Energizer STEP 3-Wireless Chime EOD1-1003-CHM User Guide
- June 7, 2024
- Energizer
Table of Contents
Use this guide to finalize the setup of your Wireless Chime.
Wireless Chime Features 
System Specifications
Power| DC 5V, USB power supply
Reset Button| To enter Pairing Mode; Quickly click the reset button once. The
Indicator Light will start blinking continuously.
To restore factory settings; Hold down the reset button for 5 seconds. The
Indicator Light will blink 3 times, then go solid.
Indicator Light| Blinking
Solid| Pairing Mode
Paired to Smart Video Doorbell
©2021 Energizer. Energizer and certain graphic designs are trademarks of
Energizer Brands, LLC, and related subsidiaries and are used under license by
Jem Connected 10T, Inc. All other brand names are trademarks of their
respective owners. Neither Jem Connected 10T, Inc. nor Energizer Brands, LLC
is affiliated with the respective owners of their trademarks.
1. First, make sure your doorbell’s Chime Setting is set to “Wireless
Chime” in the app.
You can set this when accessing your doorbell for the first time, or later in
your doorbell’s settings.
2. Plug your Wireless Chime into a wall outlet using the included USB
Power Adapter.
NOTE: Wireless Chime should be plugged into a wall outlet within 30ft of
the doorbell.
3. To enter Pairing Mode, quickly click the Reset Button on the back of
your Wireless Chime.
For Multiple Chimes:
Make sure all your Wireless Chimes are in pairing mode at the same time before
moving on to Step 4. This includes previously added Wireless Chimes.
4. Go to the Bell Settings within the Chime Settings of the doorbell.
Click the BIND button.
The light on the Wireless Chime should stop blinking. Your Wireless Chime is
now paired to your doorbell.
NOTE: Bell Settings will only appear after you have selected Wireless
Chime as the Chime Type.
Troubleshooting:
If your Wireless Chime is not ringing when you press your doorbell| Factory
reset the Wireless Chime by holding down the Reset button on the back of the
Wireless Chime for 5 seconds. The indicator light will blink three times and
then go solid. Now Repeat Steps 1-4.
---|---
If you don’t see “Add” in Step 4| First, click the Remove/Unbind button, go
back to the previous menu, and re-enter Ring Settings. Double-check your
Wireless Chime is still blinking and then click the “BIND” button. Your
Wireless Chime should now stop blinking and be paired to your doorbell.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>