ULINE H-6546 Industrial LED Magnifier User Guide
- June 7, 2024
- ULINE
Table of Contents
ULINE H-6546 Industrial LED Magnifier
INSTALLATION
-
Locate and remove clamp from packaging.
-
Use screw mechanism to open clamp to the thickness of the desired mounting surface.
-
Slide clamp onto desired mounting surface and tighten screw mechanism. (See Figure 1)
NOTE: Clamp must be tightened completely before attaching lamp. -
Remove lamp from packaging.
CAUTION! Use both hands to hold lamp arms closed when removing packaging. Open arms slowly and carefully. -
Lower stem of lamp into hole in clamp. (See Figure 2)
-
Insert plug into properly rated 120V outlet.
-
Insert other end of plug into base of lamp.(See Figure 3)
OPERATION
- Adjust magnifier head to desired position. Tighten adjustment knob to secure head tilt. To lock side to side movement, use 4 mm Allen wrench to tighten bolt on head. (See Figure 4)
- Lift the magnifier cover and use control pad to operate LED lights.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>