ACURITE 00274 Instant Read Thermometer Instruction Manual
- June 7, 2024
- Acurite
Table of Contents
ACURITE 00274 Instant Read Thermometer
Instructions for use
- Press power button to power on. Press “ºF/ºC” button to select degree units.
- Insert probe into thickest part of meat. Be sure tip is not touching bone, gristle, the pan or inserted in cavity of fowl.
- After approximately 5-10 seconds a beep sounds and the numbers stabilize to indicate the temperature.
- Pressing the hold button will keep the highest observed temperature on the display and will beep when the temperature stabilizes. The screen will say “hold” when the function is activated.
- Wash probe with hot, soapy water after use to prevent cross-contamination.
To calibrate
This unit has been calibrated and should read temperature accurately. To verify accuracy, fill a container with crushed ice and add water. Wait approximately 1 minute. Insert 2″ of the probe into ice bath for 10 seconds, or until the temperature reading stabilizes. If unit doesn’t read 32°F/0°C, turn adjusting screw left or right to correct the temperature to 32°F/0°C.
WARNING:
DO NOT wipe or handle hot thermometer with wet cloth. DO NOT lay hot
thermometer on cold or wet surface. DO NOT heat beyond thermometer’s
temperature capacity. DO NOT use in oven. DO NOT wash in dishwasher.
DO NOT submerse in water
Limited 1-Year Warranty
Register your product on AcuRite.com
References
- AcuRite Weather Monitoring | #1 Weather Station Brand in North America
- AcuRite Weather Monitoring | #1 Weather Station Brand in North America
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>