Orbic R678EL Magic 5G Smartphone User Guide

Orbic R678EL Magic 5G Smartphone

To get started, you’ll need these items included in your package:

• Activation card
• SIM tool
• Charger/ USB Type C Cable

Initial Phone Setup

Charging Battery

Before turning on your phone, charge it fully.
Insert the small end of the USB cable into the phone. Insert the larger end into the charger and plug it into an outlet.

WARNING: Only use the approved chargers with your device. Incompatible chargers or tampering with the charger port could damage and void the warranty.

Turning Phone ON/OFF

To turn ON, press and hold the Power/Lock button located on the right edge of your phone. To turn OFF, press and hold the Power/Lock button and follow the prompts.

Initial Prompts

Connect to Wi-Fi – Select and connect to a specific network; password will be needed if network is secured.
Google Services – Log in to your Google account and Google Services, select and accept Privacy Policy options.
Set Screen Lock – Select options and enter password. Option to add one or more fingerprints to unlock screen.

Set up your GoogleTM Account

Creating a New Account

Open the Google folder from the home screen and select the GMAIL application .

• Tap Add an email address, Google.
• Tap Create account and follow on screen prompts.

Adding an Email Account

• Touch the Home key > swipe up for apps > Settings > Accounts > Add Account.
• Tap the type of account you want to add.
• Follow the screen prompts to enter information about the account. Most accounts require username and password.

Accessing Google Account

Open the Google folder from the home screen and select the GMAIL application .

Settings and Notifications

Note: Settings apply to all email accounts you have set up

• Touch Home > .
• Tap  > Settings > General Settings.
• Customize based on your preferences.

Set up a Pin or Pattern

• Touch the Home key > swipe up for apps > Settings > Security > Screen lock.
• Touch None, Swipe, Pattern, PIN or Password.
• Touch None to disable screen lock.
• Touch Swipe to enable and allow unlocking by swiping black area on the screen.
• Touch Pattern to create a pattern that you will draw on the screen to unlock it.
• Touch PIN or Password to create a PIN or Password that must be entered to unlock the screen.
• For Pattern, PIN or Password, select your preference for notifications and their contents to show the phone is locked. Press Done.

Set up Fingerprint

• Touch the Home Key > swipe up for apps > Settings > Security > Fingerprint
• Follow prompts on screen.

Note: It is important to remember your Pattern, PIN or Password. If you forget it, you will have to reset your phone to factory state, this process will erase all data stored in your phone.

Make and Receive Calls

How to Make and Receive Calls

• From the Home Screen, tap the Phone icon .
• Tap the Keypad icon .
• Enter the number you want to call or the first letters of the contact’s name and select the contact.
• Tap the Call icon to place the call .
• Tap the Answer icon to answer an incoming call .

Adding Contacts

Add new contacts and synchronize them with your Google account and other accounts. To access contacts:
Touch the Home Screen > swipe up for apps > Contacts

• Touch the sign on the lower right.
• Enter the contact name, phone numbers, email address, and any additional information.

Importing Contacts

• Touch Home Key > swipe up for apps > Contacts
• Tap Merge & fix. Select option to restore from other device, Merge duplicates, add people you email often.

Contact Lookup

• Touch Home Key > swipe up for apps > Contacts
• Tap Search contacts > type the name of the contact you are looking for.

Voicemail Setup

Voicemail Setup

• Touch Settings > voicemail
• Follow options to set up

Checking Voicemail

• Touch .
• Touch and hold the “1” key on the keypad. When prompted, enter your voicemail password.
• Follow the voice prompts to listen to the messages and manage your mailbox.

Text and Picture Messaging

Sending a Text

• From the home screen, tap .
• Tap Start chat.
• Enter the name or number of the recipient.
• Enter your message.
• To add an attachment to your message, tap .
• To add a picture to your message, tap
• Tap to send your message .

Quick Settings

Notification Panel

• Touch Home key > swipe up for apps > Settings > Apps and notifications > Notifications
• Set your preferences for different apps notifications

Shortcut Buttons

• To create an app shortcut, touch and hold any preloaded or downloaded app and drag it onto the home screen.
• On the bottom of the home screen is a customizable area for your primary applications. You can keep up to five applications here. Drag applications in or out of this area to customize.

Using your Mobile Internet

Accessing the Web

• Touch Home key > swipe up for apps > Chrome

Enabling Mobile Data

• Touch Home key > swipe up for apps > Settings > Network & Internet > Mobile network
• Tap to enable or disable Mobile data

Connecting to Wi-Fi

• Touch the Home Screen > swipe up for apps > Settings > Network & Internet > Wi-Fi.
• Make sure Wi-Fi is ON.
• Select network or touch Add Network.
• Enter the network SSID and other required information.
• Touch Connect.

Bluetooth Connectivity

Turn ON/OFF

Connect with other Bluetooth devices that are located within a distance of approximately 30 feet.
Bluetooth devices must be paired in order to connect.

