VEVOR Electronic Fireworks Machine Instruction Manual
- June 3, 2024
- VEVOR
Table of Contents
VEVOR Electronic Fireworks Machine Instruction Manual
Introduction
Welcome to use our electronic fireworks machine, our company stated that this product requirements from the company to provide supplies. If users violate the company’s requirements, to buy supplies elsewhere, with our electronic fireworks machine caused by the machine machine damage card machine and other issues. The company is not responsible.
Foreword
Dear user: Thank you for using our electronic fireworks machine. In order for
you to use and maintain this machine correctly, please read the manual
carefully before using it, and save it properly for future reference. Caution
for safe use: the machine in the process of electrification, electric shock
injury, high temperature scald risk. Please do not attempt to open the machine
or disassemble or debug any parts installed in the machine. Only a
professional repairman can open the equipment. In case you get electrocuted.
Protect your eyes during the operation of the machine. Does Not imply a
continuous duration effect. The maximum operating time is 30 minutes and can
be reused, but should not overheat the machine. It is forbidden to move and
carry the machine in use. When feeding, please ensure that the machine is shut
down. When feeding, please cover the lid to avoid the waste falling into the
feeding port and causing the machine to jam. Please prevent anything from
entering the outlet of the NOZZLE.
Please remove obstacles before continuing operation. Please prevent the
machine from falling or damage during installation. Please check the nozzle of
the nozzle of the nozzle before use. If you have it, please clean it through
the reverse engine. Use with care lest any liquid wets the machine. Keep the
machine and circuit dry on rainy or snowy days.
Dear user: Thank you for using our electronic fireworks machine. In order for
you to use and maintain this machine correctly, please read the manual
carefully before using it, and save it properly for future reference. Caution
for safe use: the machine in the process of electrification, electric shock
injury, high temperature scald risk. Please do not attempt to open the machine
or disassemble or debug any parts installed in the machine. Only a
professional repairman can open the equipment. In case you get electrocuted.
Protect your eyes during the operation of the machine. Does Not imply a
continuous duration effect. The maximum operating time is 30 minutes and can
be reused, but should not overheat the machine. It is forbidden to move and
carry the machine in use. When feeding, please ensure that the machine is shut
down. When feeding, please cover the lid to avoid the waste falling into the
feeding port and causing the machine to jam. Please prevent anything from
entering the outlet of the NOZZLE.
Please remove obstacles before continuing operation. Please prevent the
machine from falling or damage during installation. Please check the nozzle of
the nozzle of the nozzle before use. If you have it, please clean it through
the reverse engine. Use with care lest any liquid wets the machine. Keep the
machine and circuit dry on rainy or snowy day
Operational Instructions:
-
Plug in the power cord.
-
Remote Code Matching: BOOT page ,Press the MENU key on the display screen to turn to the fourth page of the code , in the press and hold the remote control a key 3 seconds page display for Pair Code check,(Repeatable pair code Page long press remote control a key),
-
Pour the drink into the feeding port.(Please don't add too much or the wrong entry)
-
warm up the temperature, such as the temperature reached 550 degrees can start to use, the remote control according to any of the BCD shift key start injection.
-
Remote Control and DMX console operation, support remote control to connect more than one sprayer operation only need to set up a host, press the DOWN key page on the display screen for Set it to host.(In the remote control of multiple machines when this machine to cancel the host, on the screen by pressing the DOWN key to heavy machined )
Remote Control Instructions:
A| Press A to turn on/off| 
---|---|---
B| Press A to turn on/off Click to start the spark, click B stop the jet, 1
meter to 1.5 meters high in gear
C| Click to start the spark, click to stop the jet, 2 Gears 2 meters to 3
meters high
D| Click to start the spark, click to D stop the jet, 3 Gears 3 meters to 5
meters high
| Spray Direction | Top spray |
|---|---|
| Operating temperature | -10”C -50”C |
| Heating temperature | 
Working Height| When the temperature reaches 550 degrees you can press the
shift key BCD three keys
Power supply| 1 1 0v/1 0a, 220v/6a
Dimensions| 80.7 inch, 82.6 inch 98.4inch
Net weight| 9.92 Lb
Maximum connection| Channel 6
Warranty| A year
Consumables
| Net weight | 0.44Lb |
|---|---|
| Time | 8 to 10 minutes |
| Packing | Vacuum packing |
Packing
| Materia | unit | quantity |
|---|---|---|
| Power | Strip | 1 |
| Signal Line | Strip | 1 |
| Fuse | one | 1 |
| Instruction Manual | one | 1 |
| Instruction | Book | 1 |
| Carton | Pack | 2 in1 |
Maintenance Instructions:
Dust Cleaning (important tips)
- Each use, please clean up and spray the remaining material in the electronic spray machine, for the next use. (Note: The remaining material must not be left in the machine, or the next use may cause a card machine.
- Remove the dustproof net to clean up the dust.
- If there is an open fire, put it out with sand, not water.
- Stay away from children.
If you want to specify a single spray need to be connected to the console
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.