nevir NVR-7803-32RD2S-N DLED HD Television User Manual

nevir NVR-7803-32RD2S-N DLED HD Television

Product Information

Specifications

• Model: NVR-7803-32RD2S-N
• Type: DLED HD Television
• Screen Size: 32 inches (81cm)
• Features: DVB-T2, DVB-S2

Product Usage Instructions

Menu Operation

Use the MENU button to access and navigate through the TV menu options. Use the directional pad to move the cursor and make selections.

Power and Volume Control
To turn the TV on or off, press the POWER button. Use VOL+ and VOL- buttons to adjust the audio volume.

Channel Selection

Press CH+ or CH- to switch to the next or previous channel. Use NUMBER BUTTONS to directly enter a specific channel number.

Audio and Picture Settings
Use the AUDIO button to select audio systems and the PICTURE button to choose different picture modes. Adjust sound aspect and picture ratio as needed.

Electronic Program Guide (EPG)
Access the EPG by pressing the EPG button. This feature is available in DTV mode and provides program information.

Recording and Playback
To record a program, press the REC button. Use the media control buttons for playback functions like play, pause, stop, forward, and backward.

Teletext Functions
In TXT mode, use INDEX to access the main page, Teletext to view text information, HOLD to freeze pages, and SUBPAGE to display hidden information.

Frequently Asked Questions (FAQ)

• Q: How do I access the channel list?
  A: Press the LIST button to call up the channel list on your TV.

• Q: What is the purpose of the COLOR BUTTONS?
  A: The COLOR BUTTONS are used for navigation links or program editing options while using certain features on the TV.

• Q: How can I start recording a program to a USB flash disk?
  A: Press the REC button to initiate recording of the currently viewed channel stream onto your USB flash disk.

Installation

1. Locate the TV in a room where direct light does not strike the screen. Total darkness or reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
2. Allow enough space between the receiver and the wall to permit ventilation.
3. Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure.
4. Do not install the TV in a location near heat sources such as radiator, air ducts, direct sunlight, or in a place somewhere like close compartment and close area. Do not cover the ventilation openings when using the TV.
5. The indicator light will last about 30 seconds to go out after cutting off the electricity, during this period, you cannot repower it on until the indicator light goes out, thanks a lot for your attention!
6. To prevent the spread of fire, keep candles or other open flames away

SAFETY INSTRUCTION

Warning
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN.
CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

• This symbol is intended to alert the user to avoid the risk of electric shock, do not disassemble this equipment by anyone except a qualified service personnel.
• This symbol is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the equipment.
• This equipment is a Class II or double-insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

Caution

• Caution
  High voltages are used in the operation of this product.
  Do not open the product’s casing. Refer servicing to qualified service personnel.

• Caution
  To prevent fire or electrical shock hazard, do not expose the main unit to rain or moisture, do not place objects filled with liquids, such as vases, on the apparatus.

• Caution
  Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.

• Caution
  Avoid exposing the main unit to direct sunlight and other sources of heat. Do not stand the television receiver directly on other products which give off heat. E.g. video cassette players, Audio amplifiers. Do not block the ventilation holes in the back cover. Ventilation is essential to prevent failure of electrical component. Do not squash power supply cord under the main unit or other heavy objects.

• Caution
  Never stand on, lean on, push suddenly the product or its stand. You should Pay special attention to children.

• Caution
  Do not place the main unit on an unstable cart stand, shelf or table. Serious injury to an individual, and damage to the television, may result if it should fall.

• Caution
  When the product is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.

• Caution
  The LED panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the LED panel breaks.

Main unit description

Control Panel Button Function

• SOURCE: Select the input signal.
• MENU: Press to select the main menu.
• VOL+: Volume up.
• VOL-: Volume down.
• CH+: TV channel up.
• CH-: TV channel down.
• POWER: Turn the TV on or off.

TV Terminal Connections

Optional Configuration as below:
Connect the USB to the USB jack on the set.

NOTE

• It is only 500 mA MAX of DC current output when you connect with USB jack
• To ensure the Mobile HD works well, you should use other power supply for the Mobile HD. And do not use the USB jack in the same time.

Remote Control

Note:

• All pictures in this manual are examples, only for reference, the actual product may differ from the picture.
• The buttons not mentioned here are not used.

Installation Guide

If this is the first time you are turning on the TV and there are no programs in the TV memory, the “Installation Guide” menu will appear on the screen.

