ULINE Shelf Bin Orgsnozer 39″ Tall Installation Guide
- June 7, 2024
- ULINE
Table of Contents
SHELF BIN ORGANIZER
39″ TALL
TOOLS NEEDED
PARTS
ASSEMBLY
-
Install Side Braces:
For 12″ deep units, attach side braces to the longer side of the posts. From the bottom up, locate the 4th hole. From the top down, locate the 3rd hole. Insert bolts through side braces and posts. Tighten bolts with nuts. (See Figure 1)
For 18″ deep units, attach side braces to the longer side of the posts. From the bottom up, locate the 4th hole. From the top down, locate the 6th hole. Insert bolts through side braces and posts. Tighten bolts with nuts. (See Figure 1)
-
Install Back Braces:
For 12″ and 18″ deep units, attach back braces to the shorter side of the posts. From the bottom up, locate the 12th hole. From the top down, locate the 10th hole. Insert bolts through back braces and posts. Tighten bolts with nuts. (See Figure 2)
-
Install Bottom Shelf:
For 12″ and 18″ deep units, align shelf with third hole up from bottom. Insert bolt through the shorter side of the post and through the shelf. Tighten bolts with nuts. (See Figure 3)
NOTE: Shelf bolts should be facing the front and back of the unit.
-
Install Top Shelf:
For 12″ and 18″ deep units, align shelf with top hole. Insert bolts through the shorter side of the post and through the shelf. Tighten bolts with nuts. (See Figure 4) -
Install Remaining Shelves:
For 12″ and 18″ deep units, stand the unit up. Insert remaining shelves every sixth hole to evenly distribute. Tighten all bolts using wrench. (See Figure 5)
1-800-295-5510
uline.com
0621 IH-2510