Lexi 2ATOT40005 Smart Air Quality Monitor User Manual
- June 5, 2024
- Lexi
Table of Contents
Lexi 2ATOT40005 Smart Air Quality Monitor
WELCOME TO LEXI
USER GUIDE-WORK WITHOUT LEXI HUB
- Please select the ENVIRONMENT (NO HUB) mode at the menu of LEXI App by selecting “Add Environment/Hub
- Make sure your mobile’s WiFi is turned on and connected to 2.4G band and turned on the location.
- Power on your Air Quality Monitor. Then, press and hold the WiFi Button for 3-5 seconds unfil you see the LED flashing green ight.
- Select ADD NEW DEVICE at the LEXI APp and follow the instruction to complete adding the devicels]. In the pairing process. you will see the fast finishing Green light. Once it is connected. the light will turn Green without fiashing.
- Your device is added to the LEXI system successfully and ready to use.
- To learn more about detailed functions and special effects, please go to www.lexlife io
USER GUIDE- WORK WITH LEXI HUB
- if you are using a LEXI Hub, make sure its powered on and connected to the internet, Also, make sure your LEXI Hub is ready to add a device|s) and work property with the LEXI App at your smart devices,. [ Detail instruction at the User Manual of LEXI Hub]
- Make sure your mobile’s Wifi is turned on and connected to 2.4G band and turned on the location,
- Power on your Air Quality Monitor. Then, press and hold the Wifi Button for 3-5 seconds until you see the LED flashing green light.
- Select”ADD NEW DEVICE” at the LEXI App and follow the instruction to complete adding the devices). In the pairing process. you will see the fast flashing Green light. Once it is connected, it will turn Green without flashing.
- Your device is added to the LEXI system successfully and ready to use.
- To learn more about detail functions and special effect, Please go to www.lexilife.io
FEATURE
- PM 2.5 Detection hole
- Ventilation Hole
- High Formaldehyde indication
- Network Status indication
- Micro US8 power socket
- WiFi Connection Button
WARNINGS AND CAUTIONS
-
Do NOT Use near a blowing fan at any location with high wind flow, if caUse inconsistent measurements, resulting in income values.
-
Do NOT cover the ventilation holes by hand, as the sweat contains formaldehyde-like substances which will cause a fault on the measurement.
WARNINGS AND CAUTIONS: -
If the room has perfume, alcohol, smoke smell, and toilet odor, it will release the gases with a similar formaldehyde chemical structure and cause a higher formaldehyde value. It will also be a signal for you to alert some abnormal gases releasing at your room
-
Do not place the device at areas with soot ash, vapor, and a high-concentration chemical pollution environment; it will cause some damage to the sensor.
-
Do NOT put the device at a place out of the range of 41-104°F and humidity 30-80%
-
The product is for indoor use only. Do NOT be directly expose to water, rain, sunlight, hot surface, and outdoors.
-
This product is not a toy designed to be played with by children,
-
For safety reasons and under the terms of the warranty, none of the enclosed devices should be opened
-
Only use the adapter with a rating at DC5V 1 2A. if using a different rating’s adapter can damage the product.
WARRANTY:
LEXI provided a one-year warranty is valid if the product is used in
accordance with the instructions and for its intended purpose.
Claims will only be accepted on submission of the original proof of purchase
invoice, sales slip or receipt) stating the purchase date, the name of the
dealer and a description of the product with product ID labeled at the
products. or Instruction manual. The LEXI’s warranty lapses it:
- Anything has been changed. crossed out. deleted or rendered illegible on the purchase docket or product description.
- The failure is caused by damage. faulty connections or abuse.
- A defect is caused by extreme circumstances not inherent to the product. for example. lightning. flooding. fire. incorrect use or negligence.
- The product has been opened or disassembled.
TROUBLESHOOTING
- Ensure your device s within 60ft without an obstacle between either your LEXI Hub or your moble phone when being used without a Hub)
- Ensure your mobile phone has turned on both WiFi (2.4G band) and location services.
- Make sure the green light is not flashing. The flashing green ight means the connection with WiFi is not success. Please re-connect the device with WiF.
- Confirm the device is paired with LEXI Hub or with your mobile phone
- You can un-pair the device by LEXI App when necessary.
- you feel the measurement of data has something abnormal. You can do a Zero calibration” by select this function at LEXI App.
Then. simply put the Air Quality monitor close to the window with good ventilation for 15 minutes.
WIRELESS SPECIFICATION
- Frequency: 2400-2484MHz
- Wireless communication protocol:
- 802.11b/802.11g/802.11In
ENVIRONMENTAL SPECIFICATION:
- Temperature (operation): 41-104°F
- Temperature (storage: 13. 1 40PF Relative
- humidity: 30-80% non-condensing
CLEANING AND MAINTENANCE:
Do not clean when the product is on and connected to mains power. To avoid
scratching. the product should only be cleaned with a soft dry cloth. Do not
use cleaning agents.
PLEASE KEEP THIS PACKAGING FOR FUTURE REFERENCE AS IT CONTAINS IMPORTANT
INFORMATION.
DISPOSAL OF YOUR OLD PRODUCT
Your product s designed and manufactured with high-quality materials and
components. which can be recycled and reused. When this crossed-out wheeled
bin symbol is
attached to a product it means the product is covered by the European
Directive 2002/96/EC Please find out for yourself about the local separate
collection system for electrical and electronic products. Please act according
to your local rules and do not dispose of your old products with your normal
household waste. The correct disposal of your old product wi help prevent
potential negative consequences for the environment and human health.
FCC WARNING AND CAUTION
This device comples with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmtul interference. and
- this device must accept any interference received. including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC ID: 2ATOT40005
Shielded Cables must be used with this unit to ensure compliance with the
Class BFCC limits
NOTE: This equipment hoas been tested and found to comply with the imits
for a Class BB digital device. pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
NOTE:
This equipment generates, uses and can radiate radio frequency energy and, it
not installed and used in accordance with the instructions, may cause harmful
interference
to radio communications. However. there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: () this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part l5 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
f this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receive
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter
RF Exposure Statement
To maintain compliance with FCC’s RE Exposure guidelines, This equipment
should be installed and operated with a minimum distance of 20m from the
radiator of your body. This device and its antenna(s) must not be co-located
or operated in conjunction with any other antenna or transmitter