AcuRite 02067M Digital Thermometer with Wired Sensor Instruction Manual
- June 7, 2024
- Acurite
Table of Contents
Instruction Manual
Thermometer with Wired Sensor
model 02067
Questions? Contact Customer Support at
877-221-1252 or visit
www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference.
Unpacking Instructions
Remove the protective film that is applied to the LCD screen prior to using this product. Locate the tab and peel it off to remove it.
Package Contents
- Display with Wired Temperature Sensor
- Instruction Manual
Features & Benefits
FRONT
-
Current Sensor Temperature
-
Current Display Temperature or Humidity
-
° or % Indicators
Indicates either temperature or relative humidity is being displayed. -
Auto-Cycle Icon
Indicates the display will automatically toggle between display temperature and humidity. -
Low Battery Indicator
-
Wired Temperature Sensor with Adhesive Pad
BACK -
Battery Compartment Cover
-
SELECT Button Press to manually cycle through display temperature and humidity readings, or to select Auto-Cycle mode.
-
Integrated Hang Hole For easy wall mounting.
-
RESET Button For full reset to factory defaults.
-
°F/°C Button For selecting temperature units.
-
Battery Compartment
SETUP
Install or Replace Batteries AcuRite recommends high-quality alkaline batteries in the sensor for the best product performance. Heavy duty or rechargeable batteries are not recommended.
- Slide off the battery compartment cover.
- Insert 2 x AAA batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment.
- Replace the battery cover.
Select Temperature Units
To select between degrees Fahrenheit (°F) or Celsius (°C) temperature units,
press and release the “°F/°C” button, located on the back of the display.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY
AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior
to battery installation. Remove batteries from equipment that will not be used
for an extended period of time. Follow the polarity (+/-) diagram in the
battery compartment. Promptly remove dead batteries from the device. Dispose
of used batteries properly. Only batteries of the same or equivalent type as
recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose
of batteries in fire, as batteries may explode or leak. DO NOT mix old and new
batteries or types of batteries (alkaline/standard). DO NOT use rechargeable
batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit
the supply terminals.
Placement for Maximum Accuracy
AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display and wired temperature sensor is critical to the accuracy and performance of this product.
Sensor Placement
Place the display in a dry area free of dirt and dust. Display stands upright
for tabletop use or is wall-mountable.
To observe outdoor temperatures, the wired sensor must be placed outside. The
sensor can be securely mounted by using the adhesive pad or the integrated
hang hole. Take care not to damage the wired sensor during mounting.
Important Placement Guidelines
- To ensure accurate temperature measurement, place display and wired sensor out of direct sunlight and away from heat sources or vents.
- The wired temperature sensor is not waterproof and is not intended for permanent submersion in liquids. Submersion in liquid for more than 30 seconds may result in the failure of the wired sensor.
OPERATION
Display Modes
MANUAL: By default, the unit is in Manual Mode. While in Manual Mode,
press and release the “SELECT” button, located on the back of the display, to
manually cycle through readings.
AUTO CYCLE: In AUTO-CYCLE mode, the display will automatically cycle
through current readings for display temperature and humidity.
To enter AUTO-CYCLE mode, press and release the “SELECT” button on the back of
the display until the icon appears on the screen. Press and release again to
exit AUTO-CYCLE mode.
Troubleshooting
| Problem | Possible Solution |
|---|
Inaccurate ate
temper nature| • Make sure both the displays and wired tem perature
sensor are placed out of direct sunlight and awa y
from any heat sources or vents.
Display screen
not working| • Check that the batters ies are installed cor rectal y.
Batt er ies may need to be replaced.
Specifications
| TEMPERATURE RANGE | Display: 32°F to 122°F; 0°C to 50°C |
|---|
Wired Sensor: -58°F to 158°F; -50°C to 70°C
HUMIDITY RANGE| Display: 1% – 99% RH (relative humidity)
POWER| 2 x AAA alkaline batteries
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
- This device may NOT cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
NOTE: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment. This device complies
with Industry Canada licence-exempt RSS standard(s).
Customer Support
AcuRite customer support is committed to providing you with best-in-class
service. For assistance , please have the model number of this
product available and contact us in any of the following ways:
Visit us at www.AcuRite.com
- Installation Videos
- Register your Product
- Instruction Manuals
- Support User Forum
- Replacement Parts
- Submit Feedback & Ideas
Limited 1-Year Warranty
AcuRite is a wholly-owned subsidiary of Chaney Instrument Company. For
purchases of AcuRite products, AcuRite provides the benefits and services set
forth herein. For purchases of Chaney products, Chaney provides the benefits
and services set forth herein.
We warrant that all products we manufacture under this warranty are of good
material and workmanship and, when properly installed and operated, will be
free of defects for a period of one year from the date of purchase.
Any product which, under normal use and service, is proven to breach the
warranty contained herein within ONE YEAR from the date of sale will, upon
examination by us, and at our sole option, be repaired or replaced by us.
Transportation costs and charges for returned goods shall be paid for by the
purchaser. We hereby disclaim all responsibility for such transportation costs
and charges. This warranty will not be breached, and we will give no credit
for products that have received normal wear and tear not affecting the
functionality of the product, been damaged (including by acts of nature),
tampered, abused, improperly installed, or repaired or altered by others than
our authorized representatives.
Remedy for breach of this warranty is limited to repair or replacement of the
defective item(s). If we determine that repair or replacement is not feasible,
we may, at our option, refund the amount of the original purchase price.
THE ABOVE-DESCRIBED WARRANTY IS THE SOLE WARRANTY FOR THE PRODUCTS AND IS
EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. ALL OTHER
WARRANTIES OTHER THAN THE EXPRESS WARRANTY SET FORTH HEREIN ARE HEREBY
EXPRESSLY DISCLAIMED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTY OF
MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE.
We expressly disclaim all liability for special, consequential, or incidental
damages, whether arising in tort or by contract from any breach of this
warranty. Some states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or exclusion may not apply
to you.
We further disclaim liability from personal injury relating to our products to
the extent permitted by law. By acceptance of any of our products, the
purchaser assumes all liability for the consequences arising from their use or
misuse. No person, firm or corporation is authorized to bind us to any other
obligation or liability in connection with the sale of our products.
Furthermore, no person, firm or corporation is authorized to modify or waive
the terms of this warranty unless done in writing and signed by a duly
authorized agent of ours.
In no case shall our liability for any claim relating to our products, your
purchase or your use thereof, exceed the original purchase price paid for the
product.
Applicability of Policy
This Return, Refund, and Warranty Policy apply only to purchases made in the
United States and Canada. For purchases made in a country other than the
United States or Canada, please consult the policies applicable to the country
in which you made your purchase.
Additionally, this Policy applies only to the original purchaser of our
products. We cannot and do not offer any return, refund, or warranty services
if you buy products used or from resale sites such as eBay or Craigslist.
Governing Law
This Return, Refund, and Warranty Policy is governed by the laws of the United
States and the State of Wisconsin. Any dispute relating to this Policy shall
be brought exclusively in the federal or state courts having jurisdiction in
Walworth County, Wisconsin; and purchaser consents to jurisdiction within the
State of Wisconsin.
It’s More than Accurate, it’s 
AcuRite offers an extensive assortment of precision instruments, designed to
provide you with information you can depend on to
Plan your day with confidence.
©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights are the property of their respective owners. AcuRite uses patented technology. Visit www.AcuRite.com/patents for details.
Printed in China 02067 INST 091316
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>