BOSCH SPV4HMX55Q Dishwasher User Guide

: June 16, 2024
: Bosch

Table of Contents

BOSCH SPV4HMX55Q Dishwasher
Product Information
Setting up
Programmes
PRODUCT OVERVIEW
Cleaning filters
Troubleshooting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BOSCH SPV4HMX55Q Dishwasher

Product Information

Specifications

Product : Dishwasher
Model : SPV4HMX55Q
Power Consumption : 0.650 – 1.200 kWh
Water Consumption : 7.0 – 14.5 liters

Setting up Home Connect

Before using the dishwasher for the first time, it is important to read the instruction manual and safety information provided.

To set up the Home Connect feature:

Install the Home Connect app on your mobile device and follow the instructions.
Scan the QR code with the Home Connect app.

Overview of Water Hardness Settings

The dishwasher offers various water hardness settings. Refer to the table below for the corresponding values:

Hardness Range	Setting Value
Soft: 0 – 1.1 mmol/l	H00
Soft: 1.2 – 1.4 mmol/l	H01
Medium: 1.5 – 1.8 mmol/l	H02
Medium: 1.9 – 2.1 mmol/l	H03
Medium: 2.2 – 2.9 mmol/l	H04
Hard: 3.0 – 3.7 mmol/l	H05
Hard: 3.8 – 5.4 mmol/l	H06
Hard: 5.5 – 8.9 mmol/l	H07

Adding Special Salt

To avoid damage to the appliance, follow these steps to add special salt:

Unscrew the lid of the dispenser for special salt and remove.
If it is the initial start-up, fill the dispenser with water.
Add the special salt to the dispenser. Do not add detergent.
Place the lid back on the dispenser and turn to close.

Adding Rinse Aid

To ensure optimal cleaning and drying results, follow these
steps to add rinse aid:

Press the catch on the lid of the dispenser for rinse aid and
lift.
Add rinse aid up to the maximum mark.
Close the lid of the dispenser for rinse aid.

Programmes

The dishwasher offers various programmes with different
durations, energy consumption, and water usage:

Programme	Duration [h:min]	Energy [kWh]	Water [l]
Programme 1	1:55 – 2:05	1.090 – 1.200	10.5 – 13.0
Programme 2	1:35 – 2:40	0.650 – 1.100	7.0 – 14.5
Silence 50	4:00	0.800	9.6
Machine Care	2:10	1.130	15.0

How to Use Your Appliance

Load the tableware, ensuring it is suitable for dishwashers and removing large food remnants.
Add detergent to the dry detergent dispenser.
Switch on the appliance.
Select the desired programme.
Start the programme.
Remove the tableware at the end of the programme.
To cancel the programme, press and hold the cancel button for approximately 4 seconds.

Cleaning Filters

It is important to clean the filters regularly. Follow these steps:

After each wash, check the filters for residue.
Turn the coarse filter anticlockwise to remove it for cleaning.

FAQ

Q: How do I connect my appliance to the Home Connect app?
- A : Install the Home Connect app on your mobile device, follow the instructions, and scan the QR code provided.
Q: When should I add special salt?
- A : Only add special salt to the dispenser just before starting a programme.
Q: How much rinse aid should I add?
- A : Fill the dispenser for rinse aid up to the maximum mark.
Q: Can I cancel a programme?
- A : Yes, you can cancel a programme by pressing and holding the cancel button for approximately 4 seconds.

Before using for the first time, read the instruction manual and the safety information it contains.

Setting up

Setting up Home Connect

Tip : Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect app.

Install the Home Connect app on your mobile device and follow the instructions.
Scan the QR code with the Home Connect app.

Overview of water hardness settings

You can find an overview of thewater hardness values that can be selected here. A table of country-specific units can be found in the instruction manual.

Setting the water softening system
1. Press ⁠
2. To open the basic settings, press for 3 seconds.
a The display shows
a The display shows ⁠.
3. Press repeatedly until the right water hardness has been set.
4. To save the settings, press for 3 seconds.

Programmes

The programme data has been measured in the laboratory according to European standard EN 60436.
The consumption figures depend on the programme and additional function selected.
The running time will change if the rinse aid system is switched off or rinse aid needs to be added.

PRODUCT OVERVIEW

BOSCH-SPV4HMX55Q-Dishwasher-fig4

Adding special salt

To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the programme starts.

Unscrew the lid of the dispenser for special salt and remove.
On initial start-up: Fill the dispenser right up with water.
Add the special salt to the dispenser. The water in the dispenser is displaced and forced out. Never add detergent.
Place the lid back on the dispenser and turn to close.

Adding rinse aid

1. Press the catch on the lid of the dispenser for rinse aid 1 and lift 2 ⁠.

2. Add rinse aid up to the max mark. max
3. Close the lid of the dispenser for rinse aid. a The lid clicks into position.

Adding detergent

Add the detergent to the dry detergent dispenser.
Close the lid of the detergent dispenser.
a The lid clicks into position.

How to use your appliance

Load the tableware. Only clean tableware that is suitable for dishwashers. Remove large remnants of food from the tableware. Check that the spray arms can rotate freely.
Add detergent.
Switch on the appliance ⁠.
Select the programme.
Start the programme ⁠.
Remove the tableware at the end of the programme.
To cancel the programme, press for approx. 4 seconds.
The programme is cancelled and ends after approx

Cleaning filters

After each wash check the filters for residue.
Turn the coarse filter anticlockwise 1 and remove the filter system 2 ⁠.
Pull down the micro filter to remove.
Press the locking catches 1 together and lift the coarse filter out 2.
Clean the filter elements under running water.
Re-assemble the filter system.
Insert the filter system into the appliance and turn the coarse filter clockwise. Make sure that the arrow markings match up.

Cleaning spray arms

1. Unscrew the upper spray arms 1 and pull down to remove 2.
Pull up the lower spray arm to remove.
1. Check the outlet nozzles on the spray arms for blockages under running water and remove any foreign bodies.
Insert the lower spray arm. a The spray arm clicks into position.
Insert the upper spray arms and screw firmly in place.

Clean wastewater pump

Disconnect the appliance from the power supply.
Remove the filter system.
Scoop out any water.
Prise off the pump cover using a spoon and grip it by the crosspiece.
Lift the pump cover inwards at an angle and remove.
Remove any remnants of food and foreign bodies in the area of the impeller.
Insert the pump cover 1 and press down 2⁠. a The pump cover clicks into position.
Install the filter system.