Flowmed UV Mini Vacuum Cleaner Vac Clean Instructions
- June 15, 2024
- Flowmed
Table of Contents
CLEANING INSTRUCTIONS
MINI VACUUM CLEANER VAC-CLEAN UV®
The cleaning is divided into 4 sections:
Regular cleaning after use
After using the vac-clean uve mini-vacuum cleaner, the dirt and cerumen that has been sucked in collects in the transparent base attachment and the attachment nozzles used (brush, tube or RIC). The cerumen residues are larger and heavier than dust and are already deposited on the inner wall of the attachment nozzles (brush, tube or RIC) and also in the transparent base attachment. After each hearing aid cleaning, the attachment nozzles together with the base attachment should be separated from the device with a slight twisting and pulling motion and cleaned in an ultrasonic bath, e.g. u-sonic 2. Then rinse off any water residues well and dry off. The electronic drying cap e.g. dry-cap uv 3s can also be used for this purpose.
Cleaning as needed
The surface of the vac-clean uvs mini-vacuum cleaner should be wiped down
frequently with cleaning wet wipes according to view and need. The supply
chamber under the base attachment should also be wiped with the wet wipe. The
suction opening with a foam filter is located in the supply chamber. Dirt on
the foam filter should be lightly brushed off with the brush attachment
nozzle. When doing so, fix the filter slightly with your fingernail.
CAUTION: The foam filter must always be replaced. It protects your
device.
Foam filter replacement
We recommend changing the foam filter at least 4 times a year after prolonged
use of the vac-clean uvs. If the foam filter is visibly heavily soiled, it can
be levered out of the suction opening with tweezers, a pointed counterstad or
also with the brush attachment nozzle.
The supplied accessories include a chiffon bag with 20 replacement filters.
The new foam filter is to be inserted into the suction opening and the
transparent base attachment is to be put back on with a twisting motion.
ATTENTION: The foam filter must always be reinserted. It protects your
device. TIP: Store the dirty foam filters. They can be easily cleaned in the
sealed chiffon bag in an ultrasonic bath, e.g. u-sonic 2, and thus reused. For
delicate filter changes, the service of the hearing care professional can
help. Please also observe the instructions for use of the vac-clean uvs.
Replacement-Set
If individual parts wear out or are lost after prolonged use we offer the possibility of replacing them via an optional Replacement-Set. The Replacement-Set contains: 5 pcs. bags black with 20 pcs. foam filters each, 1 pcs. Base nozzle transparent, 2 pcs. Brush nozzle, 2 pcs. Tube nozzle and 2 pcs. RIC nozzle.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>