• Touch the Home Screen > swipe up for apps > Settings  > Connected devices > Connection preferences > Bluetooth.
• Touch the switch   to turn Bluetooth ON/OFF > Pair new device.

Pairing Devices

• Make sure Bluetooth is turned ON.
• To easily identify your phone, you can change the name.
• Touch Home Screen > swipe up for apps > Settings  > Connected devices.
• Touch (Device name) > Rename this device.
• Enter a name and touch RENAME to continue.
• Your phone will scan for and display the names of all available Bluetooth devices in the area. Touch > Refresh if you want your phone to scan again.
• Touch the name of the device you want to pair with.

Notification and Status Icons

Regulatory Agency Information

Important Safety Information

Keep the phone (“Product”) away from dust, water, damp areas, precipitation and humidity. Dust, water, liquids, precipitation and humidity may cause overheating, electrical leakage, and/or Product failure. The Product, battery, charger and AC adapter are not waterproof.
Keep them away from liquid, fuels and chemicals. If the Product gets wet, do not place the Product in an oven, microwave or dryer, as this will damage the Product and could cause a fire or explosion.

Only use the battery and charger approved by the manufacturer. Using other brands may cause battery leakage, overheating, explosion or even fire. Do not use the Product where it might cause danger. Do NOT text and drive.

Battery Use

Handle and store batteries properly to avoid injury or damage. Most battery issues arise from improper handling and, particularly, from the continued use of damaged batteries.

• Do not disassemble or open crush, bend or deform, puncture or shred
• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard.
• Only use the battery for the system for which it is specified
• Only use the battery with a charging system that has been qualified with the system per CTIA Certification Requirements for Battery System Compliance to IEEE 1725. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard.
• Do not short circuit a battery or allow metallic conductive objects to contact battery terminals.
• Replace the battery only with another battery that has been qualified with the system per this standard, IEEE-Std-1725. Use of an unqualified battery may present a risk of fire, explosion, leakage or other hazard.
• Only authorized service providers shall replace battery. (If the battery is non-user replaceable)
• Promptly dispose of used batteries in accordance with local regulations
• Battery usage by children should be supervised.
• Avoid dropping the phone or battery. If the phone or battery is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection.
• Improper battery use may result in a fire, explosion or other hazard.
• The maximum operating temperature is 55°C.

Note: The battery shall only be serviced by the manufacturer.
CAUTION: Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries in accordance with local regulations.

Cleaning and Maintenance

The Product, the battery and the charger are not waterproof. Do not use them in places with high humidity like a bathroom and also avoid spilling any liquids on the Product, battery or charger. Use a soft cloth to clean the Product, the battery and the charger. Do not use alcohol, diluted liquid or benzene to clean the Product.

Disposal of Product and Batteries

Follow local regulations regarding disposal of mobile devices and batteries. In some areas, the disposal of these items in household or business trash may be prohibited. Please follow your local regulations and recycle Product if required Batteries must be recycled or disposed of properly.

Certification Information (RoHS)

We at Orbic take our social responsibility seriously and are committed to the cause of serving our environment. It is in keeping with these commitments that we are proud to state that Orbic phones are RoHS compliant.

Hearing Aid Compatibility Information

This device supports hearing aid compatibility refer to the gift box label for the specific rating. This phone has been tested and rated for use with hearing aids for some of the wireless technologies it uses. However, there may be some newer technologies that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Ask your service provider or the manufacturer of this phone for information on hearing aid compatibility. When some mobile phones are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise and phones also vary in the amount of interference they generate.

FCC SAR Warning

This model phone meets the government’s requirements for exposure to radio waves.

This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government:
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. The SAR guideline includes a considerable safety margin designed to assure the safety of all persons regardless of age and health.

The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on: FCC ID: 2ABGH-R678EL or at http://www.orbic.us/
For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the handset a minimum of 10 mm from the body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory and are not holding the phone at the ear, position the handset a minimum of 10 mm from your body when the phone is switched on.

Hearing Aid Compatibility Hac For Wireless Telecommunications Devices

THIS PHONE HAS A HAC RATING OF M4/T3 WHAT IS HEARING AID COMPATIBILITY?
The Federal Communications Commission has implemented rules and a rating system designed to enable people who wear hearing aids to more effectively use these wireless telecommunications devices. The standard for compatibility of digital wireless phones with hearing aids is set forth in American National Standard Institute (ANSI) standard C63.19. There are two sets of ANSI standards with ratings from one to four (four being the best rating): an “M” rating for reduced interference making it easier to hear conversations on the phone when using the hearing aid microphone, and a “T” rating that enables the phone to be used with hearing aids operating in the tele-coil mode thus reducing unwanted background noise.

HOW WILL I KNOW WHICH WIRELESS PHONES ARE HEARING AID COMPATIBLE?
The Hearing Aid Compatibility rating is displayed on the wireless phone box. A phone is considered Hearing Aid Compatible for acoustic coupling (microphone mode) if it has an “M3” or “M4” rating. A digital wireless phone is considered Hearing Aid Compatible for inductive coupling (tele-coil mode) if it has a “T3” or “T4” rating.

HOW WILL I KNOW IF MY HEARING AID WILL WORK WITH A PARTICULAR DIGITAL WIRELESS PHONE?
You’ll want to try a number of wireless phones so that you can decide which works the best with your hearing aids. You may also want to talk with your hearing aid professional about the extent to which your hearing aids are immune to interference, if they have wireless phone shielding, and whether your hearing aid has a HAC ratio.

FCC Statement

This Product complies with Part 15 of the FCC Rules. Operation is subject to the following three conditions:
(1) This Product may not cause harmful interference, and
(2) This Product must accept any interference received, including interference that may cause undesired operation.
(3) Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE 1:
This Product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This Product generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this Product does cause harmful interference to radio or television reception, which can be determined by turning the Product off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• To view device FCC ID on a device look at the label in the battery compartment, for devices without a battery door there is a E-label information available by selecting: Settings > About phone

NOTE 2:
Orbic or the manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to the Product. Such modifications could void the user’s authority to operate the equipment.

Data transmission is always initiated by software, which is then passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC.
These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinues transmission in case of either absence of information to transmit or operational failure.

ORBIC LIMITED WARRANTY

WHO THIS WARRANTY COVERS
This 12 month limited warranty extends only to the original purchaser of this product within the United States. This warranty is not transferable. This warranty is conditioned upon the proper use of the Product.

WHAT THIS WARRANTY COVERS
Orbic offers you a limited warranty that extends for the first twelve (12) month period to the original purchaser from the date of original purchase with proof of purchase. Without valid proof of purchase, Orbic offers a limited warranty extending fifteen (15) months from date of manufacture, which is coded on the product label (“Warranty Period”).

Should the Product, inbox accessories or any part during normal consumer usage and conditions be proven defective in material or workmanship that results in Product failure, such defect(s) will be repaired or replaced (with new or rebuilt parts) at Orbic’s discretion, without charge for parts or labor directly related to the defect.

WHAT THIS WARRANTY DOES NOT COVER

1. Warranty claims outside of the Product warranty Period.
2. Damage or defects caused by using the Product other than in the normal course.
3. Defects or damages resulting from accidental, misuse, abnormal use, abnormal conditions, improper storage, unauthorized modifications, unauthorized repair, improper installation, or other acts which are not the fault of Orbic.
4. Defects or damage resulting from excessive force or use of a metallic object when pressing the touch screen.
5. Product with altered, defaced or removed serial number.
6. Damage resulting from use of accessories not approved by Orbic.
7. Damage from exposure to moisture, humidity, excessive temperature or extreme environment.
8. Liquid damage due to not properly sealed/locked accessories, ports and or battery latches of water resistance devices.
9. All surfaces and externally exposed parts that are scratched or damaged due to normal customer use.
10. All software, including operating system software, third-party software, applications, and all other software of any kind.
11. Damage caused by ordinary wear and tear of the Product.
12. Customer abuse or other physical abuse or mistreatment of Product as evidenced by:
    a. Missing required faceplate;
    b. Damaged LCD or Lens (e.g., the product is either broken, cracked, smashed, bleeding, etc.; otherwise, on behalf of Orbic regarding the Product or this Limited Warranty.

This Limited Warrant gives you specific legal rights and you may also have other rights that vary from state to state.

WHAT ARE THE PROCEDURES FOR RESOLVING DISPUTES?
ALL DISPUTES WITH ORBIC ARISING IN ANY WAY FROM THIS LIMITED WARRANTY OR THE SALE, CONDITION OR PERFORMANCE OF THE PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH FINAL AND BINDING ARBITRATION, AND NOT BY A COURT OR JURY. Any such dispute shall not be combined or consolidated with a dispute involving any other person’s or entity’s products or claim and, specifically, without limitation of the foregoing, shall not under any circumstances proceed as part of a class action. The arbitration shall be conducted before a single arbitrator, whose award may not exceed, in form or amount, the relief allowed by applicable law. The arbitration shall be conducted according to the American Arbitration Association (AAA) Commercial Arbitration Rules applicable to consumer disputes. This arbitration provision is entered pursuant to the Federal Arbitration Act. The laws of the State of New York, without reference to its choice of laws principles, shall govern the interpretation of the Limited Warranty and all disputes that are subject to this arbitration provision. The arbitrator shall decide all issues of interpretation and application of this arbitration provision and the Limited Warranty. This arbitration provision also applies to claims against Orbic’s employees, representatives and affiliates if any such claim arises from the Product’s sale, condition or performance.

HOW TO GET WARRANTY SERVICE
To obtain warranty service, please call the following telephone number from anywhere in the continental United States: 1-877-872-4555

References

• Orbic
• Orbic

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>