tapo C420S2 Smart Wire-Free Security Camera System User Guide

: June 12, 2024
: tapo

Table of Contents

Safety Information
Mount the Camera After Setup
Charge the Battery
Set Up
Local Recording
Reset
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

tapo C420S2 Smart Wire-Free Security Camera System User Guide

Safety Information

Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Do not use the device where wireless devices are not allowed.
Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.
Adapter shall be easily accessible.

CAUTION!
Risk of fire or explosion if the battery is replaced by an incorrect type.

CAUTION!
Avoid replacement of a battery with an incorrect type that can defeat a safeguard. Avoid disposal of a batteryinto fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; Do not leave a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Mount the Camera After Setup

Images may differ from the actual products.

Note: Images may differ from the actual products.

Charge the Battery

**Method 1: Battery Itself

**

LED indication	Charging: Steady orange

Fully charged: Steady green

Method 2: Battery Inside Camera

*Check battery status in the Tapo app after setup.

Set Up

Get the Tapo app from the App Store or Google Play.
Follow the app instructions to set up your hub and camera.
Follow the app instructions to mount your camera.

Local Recording

If you want the camera to record videos locally, insert a microSD card to your hub.

Initialize the microSD card within the Tapo app.
Local Recording

Reset

Reset Hub
Use a pin to press and hold the RESET button for about 5 seconds.

Reset Camera
Press and hold the SYNC/RESET button for about 5 seconds.
Reset

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU Declaration of Conformity may be found at https://www.tapo.com/support/ce/.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
The original UK Declaration of Conformity may be found at https://www.tapo.com/support/ukca/