velbus VMB4IRT 4 Channel Transmitter Instructions

: June 5, 2024
: VELBUS

Table of Contents

ABOUT US
CONTACT INFORMATION:
- Specifications
How to setup your remote control
HOME CENTER
HOME CENTER INTERFACE SERVER
INCLUDED:
SPECIFICATIONS:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

4 Channel transmitter
VMB4IRT
short user manual

Velbus Home Automation
Choosing Velbus is choosing comfort, safety and energy saving with the guarantee that your home is ready for the future. All this for a price barely higher than that of a traditional installation.

ABOUT US

The Velbus® configuration in our premises groups over 150 modules and 38 temperature sensors. Velleman® nv has been an important wholesaler and developer of electronics for almost 40 years and has its own research and development department.
With over 120 employees, a 6,000 m2 warehouse, and offices around the world, Velleman nv is an important international player in the electronics industry.

CONTACT INFORMATION:

Velleman NV
Legen Heirweg 33
B-9890 Gavere, Belgium
+32 9 384 36 11 +32 9 384 67 02
info@velbus.eu · www.velbus.eu · www.velleman.eu

http://www.velbus.eu/

Specifications

protocol: modified RECS80 / 38 kHz carrier
range: up to 10 m
dimensions: 88x37x13mm / 3.46×1.45×0.5″

How to setup your remote control

In order to be able to use the VMB4IRT remote control with your device, the remote and/or your device must be configured in the correct way. First, remove the 3 screws at the back of the remote and open the unit. Next, select your device from the list below and follow the appropriate setup procedure.

Note: The devices listed below are supported at time of printing. Please check www.velleman.be for an up to date list, as devices might have been added.

For use with the VMB4PD
• Press and hold the Mode’-button of the remote • Press and hold button3’of the remote. The indicatorled of the remote will flash briefly every 3s.
• Watch the VMB4PD closely.
• As soon as button 1 of the page you wish to control is activated, release all buttons of the remote.
• The 3 remaining buttons of the page are controlled with button 2, 3 and 4 of the remote.
• This procedure can take a couple of minutes, depending on the address setting of the VMB4PD
• Close the remote by means of the 3 screws
• You device is ready to be used
For use with the VMB8IR / VMBGPOB / VMBGPOW
Activate the infrared feature in the VelbusLink software if you want to control the VMBGPOW/VMBGPOB with the 4-channel infrared transmitter `VMB4IRT’.|
---|---

The 4-channel infrared transmitter by default operates the first page of the VMBGPOB/VMBGPOW. If you want to control other pages, follow the procedure below:

Press and hold `Mode’-button of the remote
Press and hold button `2′ of the remote. The indicatorled of the remote will flash briefly every 3s.
Watch the VMB8IR / VMBGPOB / VMBGPOW closely.
As soon as the desired channel of the VMB8IR or button 1 of the VMBGPOB / VMBGPOW page you wish to control responds, release all buttons of the remote.
The 3 following channels/buttons are controlled with button 2, 3 and 4 of the remote.
This procedure can take a couple of minutes, depending on the address setting of the VMB8IR / VMBGPOB / VMBGPOW.
Close the remote by means of the 3 screws
You device is ready to be used
– 5 –

HOME CENTER

OPERATE YOUR HOME EVERYWHERE
Home center is a software interface for your home automation system. This software is developed by Stijnen Solutions. Ideal to operate via touch screen, pc, or mobile device. All home automation functions are available in one central place.

WHY HOME CENTER?

You adjust the software layout according to your needs.
See which indoor and outdoor lights are switched on in one glance
Receive an overview of the current temperatures and thermostat settings in every room
Operate shutters and blinds
Activate a mood function and enjoy the result without delay
Monitor the cameras
Take advantage of all the handy extras included in the software

MORE INFORMATION AND DEMO VIDEOwww.homecenter.be

HOME CENTER INTERFACE SERVER

The VMBHIS is the ultimate hardware solution for the use of Stijnen Solutions Home center.
A ready-to-use solution to operate your Velbus® installation via your iPhone, iPad, iPod touch, Windows or web browser.
Moreover, it’s an ecological solution, as this server module only uses 5 W in full operation mode.
In addition to the box contents, all you need is a functioning Velbus® installation with a VMB1USB or VMBRSUSB communication module.