Crystal Vision Technology CVT808N NVR System User Guide
- June 1, 2024
- Crystal Vision Technology
Table of Contents
- Crystal Vision Technology CVT808N NVR System
- Product Information
- Product Usage Instructions
- FAQ
- Confirm Your NVR Firmware Version Before Starting
- Download File from the Link
- Transfer New Firmware from Your PC to the USB Drive
- Insert Your USB Drive into Your NVR
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Crystal Vision Technology CVT808N NVR System
Product Information
Specifications:
- Model: NVR System
- Firmware Version: CVT808N Firmware Ver. 3.0.3.1 / CVT808A Firmware Ver. 3.0.3.1
- Built Time: 2019-04-29
- Monitor Model: No Monitor Model (CVT808N) / Built-In Monitor Model (CVT808A)
Product Usage Instructions
Confirm Your NVR Firmware Version Before Starting:
- Navigate to ‘System Settings’ in the NVR Menu and Click on ‘System’.
- Check the current firmware version to ensure compatibility.
Upgrading Firmware:
- Download the appropriate firmware file for your model from the provided link.
- Transfer the new firmware file to a USB drive formatted with FAT32.
- Save the firmware in the root directory of the USB drive.
- Insert the USB drive into your NVR.
- Navigate to System Setup > System > System Upgrade > Local Upgrade in Your NVR.
- Click ‘Local Upgrade’ to start the upgrade process.
- Your NVR system will reboot automatically after completing the upgrade.
FAQ
- Q: Why is it important to check the firmware version before upgrading?
- A: Checking the firmware version is essential to ensure stable system operation and compatibility with the upgrade file.
- Q: What should I do if I encounter issues during the firmware upgrade process?
- A: If you encounter any issues during the upgrade process, ensure that you have followed all the steps correctly. If problems persist, contact customer support for assistance.
Confirm Your NVR Firmware Version Before Starting
- To Confirm the Current Version
- Navigate to ‘System Settings’ in the NVR Menu and Click on ‘System’
- Only the Following Versions Can Be Upgraded
- CVT808N FIrmware Ver. 3.0.3.1 Built Time : 2019-04-29 (No Monitor Model)
- CVT808A FIrmware Ver. 3.0.3.1 Built Time : 2019-04-29 (w/Built In Monitor Model)
- Checking the firmware version is essential for stable system operation
Download File from the Link
- For CVT808A FIrmware Ver. 3.0.3.1 (w/Built In Monitor Model)
- FWHI36D_20200619_W-NVR_CVT808A_3_0_8_0_9013160200.rom
- For CVT808N FIrmware Ver. 3.0.3.1 (No Monitor Model)
- FWHI36D_20200821_W-NVR_CVT808N_3_0_8_3_9013160200.rom
Transfer New Firmware from Your PC to the USB Drive
- Format Your USB Drive with the
- FAT32 File System
- Save the Firmware in the Root
- Directory, Not in a Subdirectory.
Insert Your USB Drive into Your NVR
Navigate to System Setup > System > System Upgrade > Local Upgrade in Your NVR
- Navigate to ‘System Settings’ in the NVR Menu
- Move to the ‘System Upgrade’ in SYSTEM
- Click ‘Local Upgrade’ to Begin the Upgrade Process.
- Your NVR System Will Reboot After Completion
References
Read User Manual Online (PDF format)
Loading......