BLAUPUNKT Car Multimedia Barcelona 240 Installation Guide
- June 7, 2024
- Blaupunkt
Table of Contents
CAR MULTIMEDIA
BARCELONA 240
Enjoy it.
Operating and Installation
CAUTIONS
Safety Notes
This car radio has been manufactured according to established safety
guidelines. However, dangers may still occur if the safety notes in this
manual are not observed. This manual is intended to familiarize the user with
the car radio’s important functions. Read this carefully, prior to using the
car radio. Keep this manual in an easily accessible location. In addition, do
observe the instructions of the devices used in conjunction with this car
radio.
Road Safety
Always observe the following notes for road safety:
- Car radio must be used in a way that compliments the safety of the user when driving the vehicle. It is recommended for the user to park at an appropriate location when operating the car radio. While driving, the user is not recommended to use applications that can be prone to distraction e.g. streaming to media, etc.
- Radios with Navigation: The user is recommended to proceed with proposed driving routes only if it does not violate any traffic regulations. Local traffic signs and regulations always prevail over the routes proposed.
- The user is advised to keep the volume of the car radio to a moderate level for the protection of the ears and to increase the ability to hear any emergency warning signals (e.g. police and ambulance sirens). Do not increase the car radio volume while the car radio is muted as it is not audible. The car radio volume can be too loud when the car radio is unmuted
General Safety Notes:
Observe the following Tor protection against injuries:
-
This car radio is intended for installation and operation in a vehicle with a 12V vehicle system outage, hence the radio unit must be installed in a DIN slot. Observe the output limits of the car radio. Do not dismantle or modify the car radio.
Installation and repairs, if necessary, should be performed by a specialist. We are not liable for any loss or damage caused or resulting from unauthorized disassembly or modification of the product. -
This car radio’s core components may result to damage when the car is driven on bumpy roads for a prolonged period of time or if it is used to play non-standard or severely damaged discs.
-
Please do not operate the car radio under extreme temperature conditions (extremely high temperature or extremely low temperature); make sure that temperature within the car ranges from -20°C to 80°C before you connect the car radio to the power supply
-
For abnormalities, please refer to the ‘Troubleshooting’ section. if the problem cannot be resolved. please press the Reset button to recover its factory settings. Otherwise, please contact the respective installer/seller directly for help.
-
As SO/USB file formats, codecs, bitrate, resolution, and other parameters available in the market are not all the same, there is no guarantee that this car radio can play all media file formats.
-
Different cars may have different configurations. It is normal that some CAN-Bus functions cannot be enabled because it is not supported by the user’s car or this car radio.
-
Solvents, cleaning and scouring agents as well as dashboard spray and plastics care products may contain materials that can damage the surface and screen of the car radio. Use only a dry or slightly moistened cloth to clean the car radio surface and screen.
This manual may be updated from time to time without any notice.
Disclaimer
In no event shall Blaupunkt be liable for any direct. indirect, punitive,
incidental, special consequential damages to property or life and whatsoever
arising out of or connected with the use or misuse of our products.
USA & CANADA. This product is not intended for sale in the United States and
Canada. If purchased in the U.S. or Canada, this product is purchased on an
as-is basis. No warranty, whether expressed or implied is provided in the U.S
or Canada
CAUTIONS
Disposal Notes
Do not dispose of your old unit in the household trash! Use the return and
collection systems available to dispose of the old device.
Radios with Detachable Panel – Damage to the control panel
- Never drop the control panel.
- Transport the control panel so that it is protected against impacts and the contacts cannot become dirty.
- Do not expose the control panel to direct sunlight or another heat source.
- Avoid direct skin contact
Scope of Delivery
- Car radio
- Operating / installation instructions
- Remote control (include battery)
- Connecting cable
- installation keys
- Trim ring
- Mounting bar
KEY FUNCTIONS
-
• Radio mode: Press to decrease radiofrequency manually. Press and hold to decrease radiofrequency automatically
• Phone (BTI mode: Press to return to the beginning of the current song
• Playback mode: Press to skip to the previous track/ chapter. Press & hold to fast reverse current track. -
Press to turn on or off
-
• Radio mode: Press to increase radio frequency manually. Press and hold to increase radio frequency automatically
• Phone (ESTI mode: Press to skip to next song.
