IDEAL 92 Green Greenie Grounding Connector Instructions
- September 13, 2024
- IDEAL
Table of Contents
IDEAL 92 Green Greenie Grounding Connector
INSTRUCTIONS
Use only on Copper to Copper (Cu-Cu) wire combinations. For use in dry
locations only. To be sold only with installation instructions.
Installation Instructions
- Turn off the power before installing or removing connectors.
- For use on solid copper wire only.
- Strip wires if insulated 1” (25 mm). Note: “Through” wire must be stripped full length.
- Insert the “through” wire in the connector first.
- Hold remaining wires together with ends even.
- Pre-twisting is acceptable but not required. Screw on connector – push wires firmly into connector when started.
- Insert wires into the connector and twist clockwise until tight.
Listed as a PRESSURE-TYPE wire connector for use on the following solid Cu-Cu wire combinations. Consult the factory for a complete table of UL-listed and CSA Certified combinations.
- 2 to 4 #12
- 1 #10 w/1 to 2 #12
- 1 #12 w/1 to 3 #14
- 3 #12 w/1 #14
- 2 to 4 # 14
- 1 #10 w/1 to 3 #14
- 2 #12 w/1 to 3 #14
WARNING
Improper use or installation of this product may cause fire, electrocution,
serious personal injury or death. Shut off power to the circuit or remove the
fuse before using this product. Use only connectors properly sized to the
wiring being used. Consult local building codes for installation requirements.
WARNING
- Cancer and Reproductive Harm:www.P65Warnings.ca.gov.
- IDEAL INDUSTRIES, INC. 1375 Park Avenue | Sycamore, IL 60178 | U.S.A.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>