anko 43055845 High Gain ANtenna Instruction Manual
- June 7, 2024
- Anko
Table of Contents
anko 43055845 High Gain Antenna Instruction Manual
Warranty Details
12 Month Warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law.
Kmart will provide you with your choice of a refund, repair or exchange (where possible) for this product if it becomes defective within the warranty period. Kmart will bear the reasonable expense of claiming the warranty. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer
Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or
alternatively, via Customer Help at Kmart.com.au for any difficulties with
your product. Warranty claims and claims for expense incurred in returning
this product can be addressed to our Customer Service Centre at 690 Springvale
Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.
https://myswitch.digitalready.gov.au/
Safety Instructions
Read this manual thoroughly before first use and keep it in a safe place for future reference, along with the purchase receipt and carton. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Follow all instructions and take notice of all warnings to reduce the risk of fire or electric shock.
- Do not expose this product to water, rain, moisture or dust. Electronic products of this kind should never be subjected to moisture or extreme temperatures.
- Do not attempt to open the product housing. There are no user-serviceable parts inside this product.
- Do not repair the unit yourself. If your device is not functioning correctly, disconnect the product from power, and contact after sales support.
- Supervise young children to ensure they do not play with the product.
- Do not expose to water, dust, moisture, chemicals, oils, or other liquids.
- Do not expose to naked flames or other heat sources.
- Do not drop or subject the device to undue shock.
- Keep device away from magnets at all times.
- Keep away from direct sunlight. Indoor use only.
- Unplug this device during lightning storms or when unused for long periods of time.
Parts List
- 1 x High Gain Antenna
- 1 x External Amplifier
- 1 x Power Adaptor
- 2 x Extendable Dipoles
- 1 x Stand
Technical Specifications
Frequency: VHF(l 74-230MHz) UHF(470-694MHz)
Output level: Max84dBμV
Impedance: 75
Input Voltage: AC100-240V
Operating Power: DC5V/550mA
Connector: IEC-connector Male
Dimensions: 15421286mm
Features
Reception
- Receive Full HD Television, Digital signals and DAB Radio Programs
- External dipoles to enhance VHF reception
- External amplifier design, suitable for areas with weak to strong signals
- Adjustable amplifier with separated VHF and UHF wide band amplifier achieve best picture and sound quality
- Signal clear technology with extremely low noise circuity
- For reception of local and regional UHF and VHF reception
Power
- Powered by AC/DC power adaptor
Design
- Ultra flat design
- Fabric touch
Instructions
Antenna Basics
Variables unrelated to product performance can affect reception. These include obstacles and terrain between the transmitter and your antenna, radiated energy from electronic components and building materials such as concrete or aluminum paneling. Consider these factors during installation. For best results, test the antenna in multiple locations until you find a position that provides the best reception.
Configure For Best Signal
Use the following guide to ensure that the best reception signal can be achieved.
Coverage
Check your reception coverage in your area by visiting
http://myswitch.digitalready.gov.au/ and entering your address. This antenna
is suitable for areas with Good Coverage. If your address does not have Good
Coverage, you may not be able to pick up all digital channels with this
antenna. A rooftop antenna may be necessary.
Angle
Position the front or back of the High Gain Antenna to be facing the strongest
transmission tower. (Indicated on
myswitch.digitalready.gov.au by the
green line)
Location
Placing the High Gain Antenna near a window will also increase the signal strength.
Amplification
Adjust the amplification dial until a strong signal is achieved. Some areas
won’t require amplification, meaning the adapter is not required.
Try different angles, locations and amplification levels until a strong signal is achieved for all channels.
Connecting
1. Connecting the High Gain Antenna to a TV
- a. Connect the antenna cable to the Amplifier
- b. Connect the Amplifier to the antenna input on your TV
- c. Connect the Power Adaptor to the DC SV socket on Amplifier
- d. Plug the Power Adaptor into a mains power point and switch the power point on
- e. Tune channels as per your TV instruction manual
- f. Adjust the UHF and VHF dials on the Amplifier and move dipoles on the antenna until you achieve the clearest signal
TIP: Areas with strong signals may not require the amplifier. If you are not receiving a signal, try unplugging the amplifier (and plugging the antenna directly into your TV) and adjust the dipoles.
2. Connecting the High Gain Antenna to a Set Top Box
- a. Connect the antenna cable to the Amplifier
- b. Connect the Amplifier to the antenna input on your Set Top Box
- c. Connect the Power Adaptor to the DC V socket on Amplifier
- d. Plug the Power Adaptor into a mains power point and switch the power point on
- e. Tune channels as per your Set Top Box instruction manual
- f. Adjust the UHF and VHF dials on the Amplifier and move dipoles on the antenna until you achieve the clearest signal
TIP: Areas with strong signals may not require the amplifier. If you are not receiving a signal, try unplugging the amplifier (and plugging the antenna directly into your TV) and adjust the dipoles.
FAQs and Other Useful Information
Do I have to use the amplifier?
The power adaptor can improve the signal in some cases. If you are already
receiving a good signal you do not need to use the amplifier.
What can I do to improve my reception?
You need to find the best signal for the antenna. This can often be achieved
by moving the antenna to face different directions or different locations.
Also try to adjust the dipoles and amplifier strength. Follow the guide in
‘CONFIGURE FOR BEST SIGNAL’.to maximize the signal received by the antenna.
Why are some channels not appearing on my TV or set top box?
After connecting the antenna, make sure you scan for new channels in your TV
or set top box’s channel menu, otherwise they may not appear when you try to
change channels.
Can I use this antenna outdoors?
This antenna is designed for indoor use only.
Tips and Troubleshooting
- Move the antenna around to find the best place for reception in your room.
- Never mount the antenna until you have tested the antenna in that location.
- Some locations are not suitable for indoor antennas. If you are still having difficulty producing an adequate signal after all steps in this manual have been attempted, a rooftop antenna may be required.
- In regions with very strong reception signals, too much amplification can result in a poor picture. Plug the antenna directly into your TV/Set Top Box without the amplifier to improve the reception.
I’M NOT GETTING RECEPTION
THESE STEPS SHOULD HELP
- Connect Adaptor and Antenna to Amplifier
- Extend Antenna Ears
- Turn Amplifier on by sliding the Dial towards the right until you hear a ‘click’ sound
- Set Amplifier to minimum
- Connect to TV
IF YOU DON’T RECEIVE CHANNELS, THERE ARE TWO POSSIBLE ISSUES
SIGNAL TOO STRONG
SIGNAL TOO WEAK
Documents / Resources
| anko
43055845 High Gain
ANtenna
[pdf] Instruction Manual
43055845, High Gain ANtenna
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>