1. OSD Language
   Press【▼】/【▲】button to select the language to be used for menus and message.

2. Country/region
   Press【▼】/【▲】button to select the country/region you want to.

3. Antenna Type
   Press【▼】/【▲】button to select Air/cable/satellite.

4. Auto Scan
   Press【▼】/【▲】button to select Mode: DTV+ATV, ATV,DTV .

Menu Operation

Picture Menu
Press MENU button to display the main menu.
Press【◄】/【►】button select PICTURE in the main menu,then press ENTER / ▼ to enter.

1. Press【▼】/【▲】button to select the option that you want to adjust in the PICTURE menu.
2. Press Enter【◄】/【►】button to adjust.
3. After finishing your adjustment, Press MENU button to return back to the previous menu.

• Picture MODE
  Press【▼】/【▲】button to select Picture Mode, then press【►】button to select. (Available Picture mode: Standard/Dynamic/Movie/User).

• Brightness/Contrast/ Sharpness/Saturation/Hue
  Press【▼】/【▲】button to select option, then press【►】button to adjust.

• Color Temperature
  Press【▼】/【▲】button to select Color Temperature, then press【►】button to select Standard/Cool/Warm.

• Aspect Ratio
  Press【▼】/【▲】button to select Aspect Ratio, then press【►】button to select Full/Zoom1/Zoom2/Auto/4:3.

• Noise Reduction
  Select the High/Middle/Low/Off to improve the quality of the picture.

• HDMI Mode
  Screen Mode(It only available on HDMI source.)

Sound Menu
Press MENU button to display the main menu.
Press【◄】/【►】button select SOUND in the main menu, then press ENTER / ▼ to enter.

1. Press【▼】/【▲】button to select the option that you want to adjust in the SOUND menu.
2. Press Ente【◄】/【►】button to adjust.
3. After finishing your adjustment, Press MENU button to return back to the previous menu.

• Sound Mode
  Press【▼】/【▲】button to select Audio Mode, then press【◄】/【►】button to select. (Available Sound mode: Standard, Music, Personal, Movie).

• Bass
  Adjust the bass effect. Increases or decreases lower-pitched sounds.

• Treble
  Adjust the treble effect. Increases or decreases high-pitched sounds.

• Balance
  Adjust the balance between left and right speakers to adapt to your listening position.

• Surround
  Press【▼】/【▲】button to select Surround Sound, then press【◄】/【►】button to select On or Off.

• AVL
  Automatically reduces sudden volume changes, for example,when switching beween the channels.
  Press【▼】/【▲】button to select AVL, then press【◄】/【►】button to select On or Off.

• Digital Audio Out
  Press【▼】/【▲】button to select Digital Audio Out, then press【◄】/【►】button to select Off / Auto/PCM.

• Audio Description
  Press【▼】/【▲】button to select Audio Description , then press Enter / ►button to enter sub-menu.

Channel Menu
Press MENU button to display the main menu.
Press【◄】/【►】button to select CHANNEL in the main menu,then press ENTER / ▼ to enter.

1. Press【▼】/【▲】button to select the option that you want to select in the CHANNEL menu.
2. Press Enter button to enter sub-menu.
3. Press MENU button to return back to the previous menu.

• Channel Edit
  Press【▼】/【▲】button to select Channel Edit , then press Enter / ►button to enter sub-menu.

• Favorite List
  Press【▼】/【▲】button to select Favorite List, then press Enter / ►button to enter sub-menu.

• Country/region
  Press【▼】/【▲】button to select Country/region,then press【◄】/【►】button to select. (Germany/France/ltaly/Spain/Portugal/Russia/Belarus/Monaco).

• Antenna Type
  Press【▼】/【▲】button to select Antenna Type,then press【◄】/【►】button to select. (Air/Cable/Satelite).

• Auto Search
  Press【▼】/【▲】button to select Auto Search , then press Enter / ►button to enter sub-menu.

• DTV Manual Search
  Press【▼】/【▲】button to select DTV Manual Search , then press Enter / ►button to enter sub-menu.

• ATV Manual Search
  Press【▼】/【▲】button to select ATV Manual Search , then press Enter / ►button to enter sub-menu.

• LCN
  Press【▼】/【▲】button to select LCN,then Press【◄】/【►】button to select LCN: On/Off.

Feature Menu
Press MENU button to display the main menu.
Press【◄】/【►】button select Feature in the main menu, then press ENTER / ▼ to enter.

1. Press【▼】/【▲】button to select the option that you want to adjust in the Feature menu.
2. Press Enter/【◄】/【►】button to adjust.
3. After finishing your adjustment, Press MENU button to return back to the previous menu.

