velbus VMBDALI DALI Gateway with Built-in DALI Power Supply Instruction Manual

June 7, 2024
VELBUS

velbus VMBDALI DALI Gateway with Built-in DALI Power Supply -
logo

Read and understand this manual and all safety signs before using this appliance. Keep this manual for future reference.

DESCRIPTION

Velbus-DALI Gateway with built-in DALI power supply

USE AND CONFIGURATION

Use the VMBDALI to control a DALI device or bus system through the Velbus home automation system.

  1. Connect the Velbus bus and DALI bus (fig. 1).
  2. If no other DALI power supply is present, activate the VMBDALI internal DALI power supply. To do so, load the VMBDALI configuration page in the VelbusLink configuration software. Caution: 1 DALI bus may only contain 1 active DALI power supply. Make sure that no other  DALI power supply is activated prior to activating the VMBDALI internal DALI power supply.
  3. Configure the DALI devices in VelbusLink (on the configuration page of the VMBDALI).
  4. Create actions between the VMBDALI channels and other Velbus channels in

VelbusLink.
(See installation guides on www.velbus.eu for more general information about Velbus.) STATUS LEDs:

  • PS LED: Velbus power supply voltage detected
  • Rx LED: Velbus CAN bus packet received
  • Tx LED: Velbus CAN bus packet sent
  • D1: Internal DALI power supply enabled
  • D2: DALI packet received
  • D3: DALI packet sent

STATUS:

  • 1 x flash: normal operation
  • 2 x flash: Velbus bus communication error
  • 3 x flash: DALI bus communication error

CONCISE TECHNICAL SPECIFICATIONS

Compatible with DALI and DALI-2
Supply voltage: 15 ± 3 VDC
Max. current consumption

  • internal DALI power supply enabled: 300 mA
  • internal DALI power supply disabled: 50 mA

DIN width: 2 modules
Controls up to 64 DALI devices, 16 groups, and 16 scenes.
Thermal and short-circuit protection.
For a detailed list with technical specifications, please refer to the product page on www.Velleman.EU
CIRCUIT DIAGRAM
See fig. 1

velbus VMBDALI DALI Gateway with Built-in DALI Power Supply
-

This product complies with all of the relevant European guidelines and regulations.

Velbus – Legen Heirweg 33, BE-9890 Gavere, Belgium – tel. +32 9 384 36 11 – e-mail: info@velbus.euwww.velbus.eu

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals