MERKURY WA-STT01 16.4 ft Advanced Light Strip User Manual

MERKURY WA-STT01 16.4 ft Advanced Light Strip User Manual

WHAT’S IN THE BOX?

1.  Color Flow Strip Light
2. Infrared & Sound Reactive Control Box
3. Power Adapter

INSTRUCTIONS

The strip light is connected to the control box. After the adapter is connected to the controller, plug the adapter into the power supply, open the corresponding app, then can use the functions in the APP to adjust the lighting mode.

PLACE STRIP LIGHTS

Peel off the protective paper backing Note: Be careful not to peel of the adhesive.

Be sure to clean the surface you intend to install the strip lights on. Peel off the adhesive backing, making sure to not remove the actual adhesive. Press and firmly hold the light strip in place for 30 seconds.

Notes: Not all surfaces have the same textures and some surfaces may require additional support to hold up the strip lights.

DOWNLOAD APP

Android : Download “Symphony Light” app on Google Play.
iPhone : Download “Symphony Light” app from the App Store.

Download Symphony Light

In the app, tap the 3 lines in the upper left corner to select the “West & Arrow Strip Light” device.

USING INSTRUCTIONS

ADDING A DEVICE

COLOR PALETTE INTERFACE

Select solid colors using the color wheel and adjust brightness with the slider.

MODE INTERFACE

Choose from hundreds of dynamic light scenes and adjust the speed of the animations.

MICROPHONE INTERFACE

Use this mode to enable the sound react feature from any sounds your phone hears, including music streaming services.

Note: The sound reactive light show depends on the volume and distance of the music from the control box.

MUSIC CONTROL INTERFACE

Select from music stored on your phone and the lights will dance to the beat.

Note: For streaming music use the “Mic” mode.

TIMING MODE INTERFACE

Set a schedule for the lights to automatically turn on and off.

WARNING
To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment.

FCC STATEMENT

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

TECHNICAL SUPPORT

Please do not attempt to fix the product by yourself. If you are experiencing any problems with the product, please do not return it to the store you bought it from. You can contact our technical support representatives and they will assist you with any questions you might have. For assistance operating your product, please consult the User’s Manual first, then feel free to contact support@westandarrow.com

© 2023 Merkury Innovations LLC
To explore our full selection of products, visit us at: www.westandarrow.com The illustrated product and specifications may differ slightly from that supplied. West & Arrow is a trademark of Merkury Innovations, LLC. Instagram is a trademark of Facebook, Inc. and its affiliate companies. All other trademarks and trade names are those of their respective owners. Made in China

Support

Check out our latest products & follow our story!

www.westandarrow.com
Insta: @westandarrowco

NEED HELP?

EMAIL US: support@westandarrow.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>