milwaukee HL-SF Spot-Flood Headlamp Instruction Manual

June 3, 2024
Milwaukee

milwaukee logo HL-SF Spot-Flood Headlamp
Instruction Manualmilwaukee HL-SF Spot-Flood
Headlamp

HL-SF Spot-Flood Headlamp

Picture section with operating description and functional description.
Text section with Technical Data, important Safety and Working Hints and description of Symbols.

milwaukee HL-SF Spot-Flood Headlamp - Figure 1milwaukee HL-SF Spot-Flood Headlamp - Figure
2milwaukee HL-SF Spot-Flood Headlamp - Figure
3

TECHNICAL DATA

BATTERY LAMP HL-SF
Rated Power input 5,5 W
Lighting time 4 h
Spot Mode High 4 h
Flood Mode High 10 h
Flood Mode Med 26 h
Flood Mode Low 2 h
Hybrid Mode 350 lm
Luminus flux 350 lm
Spot Mode High 150 lm
Flood Mode High 25 lm
Flood Mode Med 450 lm
Flood Mode Low 80
Hybrid Mode 4000 K
Colour rendering index (CRI) 4,5 V (3×1,5V)
Colour temperature LR03 / AAA
Battery voltage .0,1 kg
Battery type IP 52

Weight according EPTA-Procedure 01/2014
Protection class|

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.

SAFETY INSTRUCTIONS BATTERY LAMP
Warning: Do not direct the light beam at persons or animals and do not stare into the light beam yourself (not even from a distance). Staring into the light beam may result  in serious injury or vision loss.
Don‘t use this tool in wet areas .
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.

SAFETY INSTRUCTIONS BATTERY
This tool is designed to be powered by 3 LR03 / AAA batteries properly inserted into the instrument. Do not attempt to use with any other voltage or power supply.
Do not leave batteries within the reach of children.
Do not mix new and used batteries. Do not mix brands (or types within brands) of batteries.
Do not mix rechargeable and non-rechargeable batteries.
Install batteries according to polarity (+ / –) diagrams.
Properly dispose of used batteries immediately.
Battery acid may leak from damaged batteries under extreme load or extreme temperatures. In case of contact with battery acid wash it off immediately with soap and water.  In case of eye contact rinse thoroughly for at least 10 minutes and immediately seek medical attention.
Warning! To reduce the risk of fi re, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach containing products, etc., can cause a short circuit.

SPECIFIED CONDITIONS OF USE
The headlight is intended to be used light independent use away from mains supply. The headlight is especially designed for head mounting. Do not use this product in any  other way as stated for normal use.

MAINTENANCE

The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
Use only Milwaukee accessories and spare parts. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents  (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the machine type printed as well as the six-digit No. on the label and order the drawing at your local  service agents or directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.

SYMBOLS

| CAUTION! WARNING! DANGER!
---|---
| Please read the instructions carefully before starting the machine.
| Do not stare at the operating light source.
| Class III electrical protection.
****| This tool is only suitable for indoor use. Never expose tool to rain.
| Do not dispose electric tools, batteries/rechargeable batteries together with household waste material.
Electric tools and batteries that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
Check with your local authority or retailer for recycling advice and collection point.
| European Conformity Mark
| British Confomity Mark
| Ukraine Conformity Mark
| EurAsian Conformity Mark

Copyright 2020
Techtronic Industries GmbH
Max-Eyth-Str. 10
71364 Winnenden
Germany
+49 (0) 7195-12-0
www.milwaukeetool.eu
Techtronic Industries (UK) Ltd
Fieldhouse Lane
Marlow Bucks SL7 1HZ
UK

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals