WMF Bueno Kettle Instruction Manual

: June 3, 2024
: WMF

Table of Contents

WMF Bueno Kettle
Important safety instructions
Prior to use
Safety instructions
Initial operation
Cleaning and maintenance
Descaling
For UK use only
Consumer Service
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WMF Bueno Kettle

WMF-Bueno-Kettle-PRODUCT

Important safety instructions

These devices can be used by children older than eight years old as well as by persons with limited physical, sensory or mental capabilities, persons lacking experience and/or lacking knowledge if they are supervised or have received instructions regarding how the device is to be used safely and have understood the resulting risks. Children shall not play with the device. Cleaning and user maintenance shall not be made by children, unless they are older than 8 years old and supervised.
Keep the device and its cord out of the reach of children under 8 years old.
Only operate the electric kettle with the appropriate base.
Boiling water may splash out if the device is overfilled or operated when the lid is not closed.
Do not immerse the pot and base in water.
Take care not to spill water on the base.
Caution! Risk of burns! The temperature of accessible surfaces can become very hot. They also remain hot for some time after the appliance has been switched off.
After using the appliance and accessories, clean all surfaces/parts that have come into contact with food. Follow the instructions in the “Cleaning and care” section.
Always use the appliance in accordance with these instructions. Improper use can result in electric shocks and other hazards.
If the appliance’s supply cord is damaged then it must be replaced by the manufacturer’s central customer service department or by a similarly qualified person. Improper repairs may constitute a serious threat for users.
This device is intended to be used in household and similar applications, such as:
- offices and other working environments;
- farmhouses;
- by clients in hotels, motels and other residential-type environments;
- bed and breakfast type environments.

The device is not intended for purely commercial use.

Prior to use

Read the operating manual carefully. It contains important information about the use, safety and maintenance of the appliance. It should be kept in a safe place and passed on to further users if appropriate. The device may only be used for the intended purpose according to these operating instructions. Observe the safety instructions during use.

Technical Data

Rated voltage: 220-240 V~ 50-60 Hz
Power consumption: 2000
Protection class: I

Safety instructions

Only connect the device to properly installed earthed sockets. The wire and plug must be dry.
Do not pull the connecting cable over sharp edges or clamp it. Do not let it hang down and protect it from heat and oil.
Never disconnect the mains plug from the socket by the cord or with wet hands.
Stop using the appliance and/or disconnect it from the mains plug immediately if:
- The appliance or mains cable is damaged;
- the device is not leak-proof;
- there is any suspicion of a fault after dropping the appliance or similar. In such cases, send the appliance to be repaired.
Do not place the kettle on hot surfaces, such as hot plates or similar, or near open flames. It could melt.
Do not place the device on water-sensitive surfaces. Water spray may damage them.
Do not operate the device under delicate furniture. Escaping steam from boiling could damage the furniture.
Never operate the kettle unattended.
Do not switch on the device without water.
Take the pot for filling from the base.
Only fill with clean water, not milk, coffee, etc.
Do not move the device during operation and do not pull on the mains cable.
Caution: the device is hot. Risk of scalding from escaping steam. Only take hold of the hot kettle from the handle and do not open the lid when pouring.
Always completely empty the pot. Do not let any residual water remain in the device for a long period of time.
The mains plug is to be pulled:
- if malfunctions occur during use,
- before cleaning and care,
- after use.
No liability is accepted for any damages resulting from misuse, incorrect operation or improper repairs. Claims under warranty are likewise excluded in such cases.
Packaging materials, such as plastic film bags, do not belong in the hands of children.

Initial operation

Clean the inside of the kettle thoroughly before using it for the first time. To do this, open the lid as shown in the picture. A strainer in the pouring spout ensures that large pieces of limescale are filtered out when pouring. The part of the connection cable which is not required can be wound up in the base unit. Connect the mains plug to an earthed socket. Fill with as much water as needed to be able to see the level on the water level indicator, although do not go above the Max mark. Close thelid. Only in this way will the automatic boil-stop function work reliably. Place the kettle in any position on the base unit. Only after this has been done can you press downwards on the on/off switch under the handle. The on/off switch only functions when the kettle is standing on the base unit. Do not use the first quantity of boiled water for food preparation

Automatic switch-off
Shortly after the water has started to boil, the automatic switch-off function will shut down the kettle automatically. If the kettle is filled with only a small quantity of water, the switch-off period will be increased. If you require warm but not boiling water, the heating process can be interrupted at any time by pressing the ON switch. The appliance will then shut down automatically as soon as the kettle is removed from the base.
For functional reasons, a small amount of condensed water may run out through the openings at the bottom of the handle and onto the rim of the base. This is due to technical reasons and does not impair the safety of the appliance.

Safety system
If the kettle is accidentally operated without water, a thermostat protects the kettle from overheating by switching off the appliance. Make sure to allow the kettle to cool down before filling it with water. If the first thermostat should fail due to misuse, an additional temperature limiter offers reliable protection.

Cleaning and maintenance

Disconnect the appliance from the mains and allow it to cool down. Never immerse the appliance in water; simply wipe it over using a damp cloth with a drop of washing-up liquid and then rub dry. Do not use harsh or abrasive cleaning agents. The bottom of the kettle is made of stainless steel. If you notice rust stains all the same, these are only deposits sticking to the surface. Remove these immediately with a cleaning agent for stainless steel. The mesh filter in the spout can be pulled off to clean when the lid is open. To remove, press up the top lug. When inserting, place the mesh filter centrally against the bar and then latch it home to the front.

Descaling

Please descale your appliance regularly using a high-quality commercial descaling agent. Follow the manufacturer’s instructions, particularly with regard to the subsequent cleaning with clear water, which is essential! Suitable descaling agents contain inhibitors that protect appliances against damage to seals and surfaces, do not cause additional deposits and have no taste. Do not use descaling agents that are unsuitable for your appliance (such as substances based purely on vinegar or citric acid). Our warranty does not cover damage caused by using unsuitable descaling agents or failure to follow the descaling instructions. Please keep descaling agents out of reach of children and make sure you do not inhale any of the steam given off during descaling.

For UK use only

This product is supplied with a 13 A plug conforming to BS 1363 fitted to the mains lead. If the plug is unsuitable for your socket outlets or needs to be replaced, please note the following. If the plug is a non-rewireable one, cut it from the mains lead and immediately dispose of it. Never insert it into a socket outlet as there is a very great risk of an electric shock.
The replacement of the plug at the mains lead has to be done according to the following instructions:
Important: The wires in this mains lead are coloured in accordance with the following code:
blue Neutral
brown Live
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
- the wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black,
- the wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
If a 13 A (BS 1363) plug is used it must be fitted with a 13 A fuse conforming to BS 1362 and be ASTA-approved. If any other type of plug is used, the appliance must be protected by a 10 A fuse either in the plug or adapter or at the distribution board. If in doubt – consult a qualified electrician.
Never use the plug without closing the fuse cover.

he appliance complies with European directives 2014/35/EU, 2014/30/EU and 2009/125/EU. At the end of its life, this product may not be disposed of in normal household waste, but must instead be taken to a collection point for recycling electrical and electronic appliances. The materials are recyclable in accordance with their labelling. Reuse, recycling and other ways of reutilising old appliances make an important contribution to protecting our environment. Please ask your local authorities for information about the appropriate disposal point. End users are personally responsible for deleting any personal data that may be stored on appliances they are disposing of. Subject to change