PYLE PLINTBL10 0.1-inch Double DIN Car Stereo Receiver User Guide
- June 7, 2024
- Pyle
Table of Contents
PYLE PLINTBL10 0.1-inch Double DIN Car
_ **Stereo Receiver User Guide**_
Note: This unit is based on Android platform. Besides the standard Apps we provided with the unit, you can also download thousands of Apps and install it on our platform. Please kindly note NOT all Apps are compatible with this platform. If you have any compatibility problem with a 3rd party App, please contact your App provider. For the operation instruction of a certain 3rd party App, please also contact your App provider. We are not responsible for any problem with your 3rd party Apps.
To enjoy the unit’s features, along with proper and safe operation, please be sure to read through this manual before use. It is especially important to thoroughly understand and follow all system warnings and precautions. Keep the manual in a safe location for future reference when necessary. Contact your dealer or the nearest authorized repair center for any service, repair or technical support assistance.
Note:
We are constantly aiming to improve the customer experience and your
receiver’s features and specifications are continually changing for the
better, with improvements to the user interface experience, software updates,
bug fixes, etc. System descriptions and features reflected as herein stated by
this user manual serves to express our Headhunt Receiver features at the
current production period. We reserve the right to change terms and conditions
of system specifications, features and descriptions at any time, as we
continue to improve and provide our customers with upgrades in safety,
performance and system operation in general.
System Installation:
Before starting: To prevent short circuits, be sure to disconnect the battery terminal before starting.
Installation Guide
Caution:
- Consult your vehicle dealership before making any modifications to your car’s body (ex. Drilling holes)
- Use included screws in installation. Improper operation may damage machine or cause accidents.
Do not install unit in any area where:
- It may obstruct the steering wheel and gearshift lever operations
- It may obstruct the operation of safety devices such as air bags
- It may obstruct visibility
Front Panel and Buttons
Button & Feature Layout
Turning Power On
- Turn on the engine key to the “ACC” or “ON” position
- Press and hold the power button for 3 seconds
• When the engine key is turned to off position, the unit Status Bar is turned off (on the top of radio screen and app screen) you can swipe down for more.
App Screen – Interface Layout
Swipe UP/DOWN to access more apps
Navigation
Click the main interface “navigation” to enter the navigation interface. If the memory card does not have map data, it will prompt download and enter the map management interface after confirming.
Clicking icon description
- Map download: Click the top left corner, ” ” then click offline data, and then click on the offline map, select the city map data you need to download.
- Download Management: Download all or pause, also you can click the city to cancel or pause the download.
- Download Manager: You can update all apps, click the city to select “delete data” or “update”. Top left corner, “← ” Return to the previous level interface.
Local music
Click the main interface “music” to enter the local music interface. This
operation is valid when the unit has a SD card or USB interface and the
corresponding media files.
Online music
Click on the main interface “online music” to enter the online music
interface. Need to connect to the internet.
Music player button function description
Video playback
Click “Video Player” to enter the video player interface (supports 1080P HD
video). This operation is valid when the unit has a SD card or USB interface
and the corresponding media files. Click the “All icon” to switch between
All/SD/U Disk/File Browser. When the video file is read, the system
automatically plays the file that has not been played last time the video
player is opened again.
Clicking icon description
Calendar
Displays the day, month and year. Use forward and back arrows the view past or
future months. Selected dates are highlighted in blue.
Radio
Click the main interface “radio” to enter the local radio Clicking icon
description interface (FM / AM band can store 40 effective platforms each)
Wireless BT
Click the main interface “Bluetooth®” to enter the Wireless BT connection
interface.
When the BT is not connected: Enter the Wireless BT interface, there is
no BT connection device displayed. Click the Wireless BT interface, such as
the dial key, you will be prompted “ Please connect HFP. ”
EQ – Equalizer
Phone Link APP
For the detailed operation instruction for Phone Link, please follow the
instruction on actual unit.
Third Party Apps
For the detailed operation instruction for a certain 3rd party App, such as
Google map, YouTube etc., please contact your 3rd party App provider for
further service.
Steering wheel learning
Steering wheel learning steps are as follows:
- Press any key on the steering wheel, the interface will display “please long-press and hold a direction key”, without pressing the steering wheel button for a certain period of time will lead to failure.
- Click on the screen to access docking function
- Press the corresponding function button on the steering wheel. Follow the steps 1 – 3 until all control buttons on the steering wheel is finished.
Note: Click “ ” will reset all the saved keys. If you perform a “System Reset” operation in “Factory Mode Settings”, please resave the steering wheel before using again.
The realization of this feature:
- For non-bus control of the original car steering wheel.
