Lexi Wall Hung and Floor Mount User Guide

Lexi Wall Hung and Floor Mount User Guide

Features

• Wall Hung and Floor Mount
• 304 grade stainless steel frame, fabricated in Australia and finished in Matte Black or Matte White powdercoat
• ADP Deluxe soft-close drawers in Graphite with LED illuminated glass sides
• Premium graphite interior, soft-close doors.

Cabinet Finish Options

• Woodgrain
• Polyurethane
  See page 36 for finishes

Metal Frame Finish Options

• Matte Black powdercoat
  

• Matte White powdercoat

20mm Benchtop Options

• Cherry Pie Premium Solid Surface
• Friday Hybrid Quartz
• Caesarstone (additional charges apply)
  See page 42 for finishes

1. Universal Plug & Waste included

2. 3L Bin included
   

3. Australian Made

Handle Options

Point Knobs
Brushed Nickel, Matte Black, Brushed Brass

Reign Knobs
Brushed Nickel, Matte Black, Brushed Brass

Loop Leather Pull
Black or Tan

Margot Basin (Included)

For codes and specifications see page 56

• Matte or Gloss White

• Matte Black

• Matte White Inside, Matte Black Outisde

• Matte Black Inside, Matte White Outisde

• Matte White Inside, Matte Grey Outisde

• Matte White Inside, Matte Pink Outisde

Configurations – Wall Hung

For codes and specifications see page 50

• 600 Centre Bowl

• 750 Centre/Offset Bowl

• 900 Centre/Offset Bowl
  

• 1200 Centre/Offset Bowl

Configurations – Floor Mount

For codes and specifications see page 50

• 600 Centre Bowl
  

• 750 Centre/Offset Bow
  

• 900 Centre/Offset Bowl
  

• 1200 Centre/Offset Bowl
  

Product Specifications

Lexi Wall Hung

• 600 Centre
  LEXFDW0600WHC
  

• 750 Centre
  LEXFDW0750WHC
  

• 750 Offset
  LEXFDW0750WHL
  LEXFDW0750WHR
  

• End View
  

• 900 Centre
  LEXFDW0900WHC

• 900 Offset
  LEXFDW0900WHL
  LEXFDW0900WHR
  

• 1200 Centre/Offset
  LEXFDW1200WHC
  LEXFDW1200WHL
  LEXFDW1200WHR
  

• 600 Centre
  LEXFDW0600FMC
  

• 750 Centre
  LEXFDW0750FMC
  

• 750 Offset
  LEXFDW0750FML
  LEXFDW0750FMR
  

• End View
  

• 900 Centre
  LEXFDW0900FMC
  

• 900 Offset
  LEXFDW0900FML
  LEXFDW0900FMR

• 1200 Centre/Offset
  LEXFDW1200FML
  LEXFDW1200FMC
  LEXFDW1200FMR
  

Hudson

Holly Wall Hung

Basin Specifications

Margot

Features

1. Above-Counter
2. Ceramic
3. 9L Capacity
4. No overflow
5. Suits a 32mm waste

Finishes

• Matte White
  TOPCMAR360MW

• Gloss White
  TOPCMAR360GW

• Matte Black
  TOPCMAR360MB

• Matte Black Outside/ Matte White Inside
  TOPCMAR360BW

• Matte White Outside/ Matte Black Inside
  TOPCMAR360WB

• Matte Grey Outside/ Matte White Inside
  TOPCMAR360DGW

• Matte Pink Outside/ Matte White Inside
  TOPCMAR360DPW

Joy

Features

• Semi-Inset
• Solid Surface
• 3L Capacity
• No overflow
• Suits a 32mm waste

Finishes

• Matte White
  TOPSJOY2819WM

• Gloss White
  TOPSJOY2819WG

WARRANTY

NOTE: Unless otherwise stated warranties for ADP products are as follows:

Cabinets – Vanities, Tallboys & Ensembles, Shaving Cabinets (excluding mirror)| 10 years| 1 year
Cherry Pie / Friday Hybrid Quartz / Caesarstone benchtops| 10 years| 1 year
Acrylic Tops / Cast Marble Tops / Solid Surface Tops| 7 years| 1 year
Ceramic Moulded Tops| 5 years| 1 year
Solid Surface Basins| 7 years| 1 year
Ceramic Basins| 1 year| 1 year
Baths| 7 years| 1 year
Mirrors (including mirrored surfaces on cabinets)| 1 year| 1 year
Hardware| 7 years| 1 year
Electrical / Lighting / Plumbing Fittings| 1 year| 1 year

Tapware

Cartridge| 15 years| 1 year
Body (against manufacturing faults and flaking)| 7 years| 1 year
Martini Ritz body (against faults and flaking)| 1 year| 1 year
Parts and Labour| 2 years| 1 year
Bathroom Accessories| 7 years| 1 year

Our products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure upon inspection by an authorised representative where a product is found to be defective in construction, material or assembly. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure, free of charge.

CONDITIONS

1. Items must be installed by a licensed tradesperson.
2. Failure is due to a fault in the manufacture of the product.
3. Proof of purchase is provided.
4. The installation of the product is in accordance with the instructions provided.

EXCLUSIONS
To the fullest extent permitted by law, the manufacturer excludes all liability for damage or injury to any person, damage to any property and any indirect consequential or other loss or damage. Manufacturer will not be liable for the cost of installation or removal of any unit and the warranty will be VOIDED if damage occurred during or after INSTALLATION or a damaged or incorrect unit has been installed. Door and drawer adjustment; Unsuitable or improper use; Incorrect installation or installation not in accordance with the instructions  provided; Installation or part installation by the purchaser or any person other than a LICENSED tradesperson; Normal wear and tear; Inadequate or complete lack of maintenance; chemical, electrochemical or electrical influences; excessive heat damage or Harsh detergents or abrasive cleaners used on product finishes, are NOT considered a warranty issue. Acrylic, Ceramic, Solid Surface and Bamboo basins and tops have a maximum water temperature of 65°C, Cast Marble has a maximum water temperature of 70°C, water temperatures above this will void warranty.

CLAIM PROCEDURE
For all warranty queries customers are to contact the branch where the product was purchased. These details can be found on your purchase invoice.

AN IMPORTANT NOTE ON BATHROOM VENTILATION

Good ventilation will save you thousands of dollars and keep your family healthy – mould can be a huge problem in bathrooms if they’re not properly ventilated.

Moisture can be the root of all wet area products breaking down and failing, in particular your vanity and mirror. These products are usually water resistant not waterproof so it’s important moisture does not build up which will mean your products will last longer, saving you money. Good ventilation is also key to achieve lower humidity in the room which will minimise bacteria growth and prevent mould and mildew. You’ll have less mildew on your grout, walls and ceilings, and fewer mould spores to threaten your respiratory health.

Signs of poor ventilation include black spotting on mirrors, paint starting to flake on the ceiling, bubbling of paint coatings on fixtures, and furniture swelling. Evidence of mould or mildew is also a good indicator that your ventilation is not adequate.

The best sign that your ventilation is sufficient is that the mirror doesn’t steam up and the tiled walls aren’t wet. The best way to achieve this is to have a good exhaust fan that is correctly sized for the space, to do this you need approximately 50 cfm per toilet and 50cfm per shower or bath. Run the fan every time water is being used in the bathroom and run it for around 15 minutes after you shower. If you have a bathroom window, opening that daily (even in the chilly winter months) in addition to using the exhaust fan will help to keep your bathroom fresh and mould-free.

References

• Architectural Designer Products | ADP

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>