• Playback mode: Press to skip to the next track/chapter. Press & hold to fast forward current track. -
Press to mute or unmute
-
Radio mode: Press Automatic Memory Storing to run one cycle of radiofrequency and automatically save the strong signal stations in the preset buttons
-
Turn knob left / right to decrease / increase volume
-
Menu Button: Press to enter the setting. Press again to select BAS-TRE-BAL-FAD-EQ-LOUD-LOC-STEREO. turn knob to adjust
– BAS: Bass
– THE: Treble
– GAL: Balance
– EQ (Equalizer): Flat/Pop/Rock/Classic
-LOUD
-LOC: Switch between Local (reduce receiving sensitivity when searching stations) or Remote (receive weak stations signal) searching.
– STEREO: Switch between Stereo or Mono -
LCD Display
-
Disc slot
-
IR
-
Eject
-
US8
-
Aux-in
-
SD
-
• Radio mode: Use digit to select a radio station or press and hold to save the station
• Playback mode: Press to skip to the next 10th song or press and hold to skip to the next folder -
Radio mode: Use digit to select radio station press and hold to save the station
• Playback mode Press to skip to the previous 10th song or press and hold to skip to the previous folder -
• Radio mode: Use digit to select a radio station or press and hold to save the station
• Playback mode Press to turn on or off shuffle play
• External screen Repeat press and hold step, to shift from one folder to another -
• Radio mode: Use digit to select a radio station or press and hold to save the station
• Playback mode: Press to repeat 1 /All
• External screen Repeat press and hold step, to shift from one folder to another -
• Radio mode: Use digit to select a radio station or press and hold to save the station
• Playback mode: Press to play the first 10 sec of each track
• External screen. Repeat press and hold step. to
• move the selection downwards -
Microphone
-
• Radio mode: Use digit to select a radio station or press and hold to save the station
• Playback./BT mode : Pause/Play
• External screen Repeat press and hold step, to
• move the selection upwards -
• Radio mode Press to select radio band FM1-FM2- FM3-AM1-AM2. Press and hold for automatic radio stations scan and save
• Playback mode. Press to enter manual selection
• Press to accept the call -
• Press to switch between media RADIO-PHONE-DISC-USB-SD-AUXIN
• Press and hold for clock setting
• Press to end the call
REMOTE CONTROL
-
Press TO switch between MODE Padre-US8 – CARD – DUD
-
Press to turn on cr press and hold to turn off
-
Mute
-
• Title mode: Press to go to a title (media files setting)
• Playback control mode: Press to go to the main menu (stile( t to merit,’ files setting) -
Up button
-
Press to go to the main menu
-
Press to Enter to select the preferred option
-
Left button
-
Down button
-
Press to adjust car audio’s surround system (Mono. Stereo) according to preference
-
Press to rewind search
-
Increase volume
-
Press to go to the previous track/ chapter
-
Decrease volume
-
Press to eject a DVD/CD
-
Press to repeat a track/ chapter
-
Press to go to setting 18 Right button
-
Play/pause 20 Press for quick forward search
-
Press to go to the next track/ chapter
**BLUETOOTH
**
Pre-pair Bluetooth
- Ensure mobile phone supports Bluetooth function before pairing. The different mobile phones will have different emissive power. To get the best connection, the recommended distance range is 3m without any object obstruction.
Pairing
- Turn on the mobile phone’s Bluetooth to set up. (Please refer to the instruction manual of the mobile phone on how to operate Bluetooth) “BARCELONA 240” should appear on your available Bluetooth scanning list. Select “BARCELONA 240”. Pairing is successful when the phone’s Paired Device list appears as “Connected” under BARCELONA 240.
