” tab and double click on “GUV3005”.
Access to “Custom” tab and check/uncheck AGC, to enable/ disable AGC.

U.S FCC Part 15 Regularly Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Precautions

Always store the headset with the power off and safely protected.
Avoid storage at extreme temperatures (above 25° C/77°F or below -20°C/-4°F). This may adversely affect the headset.