LEDone LED Troffers 2×2 Surface Mount Kit Installation Guide
- June 15, 2024
- LEDone
Table of Contents
Surface Mounting Kit Installation Guide
SAFETY INSTRUCTIONS: Read instructions carefully before attempting to
install fixture.
- All wiring should be performed by a qualified electrician.
- Disconnect power before installing or servicing. This fixture must be wired in accordance with the National Electrical Code and applicable local codes and ordinances.
- Proper grounding is required for safety.
CAUTION: Risk of fire
- WARNING: Make certain power is OFF before installing or maintaining fixture. No user serviceable parts inside.
- WARNING: Install recessed kit and fixture per local codes.
- WARNING: Do NOT handle energized fixture when hands are wet, when standing in wet or damp surfaces or water.
- WARNING: Do NOT mount near flammable materials or any heat.
- WARNING: Do NOT let power cords touch the hot surface.
- Fixture is for indoor and dry location only!!
SURFACE MOUNTING GUIDE:
- Assemble the 4 pieces of frame together and connect them with screws.
- Place the frame onto the wall with screws.
- Dismantle 1 piece of the frame and slide the LED fixture into the frame.
- Re-attach the 1 piece removed in Step 3.
Step 1
Step 2
Step 3
Step 4
Suitable for LOC-BLPL and LOC-TROF series
- 1×4
- 2×2
- 2×4
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>