Jackery JS-80A SolarSaga 80W Solar Panel User Guide
- June 12, 2024
- Jackery
Table of Contents
Jackery JS-80A SolarSaga 80W Solar Panel
Product Information
- Product Name: SolarSaga 80
- Model: JS-80A
Technical Parameters
- Peak power (Pm): 22.2V 3.55A
- Open circuit voltage (Voc): 80V
- Short circuit current (lsc): 6.1A
- Power voltage (Vm): 22.5V 3.75A
- Power current (Im): 80V 6.1A
- Maximum system voltage : Class II
- Maximum reverse current : 22.5V 3.75A
- Protection class against electric shock: Class II
- Consumer Goods Category: IEC TS63163 Consumer product category 2
- Max Quantity in Series: Not specified
- Max Quantity in Parallel: Not specified
- Operating Temperature Range: -10°C to 65°C (14°F to 149°F)
- Dimensions: 906x528x27mm
- Product Weight: 5.1kg
Product Usage Instructions
The SolarSaga 80 has two ports for different types of outdoor power products:
DC8020 Port (Figure 1)
This port is compatible with Jackery outdoor power supply
E1000Pro/1500/2000Pro. Connect the solar panel to the DC8020 port using the 2m
cable provided.
DC8020-DC7909 Port (Figure 2)
This port is compatible with Jackery outdoor power supply
E160/240/300/500/1000. Connect the solar panel to the DC8020-DC7909 port using
the 2m cable provided.
Note: The product supports parallel connection of up to 3 solar panels (Figure 3). Do not connect more than 3 solar panels in parallel as it may cause cable heating and product damage. An extension cord is provided to extend the scope of use.
Two-Side Power Generation Technology
Use Figure 4 mode in light or calm conditions to avoid blowing down the
product. When the wind speed is high, it is recommended to use Figure 5 mode.
Safety Tips
- Do not place folding solar panels in shaded areas and minimize obstructions like trees and buildings.
- Do not soak the solar panels in water or any other liquid.
- Do not clean the solar panel with water; gently wipe it with a damp cloth.
- Prevent corrosive substances from damaging the solar panels.
- Do not disassemble the solar panels.
- Ensure correct connection of the output circuit to the equipment. Do not short-circuit the positive and negative poles. Check for gaps between connectors and insulated connectors to avoid sparks or electrical shocks.
- Regularly check the connection status of each component, including cables, wires, and plugs.
Warranty
The product is covered by a limited warranty from Jackery for the original
purchaser. The warranty covers defects in workmanship and materials for 36
months from the date of purchase. Damages from normal wear and tear,
alteration, misuse, neglect, accident, service by anyone other than the
authorized service center, or acts of God are not included. Proper proof of
purchase is required.
Frequently Asked Questions
Q: What kind of battery can be charged by these solar modules?
A : These solar modules can charge Jackery Explorer series, sealed
lead-acid batteries, colloidal lead-acid batteries, and open lead-acid
batteries.
Q: How to clean the solar surface?
A : Do not clean the solar panel with water. Instead, gently wipe it
with a damp cloth.
TECHNICAL PARAMETERS
| Electrical Data | STC | BNPI |
|---|---|---|
| Peak power (Pm) | 80W‡5% | 86W‡5% |
| Open circuit voltage (Voc) | 27.2V‡5% | 27.5V‡5% |
| Short circuit current (lsc) | 3.65A+5% | 4.0A+5% |
| Power voltage (Vm) | 22.2V | 22.5V |
| Power current (Im) | 3.55A | 3.75A |
| Maximum system voltage | 80V | |
| Maximum reverse current | 6.1A | |
| Protection class against electric shock | Class II | |
| Bifaciality coefficient (back/front) | Pm: >70%. Voc: >97%. Isc: >70% | |
| Consumer goods category | IEC TS63163 Consumer product category 2 | |
| Max quantity in series | 2 | |
| Max quantity in parallel | 3 | |
| Operating temperature range | -10-65 (14-149 ) | |
| Dimensions | 906x528x27mm | |
| Product weight | 5.1kg |
IN THE BOX
METHOD OF APPLICATION
- The product has two ports compatible with different types of outdoor power products:
- DC8020 port applies to Jackery outdoor power supply E1000Pro/1500/2000Pro
- DC8020-DC7909 port applies to Jackery outdoor power supply E160/240/300/500/1000.
- The product supports parallel connection of up to 3 solar panels (Figure 3). Parallel connection of more than 3 solar panels may cause cable heating and product damage
- Extension cord: A 2m extension cord is equipped. Several extension cords can be connected to extend the scope of use
TWO-SIDE POWER GENERATION TECHNOLOGY
A reflective lined storage bag is provided for the product to improve power generation efficiency through reflecting light. The sun angle changes during the day, and the reflective angle can be adjusted by sticking the magic tape. To avoid blowing down the product, use the mode in Figure 4 in light or calm conditions. When the wind speed is high. it is recommended to use the mode in Figure 5.
SAFETY TIPS
- Do not flex or bend the folding solar panels.
- Do not place folding solar panels in shading places, while tree shades, buildings, and any other obstructions should be minimized.
- Do not soak the solar panels in water or other liguid.
- Do not clean the solar panel with water, please gently wipe it with a damp cloth
- Do not use or store solar panels near open flames or flammable materials.
- Do not scratch the surface of solar panels with sharp objects.
- Prevent corrosive substances to damage solar panels.
- Do not step on or place heavy objects on the solar panels.
- Do not disassemble the solar panels.
- The output circuit of the solar panels must be correctly connected to the equipment. Please do not short-circuit the positive and negative poles. Ensure that there is no gap between the connector and the insulated connector. If there is a gap, sparks or electrical shocks will occur.
- Check the connection status of each component, including cables, wires and plugs.
- The product can not be used by fixed installation, please put the portable solar panels away while wind, hail and other bad weather to avoid product damage or other dangers.
- Risk of electric shock caused by product damage.
- Under normal conditions, a photovoltaic module is likely to experience conditions that produce more current and/or voltage than reported at standard test conditions. Accordingly, the values of Is and Voc marked on this module should be multiplied by a factor of 1,25 when determining component voltage ratings, conductor current ratings, and size of controls connected to the PV output.
- If the module is damaged it could create an electrical shock or fire hazard
FREQUENTLY ASKED QUESTIONS
Q: What kind of battery can be charged by these solar modules?
- Jackery Explorer series
- Sealed lead-acid battery
- Colloidal lead-acid batteries
- The open lead-acid batteries
Q: How to clean the solar surface?
Dust and dirt on the surface should first be removed using a soft brush. Use a damp cloth to wipe the surface of the solar module to remove any remaining dust or dirt. Any guano or other adhesive should be removed as soon as possible from the solar surface to avoid a reduction in performance.
Q: Is this product waterproof?
The waterproof level of this product is IP68. This product can prevent daily water splashing. Please keep the product dry on a daily basis to ensure its service life.
ASSEMBLY INSTRUCTIONS
These shall be provided with a product shipped in subassemblies and shall be detailed and adequate to the degree required to facilitate complete and safe assembly of the product.
CONTACT US
For any inquiries or comments concerning our products, please send an email to hello.eu@jackery.com, and we will respond to you as soon as possible. If there is any quality related issue with the product, you may request a replacement or refund by submitting a request form at www.jackery.com/support/.
CUSTOMER SERVICE
- 36-month limited warranty
- Lifetime technical support
- whello.eu@jackery.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>