ANKER A7507011 USB 3.0 4-Port Portable Aluminum Hub User Guide

ANKER A7507011 USB 3.0 4-Port Portable Aluminum Hub

Package Contents

• USB 3.0 4-Port Portable Aluminum Hub
• Velcro installation strip
• Welcome Guide

Features

• Compact grab-and-go size provides portability while the velcro strip allows for a fixed position.
• Saves on sync time with data transfer rates of up to 5 Gbps (much faster than USB 2.0).
• Horizontally-positioned ports give a wider berth for oversized USB connectors.
• Powered solely through the USB connection to eliminate the need for a bulky adapter.
• Built-in surge protector keeps your devices and data safe and supports hot swapping.
• Compatible with USB 2.0 and 1.1 specifications; no drivers required for Windows XP / Vista / 7 / 8 and Mac OS X 10.2 and above.

Specifications

/ 3.3 × 1.8 × 1.1in (L × W × H)

Weight| 98g / 3.9oz
Input Interface| USB 3.0 type A
---|---
Output Interface| USB 3.0: 4 type A ports with maximum speeds of up to 5Gbps
Supported Systems| Windows 8 / 7 / Vista / XP or Mac OS X 10.2 and above.
Safety Approval| CE, FCC, RoHS

Instructions

• Connect the hub to an active port on your computer. You will now be able to connect devices to the hub for access to USB 3.0 connections with delivery speeds of up to 5Gbps.
• To achieve maximum performance, your computer system, peripherals, cables, and software must all support USB 3.0.

Usage Tips

1. For maximum performance, connected devices should not exceed a combined current of 900mA, otherwise connections may become unstable or disconnect entirely.
   For reference, the devices below are often rated as:

2. 2.4GHz wireless devices, MIDI devices and some USB 3.0 devices may not be supported. Try using the host port or a USB 2.0 connection.
3. The hub will sync but not charge tablets and other devices which require a higher power input.

ATTENTION

1. Do not tamper with this product or expose it to excessive heat, humidity, or direct sunlight.
2. We are not responsible for any damage to drives or hard disk data caused by improper use and/or disassembly. Please use this product according to its instructions.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A7507 is in compliance with Directive 2014/30 /EU & 2011/65/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com

Anker Technology (UK) Ltd I Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom
Anker Innovations Deutschland GmbH I Georg-Muche- Strasse 3-5, 80807 Munich, Germany
Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

GB Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A7507 is in compliance with the following Directives:
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
Electromagnetic Compatibility Regulations 2016
The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com
Anker Technology (UK) Ltd
Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio / TV technician for help.

This device complies with Industry Canada license – ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

support@anker.com

For FAQs and more information, please visit:anker.com/support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>