OPERATION
GENERAL
Power supply:10 8: 16VDC
Current consumption: max. 8 A
Maximum power output: 4 x 50W channels (max)
Dimension: (WxDxF0 .178 x 170 x 45mm
Weight: 1 15kg
Operation temperature: 20º∼60º
FM Stereo Radio
Frequency range: 87.5 – 108MHz
Preset memory stations: 18
AM/MW Radio
Frequency range: 522 -1620 MHz
Preset memory stations: 12
Audio Specification
Frequency response: 15HZ-15KHZ – 3d8
Input
DVD/l.158 2.0 / microSD.: Audio :AAOMP3/VVAV/WMA Video:
AVI/DAT/M2V/MPE/DIVX/MPEG/MPG Image : ‘PEG, JPG.
Aux in: 3.5mm jack
External microphone: Ready
Bluetooth
Profile 4.0+ FOR: A2DP, HFP,rSAP
Problems | Possible Causes | Solutions |
---|---|---|
Unable to startup | The car key is not inserted into the ignition; the ignition | |
Is off | I Insert the car key and turn on the Ignition. | |
Power Cable Is not inserted into the main body. | Insert the power cable | |
Burnt power fuse. | Replace it with a new fuse. | |
Drained car battery. | Charge or replace the car battery. | |
No sound | Audio cables are not properly | Ensure proper connection of the audio |
cables
connected to the unit.|
The mute setting is on.| Unmute the volume.
low volume.| Adjust the volume.
No sound from the front, rear, left & right| Select Equalizer from Home Page
to adjust the setting.
speakers due to Fade-Balance settings.|
Dim screen or black-&-white screen while playing video| Brightness, contrast
ratio, and color values are excessively adjusted.| Ensure brightness, color,
and contrast ratio values are in the normal range.
Slow in SO card reading| The pixel of the picture file exceeds this system’s
capacity.| Replace it with a new audio/video SD card with I-compatible file
formats.
SD cards may contain corrupted files or viruses.
No rear-view reverse image| The rear camera is not appropriately connected
with the power supply.| Examine the camera’s power supply connector.
The camera’s signal line is not plugged in.| Insert the camera’s signal line
into the interface of this port unit.
Unable to search radio stations| The radio’s antenna is not well inserted.|
Ensure the radio antenna is properly installed.
Unable to play the Disc| The Disc is not inserted properly.| Re-insert the
Disc and ensure the orientation is correct.
The Disc is scratched distorted or stained.| Replace It with a functioning
disc.
Unable to read files.| Ensure media files are supported by this unit.
WIRING DIAGRAM
INSTALLATION INSTRUCTION
SAFETY
- Assign a mounting location that will not obstruct the driver in any circumstances. Or cause injuries to drivers and passengers in case emergency brake or accidents
- Ensure all wires are connected properly, and that the unit IS functioning well before fitting the unit into the mount.
- Any unauthorized installation and modification may cause malfunction to the unit. Always use the parts that are included with the units only
CAUTION
- Disconnect the negative terminal of the battery (Refer to vehicle manufacturer’s safety instructions). Be wary to not damage vehicle components when drilling holes.
- Make sure you do not damage vehicle components when drilling any holes.
- The cross-sections of the positive and negative cables must not be less than I 5 mm2.
- Do not connect the vehicle’s plug connectors to the radio!
- Your vehicle may differ from the description provided here. Blaupunkt is not liable in case any damage caused by incorrect installation or connection
- Please contact Blaupunkt dealers or vehicle’s manufacturers if the information provided here does not fit your specific installation requirement
When installing an amplifier, first connect the device ground connections before connecting the plugs for the line-out jacks. The ground connection of external devices may not be connected to the ground of the car sound system (housing.
Supplied mounting hardware
|
---|---
|
---|---
|
DISMANTLE INSTRUCTION
|
---|---
|
https://www.facebook.com/blaupunkt.asia
Designed and engineered by Blaupunkt Competence Center
1 103 19 005 29 01
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>