• Lock
  Press【▼】/【▲】button to select Lock, then press Enter / ►button to enter sub- menu.

• Language
  Press【▼】/【▲】button to select Language, then press Enter / ►button to enter sub-menu.

• Clock
  Press【▼】/【▲】button to select Clock, then press Enter / ►button to enter sub- menu.

• Sleep Timer
  Press【▼】/【▲】button to select Sleep Timer, then press【◄】/【►】button to select Off /10mins/ 20mins/30mins/60mins/90mins/120mins/180mins/240mins.

• Auto Standby
  Press【▼】/【▲】button to select Sleep Timer, then press【◄】/【►】button to select Off /3Hours/ 4Hourss/5Hours.

• Hearing Impaired
  Press【▼】/【▲】button to select Hearing Impaired, then press【◄】/【►】button to select On or Off.

• CI Into
  Press【▼】/【▲】button to select CI Into, then press Enter / ►button to enter sub- menu.

• PVR/Timeshift
  Press【▼】/【▲】button to select PVR/Timeshift, then press Enter / ►button to enter sub-menu. (Parition Select/Auto Timeshift/Timeshift Buffer/Schedule/List/Record List/Recorder Start).

• PVR/Timeshift
  Press【▼】/【▲】button to select PVR/Timeshift, then press Enter / ►button to enter sub-menu. (Parition Select/Auto Timeshift/Timeshift Buffer/Schedule/List/Record List/Recorder Start).

• HDMI CEC
  Press【▼】/【▲】button to select HDMI CEC , then press Enter / ►button to enter (CEC Control/TV Auto Power on/Device Auto Power off/Speaker Preference/HDMI ARC/Device List).

Setup Menu
Press MENU button to display the main menu.
Press【◄】/【►】button select SETUP in the main menu, then press ENTER / ▼ to enter.

1. Press【▼】/【▲】button to select the option that you want to adjust in the SETUP menu.
2. Press Enter/【◄】/【►】button to adjust.
3. After finishing your adjustment, Press MENU button to save and return back to the previous menu.

• OSD Timer
  Press【▼】/【▲】button to select OSD Timer, then press【◄】/【►】button to select Never 5 Seconds/ 10 Seconds/15 Seconds/20 Seconds/25 Seconds/30 Seconds.

• Blue Screen
  Press【▼】/【▲】button to select Blue Screen, then press【◄】/【►】button to select On or Off.

• Reset TV Setting
  Press【▼】/【▲】button to select Reset TV Setting , then press Enter / ►button to enter sub-menu.

Media Play

Note: Before operating USB menu,Plug in USB device, then press INPUT button to set the Input Source to USB. Press【◄】/【►】button to select USB in the Source menu, then press Enter button to enter.
Press【◄】/【►】button to select the option you want to adjust in the main USB menu, then press Enter button to enter.

• Photo
  • Press【◄】/【►】button to select PHOTO in the main menu, then press OK button to enter.
  • Press【▼】/【▲】button to select drive disk you want to watch, then press OK button to enter.
• Music
  • Press【◄】/【►】button to select MUSIC in the main menu, then press OK button to enter.
  • Press【▼】/【▲】button to select drive disk you want to watch, then press OK button to enter.
• Movie
  • Press【◄】/【►】button to select MOVIE in the main menu, then press OK button to enter. Press【▼】/【▲】button to select drive disk you want to watch, then press OK button to enter.

Trouble Shooting

Before consulting service personnel, check the following chart for possible solutions.

The TFT LED panel uses a panel consisting of sub pixels which requires sophisticated technology to produce. However, there may be a small number of bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive)

DIRECTIVA EMC
EN 55032:2015+A11:2020+A1:2020
EN 55035:2017/A11:2020
EN TEC 61000-3-2:2019/A1:2021
EN 61000-3-3:2013/A1:2019/A2:2021

DIRECTIVA RED
EN 55032:2015+A11:2020+A1:2020
EN 55035:2017/A11:2020ETSI EN 300 328 V2.2.2(2019-07)
ETSI EN 303 340 V1.2.1(2020-09)

LOW VOLTAGE DIRECTIVA EEC
EN IEC 62368-1:2020+A11:2020

Importador: NEVIR, S.A.
Dirección del importador: NEVIR, S.A.
C/Francisco Rabal, 3
Polígono Industrial La Garena
28806 Alcala de Henares, Madrid, España

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>