- The original car steering wheel keys need to be voltage input control.
Brightness setting: Click the “+” or ” – ” icon to adjust the value.
Volume settings: Slide the button directly to adjust the media volume and
call volume.
GPS monitoring: View related GPS information, click “ ” to restart GPS.
Sound settings
- Click the slider to adjust Subwoofer, bass, midrange, treble.
- Settings can be made in Rock/Custom/Classic/Jazz/Pop by clicking the corresponding icon.
- Click the upper right comer of the speaker to ” ◀▶▲▼” et four icons or dick the center dot to adjust the speaker position settings.
- Click the “default” icon will restore the sound settings parameters to the system default state.
Memory clean
Cleaning up memory speeds up the system.
Desktop wallpaper
According to your personal preference, you can go from “wallpaper” to “dynamic
wallpaper” the “gallery” sets the wallpaper as prompted.
WLAN (Wi-Fi settings)
Click “ ” to switch from OFF to ON. After searching for nearby
wireless Wi-Fi, select the Wi-Fi hotspot you want to connect from the list.
Enter your wireless connection password in the pop-up password box, then click
“Connect”. Enter the correct password, it will connect successfully after a
while and display “connected.”
Reset
Reset Network: This will reset all network settings, including (WLAN,
Mobile Data Network, Wireless BT)
Restore factory settings: This will restore the system to factory
settings and clear all data in your device’s memory.
Time setting
Determining the date and time automatically can be turned on, optionally using
the network or provided by GPS. If you need to adjust the time manually, it
need to be switched off, click directly to mobilize the time or date.
Determining the time zone automatically can also be opened. It can be manually
adjusted after switching off. It can also open or close the 24-hour system.
Troubleshooting
Q: Unit doesn’t power up.
A: Use a multi-meter to check for 12v+ to red and yellow wires. Check for
proper Ground on the Black wire.
Q: My video does not play.
A: Attach “PARK” wire to parking break. When this wire is grounded the
video will play (Grounding trigger of the parking brake)
Q: Reverse camera does not come up on the screen.
A: Attach “BACK UP CAMERA” wire to reverse tail light 12v+ (Make sure
camera is and sending video signal)
Q: Can I set up steering wheel control?
A: Key 1 and Key 2 wires need to be wired to your vehicle’s steering
wheel column
Q: The time I set is not saved after device reboot.
A: Are other setting saved? If not: Check that yellow memory wire is
attached to 12v+ constant
A: Turn off GPS auto update Go to radio settings > Set Time > switch off
auto update
Q: My GPS gets no reception.
A: Check if the antenna properly connected.
A: Mount Antenna directly to your vehicle (GPS antenna is to be
magnetically mounted, it will boost GPS reception when attached)
A: Check alternate antenna placement to test for interference
Q: How to I set the time?
A: System setting, set time
Q: How do I turn up GPS instruction volume (I Can’t hear it over music)
A: Change GPS sound settings Go to Navi > Settings > Sounds > Set GPS
voice level to max > Set radio volume to min (Adjust accordingly)
Q: Where can I download firmware updates?
A: This unit’s hardware does not allow it to be updated with new OS or
firmware.
Q: My BT microphone is not working as expected.
A: Check that nothing is covering microphone port.
Check to see if closer proximity to the mic affects its pickup Check that
phone connection is good Make sure the call recipient has speaker volume set
to an appropriate level Check that the mic is not picking up too much
background noise
Note: The built-in mic cannot be changed, replaced or upgraded.
Q: I am having trouble setting up Wireless BT.
A: Check that your device is Wireless BT compatible 4.0+ Check if you are
able to pair with alternate devices via Wireless BT. Clear out your device
history in your Wireless BT setting menu and attempt to pair/connect again
Q: How do I play video files? My unit cannot read my digital video files.
A: Make sure SD card is compatible
A: Check file format of your file. (You may need to convert your video
file to an alternate file format)
You have entered the ‘Touch Screen Calibration Menu’. For optimum touchscreen
performance, this feature enables you to enjoy the best functionality of your
device’s touch screen. To complete the touchscreen calibration, an “X” will
appear in the circles on the screen in numbered order, continue to press the
center of the “X” as it passes through each numbered circle.
(In circle number one, you will see an “X”, touch the center of the “X”,
then the “X” will move to circle number two. Continue to touch the center of
the “X” as it will move to the other circles in numbered order. If calibration
senses an error, the process may restart; Repeat if necessary.)
Wiring – Back Panel:
- For power cable
- For radio antenna
- For GPS antenna
1. For power cable
WIRING
- Pink wire tells the monitor when to activate and display rearview camera on the display (optional)
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>